可雇用Electrical Engineers

  • 电气工程
建议:
更多

国家

精确位置

测验

时薪 (美元)

级别

在线

Showing 226 results
  • 雇用Euroaccount

    Euroaccount

    Russian Federation
    $40 USD / hour
    Mechanical Engineer, Electrical Engineer
    Russian Federation
    7.2
    22条评论 $40 美元/小时
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using Altium designer, Eagle CAD, Allegro, CADSTAR, PADS, Protel99.. - Product design and mechanical design in Solidworks. 收起
  • 雇用dalong243020

    dalong243020

    China
    $30 USD / hour
    Software(C++/Embedded System)& Electronic Engineer
    China
    5.8
    7条评论 $30 美元/小时
    I'm a qualified Software(C++ /Embedded System) and electronics engineer having rich 18 years+ experiences. Have worked with following peripherals & technologies: - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C#...
    I'm a qualified Software(C++ /Embedded System) and electronics engineer having rich 18 years+ experiences. Have worked with following peripherals & technologies: - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Developed numerous C libraries for using sensors and shields with STM32 ARM and have experience of creating a device from scratch, doing both firmware and PCB development (Autodesk Eagle CAD). Kind regards. 收起
  • 雇用levstremetskyi80

    levstremetskyi80

    China
    $35 USD / hour
    PCB/Firmware/Product3D/Manufacturing
    China
    6.9
    36条评论 $35 美元/小时
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional...
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. 收起
  • 雇用bestworkontime9

    bestworkontime9

    India
    $15 USD / hour
    "Work Hard , Be Kind and Amaze things will Happen"
    India
    2.8
    1条评论 $15 美元/小时
    Hello, I am Individual Experienced Web Developer, work with a Highly Experienced IT professionals team having rich experience in Design and Development. Work in open source programming and developing innovative solutions on a range of platform including Magento,WordPress,WooCoomerce, prestashop, Core PHP,...
    Hello, I am Individual Experienced Web Developer, work with a Highly Experienced IT professionals team having rich experience in Design and Development. Work in open source programming and developing innovative solutions on a range of platform including Magento,WordPress,WooCoomerce, prestashop, Core PHP, MySQL. Much experience in Woo-Commerce Customization and Custom Plugin Modification at any level. Strengths: 1) have a total programming experience of over 6 years 2) take pride of my 5.0/ 5.0 rating, 3)100% completion rate, 4)99-100% on-Budget 5)100% on-time completion 6) work with team, and strictly bite only what I can chew! No fake promise...ever! 7) use most instant messengers for speedy communication 8) daily progress updates If you have any new business requirement from Scratches then it's the ever best destination for you. If you have any requirement ,just check your private message box and share the requirement with me and get solution Instantly to over from it. Thx! 收起
  • 雇用DreamCha

    DreamCha

    China
    $38 USD / hour
    Senior Electrical & Embedded System Engineer
    China
    6.1
    13条评论 $38 美元/小时
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With...
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With 15 years industry experience, my expertise are as follows: - Circuit & Schematic & PCB design - Prototype & Mass production - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485, Lora, NFC/RFID - Raspberry Pi using node.js, QT, etc. - various PLC & HMI programming such as Nextion, ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Mobile app development - C/C++, C#,VB, Embedded C/C++ I will do my best to complete your project quickly, and I will provide the best service of high quality. Thank you. 收起
  • 雇用xiaoqideng

    xiaoqideng

    China
    $30 USD / hour
    Embedded System & IoT Designer & Linux & Developer
    China
    6.0
    19条评论 $30 美元/小时
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing...
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing using Altium Design Tool and Simulation Tools 2) Firmware Development - Rich experiences in C/C++/Embedded C - I like using various of MPU, ARM, PLD and embedded system equipment STM32 family, NRF51822/52832/nRF52840, CC2540/CC2541/CC26xx, ESP8266/ESP32, PIC16F/18F/33F, Atmega family, 8051 family, Arduino, Atmel, - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Visual Studio, - Rich experience in variant peripherals: UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. - LED controlling wih Neopixels. I can adjust and work no matter what my client's timezone is. Thank you for your time! 收起
  • 雇用jinping8188257

