Heating Systems Experts等待雇用

  • 供热系统
建议:
更多

国家

精确位置

测验

时薪 (美元)

级别

在线

展示 107 结果
  • 雇用     mohamedattia2030
雇用     mohamedattia2030

    mohamedattia2030 mohamedattia2030

    Egypt $15 美元/小时
    MEP(HVAC,PL,Fire,EL) BIM&Mech Engineer ✓ᵛᵉʳᶦᶠᶦᵉᵈ
    Egypt
    1.8
    1条评论 1条评论 $15 美元/小时
    I'm Mohamed Attia from Cairo , Egypt , I'm Mechanical Engineer Specialisized in Design (HVAC,PLUMBING,FIREFIGHTING) Systems with all available software (AUTOCAD , REVIT) And All Calculations -- MY Skills 1- HVAC design and software (Preparation & review of design, construction/execution and shop drawings, Design...
    I'm Mohamed Attia from Cairo , Egypt , I'm Mechanical Engineer Specialisized in Design (HVAC,PLUMBING,FIREFIGHTING) Systems with all available software (AUTOCAD , REVIT) And All Calculations -- MY Skills 1- HVAC design and software (Preparation & review of design, construction/execution and shop drawings, Design reports, Project Specifications and any other necessary documents pertaining to the design and construction of HVAC (Heating Ventilating and Air Conditioning) System,Create layout for equipment, ducting and piping of Heating, Ventilating and Air Conditioning (HVAC) System including sizing of pipes and ducts) - I use all international codes such as ( Ashrae , NFPA, UPC, IPC, UPC ,ASPE, SMACNA other International design codes) 2- Plumbing & Fire Fighting ( Designing, Shop Drawing, As Built drawing and Supervision services related to Plumbing, Firefighting systems ) 3- Duct and All HVAC , MEP Take off and Estimating 4- Simulation (Ventilation Using Ventsim Software , Hydraulic and Pneumatic Using FluidSim Software,Matlab Software) 5- MATLAB Software 6- Circuit Analysis 7-digital logic design 8- Convert PDF , JPG,Sketch to dwg or Rvt (AUTOCAD , REVIT) 9- Technical Reports (Cooling and Heating Loads reports , Ventilation Reports , External static pressure ,heat transfer , fluid mechanics , thermodynamics) 10- tutorial (HVAC , FIREFIGHTING , PLUMBING , DESIGN DRAWING , SHOP DRAWING , AUTOCAD , MEP , ARCH , REVIT , PHYSICS ,THERMODYNAMICS , HEAT TRANSFER , FLUID MECHANICS , MATHS,Dynamics,Hydraulics and Pneumatics,Calculus I- II,Differential Equations) ---- My Software Skills 1- Autodesk AutoCAD 2- Autodesk AutoCAD MEP ,ARCH 3- Autodesk Revit 4- Mechanical Ventilation Simulator (VentSim) 5- Matlab Software 6-Hap program 7- Ductsizer 8- Elite programs 9-Pump Selection Software ( Dp selector , and Grundfos , KSP online selection) 10- Pump Sizing and pump Calculator 11- Autofluid 12- pipesizer 13- Microsoft office Software 14- Bluebeam ★★★★★Expertise ★★★★★Quality of Work ★★★★★Professionalism ★★★★★Communication Skills Now, I am waiting your messages. 收起
  • 雇用 mohamedattia2030
  • 雇用     cesargb01
雇用     cesargb01

