Embedded Engineers等待雇用

  • Embedded Systems
  • Online Users
建议:
更多

国家

精确位置

测验

时薪 (美元)

级别

在线

展示 77 结果
  • 雇用     venkatc3
雇用     venkatc3

    venkatc3 venkatc3

    India $30 美元/小时
    Embedded System Expert
    India
    5.1
    7条评论 7条评论 $30 美元/小时
    I am a professional Embedded software engineer having 6+ years of experience in this field. I have worked in multiple projects for clients from different domains like Automotive, Medical, Industrial and consumer electronics. I am also good in hardware design and development, So whether your project at concept phase or...
    I am a professional Embedded software engineer having 6+ years of experience in this field. I have worked in multiple projects for clients from different domains like Automotive, Medical, Industrial and consumer electronics. I am also good in hardware design and development, So whether your project at concept phase or in development i can give you the best solutions in the market. I am passionate about electronic and embedded systems so i love to do it and deliver the output at its best. I am well focused to accomplish your desired work within a very reasonable budget for you and off course, within a specific time span. Looking forward to work with you ! :) 收起
  • 雇用 venkatc3
  • 雇用     cesur135
雇用     cesur135

    cesur135 cesur135

    Turkey $15 美元/小时
    electr.electronics &Cont.Automation&Software Eng.
    Turkey
    3.7
    1条评论 1条评论 $15 美元/小时
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the...
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the automation scenario and then I worked with the SIEMENS WinCC SCADA program to monitor and control the system. I used the SIEMENS PH & INFORMATION SERVER program to report the units on a monthly, monthly and yearly basis and prepared templates for the reports. I did (PTP) point to point tests and automation tests when the units were switched on. I drew the Electricity Projects with the E plan P8 V2.6 program. In the field of process automation, I used the DELTA PLC program and the ABB PLC program to control each piece of equipment in the factory. In Energy Automation, I also worked in HES projects where I made the generators PLC and SCADA system. Ventilation systems of plants and enterprises were made according to the temperature of the environment, according to the working information of the machines and according to other factors. Ventilation system entered the circuit and worked in a certain place. I usually used ABB AC500 PLC program and ABB & SIEMENS drivers when doing these systems. I install &Comission Chocolate Machines,lines.And test all equipment then commission about process follow. I used Honeywell DCS C200 in iron steel industry and I comissioned this systems about part by part units In the field of electricity, I work actively in the fields of electric panel works, electricity projects and field applications of small enterprises in general. I used OMRON PLC some factory application with given scenario I wrote plc to control each equipment and depend on sensor etc.. I set up on the field instruments, configuration upper and lower limit values during setup, setup analogue 4.20 mA, 0-10 V. I made work such as parameter setting of ABB & SIEMENS drivers and softstarters. In Machine Automation ,I have done projects like machine process Automation and writing software depositor and other part of machines and there I used AB PLC –RS Logix 5000 and Factory talk. 收起
  • 雇用 cesur135
  • 雇用     shivkantverma
雇用     shivkantverma

    shivkantverma shivkantverma

    India $30 美元/小时
    Embedded & IoT Product Development Services
    India
    2.6
    1条评论 1条评论 $30 美元/小时
    I began my engineering career as an Embedded Developer. I have 7 years of experience in the field of embedded system and IoT(Internet of Things). Services : (One Stop Solution For All Technology Development Needs) * Firmware Development (Embedded C, C++, Python) * PCB Designing (Eagle, KiCAD, Altium) and...
    I began my engineering career as an Embedded Developer. I have 7 years of experience in the field of embedded system and IoT(Internet of Things). Services : (One Stop Solution For All Technology Development Needs) * Firmware Development (Embedded C, C++, Python) * PCB Designing (Eagle, KiCAD, Altium) and Assembly (SMT & THT) * Schematic Design & Development (Research & Development) * Product Development & Manufacturing Services * Embedded & IoT Development * 3D CAD Designing & 3D Printing Service Technologies: * Internet of Things(ESP8266, ESP32, Zigbee, LoRa, BLE, GSM modules) * 8051 Family of Controllers(Keil uvision) * PIC Family (MPLAB) * AVR Family (Atmel Studio) * Arduino (Arduino IDE) * Raspberry pi (Development on Linux Based boards) A multi-skilled developer can turn your ideas into physical products with on time project delivery. Below are some of my projects over the past years. 收起
  • 雇用 shivkantverma
  • 雇用     macroenergy
雇用     macroenergy