    jinping8188257

    China
    $30 USD / hour
    3d modeling/rendering/Drafting/BIM/Product Design
    China
    3.9
    2条评论 $30 美元/小时
    Welcome to your visit!!! Designing tools: 3DS MAX, Google Sketchup, Cinema, Revit, Autocad, Lumion 8, Solidworks, freecad, catia, etc.(more than 18years) *******My skills is below*****************: == Product design, Modeling, Rendering Drawing of Building, interior and exterior I have strong appreciation...
    Welcome to your visit!!! Designing tools: 3DS MAX, Google Sketchup, Cinema, Revit, Autocad, Lumion 8, Solidworks, freecad, catia, etc.(more than 18years) *******My skills is below*****************: == Product design, Modeling, Rendering Drawing of Building, interior and exterior I have strong appreciation for working in a start-up culture and am experienced in scaling operations from the ground up. I am here to work for the client, implement my own ideas when the opportunity presents itself and bring a vision to life. My motto is "Get it done right the FIRST time" . Looking forward to build a healthy and long term business relationship with you. 收起
  • 雇用Lightcanon

    Lightcanon

    Egypt
    $20 USD / hour
    Communications & Electronics Engineering
    Egypt
    3.8
    11条评论 $20 美元/小时
    x86 assembly C/ C++/C# Micro-controllers Data Structures OOP Python Qt Digital Electronics Analog Electronics VHDL-Verilog-System verilog Matlab/Simulink Analog and Digital Communications
    x86 assembly C/ C++/C# Micro-controllers Data Structures OOP Python Qt Digital Electronics Analog Electronics VHDL-Verilog-System verilog Matlab/Simulink Analog and Digital Communications 收起
  • 雇用sajjadtaghvaeifr

    sajjadtaghvaeifr

    Japan
    $15 USD / hour
    PhD in Mechanical Engineering
    Japan
    3.7
    4条评论 $15 美元/小时
    I have got my PhD from department of bioengineering and robotics, Tohoku University, Japan. I have experience in teaching Mechanical engineering courses such as dynamics, Engineering drawing, control, etc. I have done many research projects and published 28 journal and conference papers in robotics, mechanism design,...
    I have got my PhD from department of bioengineering and robotics, Tohoku University, Japan. I have experience in teaching Mechanical engineering courses such as dynamics, Engineering drawing, control, etc. I have done many research projects and published 28 journal and conference papers in robotics, mechanism design, nonlinear dynamics, and control. 收起
  • 雇用CONFIDENTWRITERS

    CONFIDENTWRITERS

    Kenya
    $5 USD / hour
    ACADEMIC AND CONTENT WRITER
    Kenya
    2.6
    2条评论 $5 美元/小时
    HIRE ME VIA PROFILE LINK Hello there, I am a qualified and satisfied writer with over three years of experience in different areas of writing. In all that I do, my clients come in as first priority so as to ensure that they are satisfied in their career and academic work. Other than this, I am well versed with...
    HIRE ME VIA PROFILE LINK Hello there, I am a qualified and satisfied writer with over three years of experience in different areas of writing. In all that I do, my clients come in as first priority so as to ensure that they are satisfied in their career and academic work. Other than this, I am well versed with various referencing styles inclusive of MLA, Harvard, Chicago, Turabian and APA among others. Working with me in this industry will assure you of 100%timely delivering of orders, plagiarism free work, as well as confidentiality in any information that you will give me as a writer. Above all, I charge my services at FAIR PRICES and I DELIVER PROJECTS IN LESS THAN 24 HOURS. Just say HELLO 收起

你好,这是一些不在线的威客

你好,这是一些符合“”的不在线的威客