    cesargb01 cesargb01

    Bolivia $20 美元/小时
    Electromechanical Engineering
    Bolivia
    1.4
    1条评论 1条评论 $20 美元/小时
    Electromechanical Engineer | Design & Project Management | BIM/MEP Modeler Electromechanical engineer with experience in design, project management, and BIM/MEP modeling. Specialized in Autodesk software (Inventor, AutoCAD, Revit). Key skills: Electromechanical design: HVAC, Electrical systems, Plumbing...
    Electromechanical Engineer | Design & Project Management | BIM/MEP Modeler Electromechanical engineer with experience in design, project management, and BIM/MEP modeling. Specialized in Autodesk software (Inventor, AutoCAD, Revit). Key skills: Electromechanical design: HVAC, Electrical systems, Plumbing (MEP). Project management: Efficiency in organization through technology. BIM/MEP modeling: Use of Autodesk Revit for collaboration and precise visualization. Technical drawing: Production of clear and precise drawings. Technological adoption: Interest in staying up-to-date with the latest technologies. Interested in my skills? Let's discuss how I can contribute to your team or project! 收起
  • 雇用 cesargb01
  • 雇用     kashifsani
雇用     kashifsani

    kashifsani kashifsani

    Pakistan $20 美元/小时
    HVAC-PLUMBING-ELECTRICAL-ARCHITECT-3D
    Pakistan
    0.8
    1条评论 1条评论 $20 美元/小时
    بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ >>>>>>>>>>>>>>>>>>>>> Services offered <<<<<<<<<<<<<<<<<<<<<<<< 1. Architectural plans/House plans/Elevation/Sections/Villas 2. HVAC Plans/Cooling Load/Heat Load/Detailed Design Drawings 3. Plumbing System/Hot & Cold-Water Supply...
    بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ >>>>>>>>>>>>>>>>>>>>> Services offered <<<<<<<<<<<<<<<<<<<<<<<< 1. Architectural plans/House plans/Elevation/Sections/Villas 2. HVAC Plans/Cooling Load/Heat Load/Detailed Design Drawings 3. Plumbing System/Hot & Cold-Water Supply Systems/ Plumbing calculations/Water Supply Riser Diagrams. 4. Drainage Systems/ Sewerage Systems/ Septic Tank Design/Drainage Riser Diagrams 5. Fire Protection/Fire Fighting/ Fire Alarm/Automatic Sprinkler System/ Fire Hose Reel System/Foam System/Clean agent System/Hydraulic Calculations as per NFPA standards. 6. MEP Estimation /Take off quantities sheets/Bills of Quantity (BOQ) using Plan swift and Bluebeam 7. Concrete, Masonry, Flooring, Finishing, Painting works estimation using Plan Swift. 8. Preparation of tender drawing, shop drawing, and As-built drawings in AutoCAD. 9. Technical submittals and specification preparation. 10. HVAC Equipment like Air devices selection, VCD, VAV, CAV, AHU, FCU, ESP calculation for ducts and pump head calculation. 11. Chiller Selection/ Chiller plant Layouts 12. Product Designing/Mechanical Design 13. Piping, electrical, mechanical 3D modelling. 14. Electrical Design/Lighting/Power/Single Line Diagrams/Equipment Schedule. 15. Business Presentation, Education Presentation, PowerPoint Presentation (2D, 3D animated Presentation etc. 16. Revit Conversion of 2D pdf/dwg file to 3D. 17. Photoshop (editing, background removal, logo, Flyer, Brochure, Banner/Billboard etc.) / Illustrator >>>>>>>>>>>>>>>>>>>>> Why hire us? <<<<<<<<<<<<<<<<<<< >>Full Time Freelancer<< >>15+ years of experience<< -Professional Team of Architects and Engineers - Will provide highest quality work with lowest cost >>>>>>>>>>> Software expert <<<<<<<<<<< 1. AutoCAD 2. Autodesk Revit 3. Plan Swift & Blue Beam 4. MS Office, Excel, PowerPoint 5. McQuay Duct Sizer/McQuay Pipe Sizer 7. HAP (HVAC Load Calculation) 8. Adobe Photoshop & Illustrator. 9. Solidworks 收起
  • 雇用 kashifsani
  • 雇用     mhendy1
雇用     mhendy1

    mhendy1 mhendy1

    Egypt $6 美元/小时
    Mechanical engineer
    Egypt
    3.0
    1条评论 1条评论 $6 美元/小时
    I am a mechanical engineer with high experience using engineering programs such as Solidworks, Matlab, Ansys , Abaqus and python. Besides, I am skilled in technical writing and essay writing.
    I am a mechanical engineer with high experience using engineering programs such as Solidworks, Matlab, Ansys , Abaqus and python. Besides, I am skilled in technical writing and essay writing. 收起
  • 雇用 mhendy1
  • 雇用     DFL2208
雇用     DFL2208