    macroenergy macroenergy

    Turkey $25 美元/小时
    Electronics Engineer
    Turkey
    2.2
    1条评论 1条评论 $25 美元/小时
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux...
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms -BLDC motor -Step motor -DC motor Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reade rand transmitter -Magneticreader PowerElectronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design -Easyeda -CAD files of manufacturers Embedded system -ESP32,ESP8266,modules -Bluetooth and Wifi -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas -STM32 -C2000 Matlab -Power Electronics simulation -Motor drive -WindEnergy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation (TI,National, LinearTech, Maximlibraries) -LTI -National -Matlab -Easyeda 收起
  • 雇用 macroenergy
  • 雇用     preetpalsingh33
雇用     preetpalsingh33

    preetpalsingh33 preetpalsingh33

    India $25 美元/小时
    Circuit, PCB Design, IOT, Android/IOS, 3D CAD/CAM
    India
    1.7
    1条评论 1条评论 $25 美元/小时
    I have done bachelor of Engineering in "Electronics and Communication" stream from Kurukshetra University Haryana India. Above 10+ years of experience on Circuit design, Schematic, Hardware design, PCB design, Firmware, C/C++, Micro Python, App (IOS/Android), Java, Flutter, React Native development. My Services...
    I have done bachelor of Engineering in "Electronics and Communication" stream from Kurukshetra University Haryana India. Above 10+ years of experience on Circuit design, Schematic, Hardware design, PCB design, Firmware, C/C++, Micro Python, App (IOS/Android), Java, Flutter, React Native development. My Services are: 1. Android and IOS Development 2. Schematic Design 3. PCB Design 4. BOM (Bill of Materials) preparation 5. PCB GERBER (fabrication files) 6. PCB fabrication 7. PCB Assembly 8. 3D modeling 9. 3D printing I have worked on MCUs(Microcontrollers) are gievn below: 1. STM32, STM8 2. PIC32, PIC18F, PIC16F, PIC12F 3. NRF52832, NRF52840 4. Arduino, Nano, Pro-Mini 6. Raspberry Pi Pico 7. ESP32, ESP8266 8. ATmega Tiny I have much experienc on following CAD tool for Schematic and PCB design: 1. Altium 2. KiCad 3. Eagle 4. Easy EDA 5. Autodesk Inventor 6. FreeCAD Below are some of the project on which i have worked: Projects Designed IOT Android based lock Key Hearing aid based Earphone Several watt Led drivers. Dimmers for Led lights. Road Blinkers and Studs. Automatic Stabilizers. Solar charge controller (MNRE specified). Automatic power saving solar street light with backup indication (Dusk to Dawn, MNRE specified). PWM and MPPT based solar charge controller with Fan speed control (MNRE specified). Automatic Home water pump and Submersible Pump controller. 2.1 Home Theater Audio System. 收起
  • 雇用 preetpalsingh33
  • 雇用     VTElectronics
雇用     VTElectronics

    VTElectronics VTElectronics

    Zimbabwe $25 美元/小时
    Complete Computer Systems Engineer
    Zimbabwe
    0.3
    1条评论 1条评论 $25 美元/小时
    Over 6 years experience designing PCBs and embedded systems. I offer the following services: * Digital and Analog circuit design * PCB design using either KICAD, Altium, Eagle, EasyEDA, Allegro etc. * Embedded programming for 8 to 32 bit MCUs/MPUs from Microchip, ST Micro- electronics, Espressif etc. *...
    Over 6 years experience designing PCBs and embedded systems. I offer the following services: * Digital and Analog circuit design * PCB design using either KICAD, Altium, Eagle, EasyEDA, Allegro etc. * Embedded programming for 8 to 32 bit MCUs/MPUs from Microchip, ST Micro- electronics, Espressif etc. * Instrumentation Engineering providing ** PLC programming of ABB, Siemens, Omron or Direct Logic PLCs ** SCADA development on Indusoft Web studio, Pulse or RS View 32 Works. ** Electrical wiring diagrams on Autocad Electrical. ** CAD drawings on Autocad or Solid works. * Professional 3D CAD design for electrical enclosures and complex PCBs. * Back end and front-end web development mainly for IoT applications. * Desktop application development mainly for interacting with embedded hardware. * Game Development (3D Modelling, animation and scripting) for Unity and JME3. 收起
  • 雇用 VTElectronics
  • 雇用     AbdhullahMR
雇用     AbdhullahMR

    AbdhullahMR AbdhullahMR

    Sri Lanka $12 美元/小时
    Arduino | PCB | Top 1% in Electrical Engineering
    Sri Lanka
    0.2
    1条评论 1条评论 $12 美元/小时
    ✴✴✴✴✴✴✴✴THANKS FOR VISITING MY PROFILE✴✴✴✴✴✴✴ I am a highly experienced Electrical and Electronics Engineer with extensive expertise in both Electrical Engineering and Software Engineering. As a Master's degree holder in Electrical and Electronics Engineering, I have a strong foundation in circuit design, PCB layouts,...
    ✴✴✴✴✴✴✴✴THANKS FOR VISITING MY PROFILE✴✴✴✴✴✴✴ I am a highly experienced Electrical and Electronics Engineer with extensive expertise in both Electrical Engineering and Software Engineering. As a Master's degree holder in Electrical and Electronics Engineering, I have a strong foundation in circuit design, PCB layouts, and lighting design for buildings, including designing lightning protection systems. Additionally, I have experience with Raspberry Pi and Arduino, LabVIEW, Multisim, PIC, AVR, ARM, VHDL, Verilog, and MATLAB. I possess a broad range of skills in various areas of app development, web development, AI and machine learning development. In app development, I have experience with both iOS and Android platforms, and I am proficient in React Native, Flutter, and Swift. I am also experienced in web development with expertise in WordPress, Shopify, Magento, and Laravel. Furthermore, I have worked extensively with various programming languages such as Java, C++, Python, and PHP. I am also proficient in JavaScript, Node.js, and Angular, and have experience with databases such as MySQL, PostgreSQL, and MongoDB. With over 500 completed projects under my belt, I can confidently say that I am capable of handling any project thrown my way with excellence. So I hope I can do the best with my full potential for the tasks which would be offered me. Give me your works and feel relaxed. Client's satisfaction is my success. GOOD LUCK!!! ZEESHAN 收起
  • 雇用 AbdhullahMR
  • 雇用     Engrusman877
雇用     Engrusman877

    Engrusman877 Engrusman877

    Pakistan $30 美元/小时
    Pro Engineer | Programming Expert | Writer
    Pakistan
    2.5
    2条评论 2条评论 $30 美元/小时
    Hello, I’m Muhammad, an Electronics and Embedded Systems Expert who, along with a team of 6 other professionals, is well-versed in all the top machine and electronic techniques, systems, and products. Over the past 5 years, I’ve developed skills that lend themselves to many different areas of Electronics and...
    Hello, I’m Muhammad, an Electronics and Embedded Systems Expert who, along with a team of 6 other professionals, is well-versed in all the top machine and electronic techniques, systems, and products. Over the past 5 years, I’ve developed skills that lend themselves to many different areas of Electronics and Systems, cryptography, network security and Mathematics/Statistics, including (but not limited to): 1. Electrical and Electronics 2. Embedded system 3. Power Electronics 4. Opto-Electronics 5. Electrical Machine 6. Industrial 7. Microcontroller and Microprocessor 8. DLD and VLSI 9. Robotics 10. Microwave, EMT, and Antenna 11. Arduino 12. Raspberry Pi 13. ESP series (ESP32 and ESP8266) 14. Microcontrollers (8051, PIC, AVR, ARM, and Atmega) I’m also fluent in a number of programming languages, such as: 1. C# 2. C/C++ 3. Python 4. JAVA 5. Assembly Language Overall, my team and I look to offer services that we can complete successfully, on time, or better, and within your budgetary expectations. We never agree to anything we can’t handle, and we’ll always abide by agreed-upon deadlines and project specs. It’s your project, we’re just carrying it out. We have experience in Machine Learning, Cryptography, PCB Design Software, and Circuit Schematic Design (among many others), so if you have any project in the realm of the things listed above, don’t hesitate to let us know! My team and I are happy to discuss any project you may be sitting on and will ensure successful completion above your expectations. Thanks for stopping by, and I hope to hear from you soon! 收起
  • 雇用 Engrusman877
  • 雇用     TekGeek9
雇用     TekGeek9

    TekGeek9 TekGeek9

    Sri Lanka $5 美元/小时
    IoT & Firmware Developer | PCB & Circuit Designer
    Sri Lanka
    0.0
    0条评论 0条评论 $5 美元/小时
    I am an expert Embedded system programmer such as PIC, AVR, Arduino Microcontrollers and designing PCB layouts, graduated in Electrical and Electronic Engineering at university of Sunderland in UK. My vision on freelancer is to give the best service to my clients in short period of time with great care. Even though...
    I am an expert Embedded system programmer such as PIC, AVR, Arduino Microcontrollers and designing PCB layouts, graduated in Electrical and Electronic Engineering at university of Sunderland in UK. My vision on freelancer is to give the best service to my clients in short period of time with great care. Even though delivery had done, I am available to support any kind of issues regarding on the delivery. therefore I am fully guaranteed, what I have done with my service. For mode details feel free to contact me! Thank you. 收起
  • 雇用 TekGeek9
  • 雇用     TheElitePro
雇用     TheElitePro

    TheElitePro TheElitePro

    India $20 美元/小时
    Ex VP Engg, Firmware, AI/ML, IoT, Linux, 20+ years
    India
    0.0
    0条评论 0条评论 $20 美元/小时
    Skills 1. 20 years of experience in the design and development of cutting-edge IoT products, including AI/ML solutions. 2. Handling end to end product development, from concept to production. Worked on Turnkey Solutions. 3. Architecture design, requirement capturing, competition analysis, testing & product validation...
    Skills 1. 20 years of experience in the design and development of cutting-edge IoT products, including AI/ML solutions. 2. Handling end to end product development, from concept to production. Worked on Turnkey Solutions. 3. Architecture design, requirement capturing, competition analysis, testing & product validation including regulatory compliance for US and EU. 4. Expertise in designing and deploying Industry 4.0, Video surveillance, Energy Meter, EV Charger, Water Filtration Systems and Internet of Things (IoT) based solutions. 5. IoT Protocols - MQTT, Wi-Fi, BLE, LPWAN, Zigbee, NBIoT, LoRA, CAN bus etc Embedded Protocols - I2C, SPI, QSPI, USB, ADC, DAC etc. 6. Firmware, RTOS and Linux based Application Development 7. Python and C Programming. 8. Kafka, Kubernetics and cloud based solutions. 9. Video Analytics using Yolo. 10. Sensors - MEMS, Battery, Accelerometer, Gyro, GPS, Temperature, Humidity, Photocell, Touch using capacitive sensing, PIR etc. Some large and critical projects I have done 1. Video Surveillance System - TI Processor based Linux board connected with 8 cameras to capture and store video and send it over 4G network. Board bring up and Linux application development. 2. Predictive Maintenance System for Industry 4.0 - BLE and WiFi based vibration sensor to send data to cloud over MQTT connection. 3. IP camera design - TI Processor based Linux board for IP camera development and mechanical integration with hardware. 4. IoT based Street Light - Zhaga based NBIoT Street Light Controller. 5. Patented RO Controller – Controller which detects genuine cartridge using RFID. 收起
  • 雇用 TheElitePro

你好,这是一些不在线的威客

你好,这是一些符合“”的不在线的威客