    DFL2208 DFL2208

    Spain $24 美元/小时
    Ingeniero de instalaciones
    Spain
    0.0
    0条评论 0条评论 $24 美元/小时
    Ingeniero de instalaciones con más de 20 años de experiencia en el sector. Amplios conocimientos en el diseño, construcción y mantenimiento de instalaciones de climatización, ventilación, electricidad, fontanería, protección contra incendios, telecomunicaciones, etc. Lenguas maternas: Español y catalán Otras...
    Ingeniero de instalaciones con más de 20 años de experiencia en el sector. Amplios conocimientos en el diseño, construcción y mantenimiento de instalaciones de climatización, ventilación, electricidad, fontanería, protección contra incendios, telecomunicaciones, etc. Lenguas maternas: Español y catalán Otras lenguas: - Inglés hablado y escrito nivel medio-alto - Italiano hablo y escrito nivel medio-bajo 收起
  • 雇用 DFL2208
  • 雇用     IvanMontesM
雇用     IvanMontesM

    IvanMontesM IvanMontesM

    Mexico $15 美元/小时
    Proyectista HVAC, ing en control y automatización
    Mexico
    0.0
    0条评论 0条评论 $15 美元/小时
    Cuento con experiencia de dos años en el ramo de sistemas HVAC, especialmente en elaboración de balances térmicos mediante el software chvac elite, elaboración de planos en autoCAD, selección de equipos de aire acondicionado y elaboración de catálogo de conceptos. Así como en la elaboración de presupuestos. Tengo...
    Cuento con experiencia de dos años en el ramo de sistemas HVAC, especialmente en elaboración de balances térmicos mediante el software chvac elite, elaboración de planos en autoCAD, selección de equipos de aire acondicionado y elaboración de catálogo de conceptos. Así como en la elaboración de presupuestos. Tengo experiencia en el manejo de variadores de frecuencia en un nivel intermedio, cuento con experiencia de 1 año en manejo de PLCs siemens s7-1200 y Delta controls. Además experiencia en el electromagnético de motores eléctricos trifásicos. 收起
  • 雇用 IvanMontesM
  • 雇用     urfi120
雇用     urfi120

    urfi120 urfi120

    Pakistan $20 美元/小时
    Electrical Desing, Cost Estimation, Take-Off
    Pakistan
    0.0
    0条评论 0条评论 $20 美元/小时
    Expert cost estimation engineer with over 15 years of experience in HVAC, Plumbing, Electrical. - Design - 3D Modeling, REVIT, CAD, BIM - Material take-off, cost estimation of HVAC, Plumbing & Electrical works. - Civil construction estimates - Mechanical piping & pipelines estimates. - Building projects estimates. -...
    Expert cost estimation engineer with over 15 years of experience in HVAC, Plumbing, Electrical. - Design - 3D Modeling, REVIT, CAD, BIM - Material take-off, cost estimation of HVAC, Plumbing & Electrical works. - Civil construction estimates - Mechanical piping & pipelines estimates. - Building projects estimates. - Planswift, RSMeans, CAD 收起
  • 雇用 urfi120
  • 雇用     chinwenwa2016
雇用     chinwenwa2016

    chinwenwa2016 chinwenwa2016

    Nigeria $15 美元/小时
    A Virtual Assistance representative.
    Nigeria
    0.0
    0条评论 0条评论 $15 美元/小时
    I'm a Customer Service Representative and an expert on virtual assistance. My work experience and professionalism made me the best in this field. I am a multitalented freelancer and ready to grow your business with my speedy actions. My educational knowledge and working experiences will be a great asset for you....
    I'm a Customer Service Representative and an expert on virtual assistance. My work experience and professionalism made me the best in this field. I am a multitalented freelancer and ready to grow your business with my speedy actions. My educational knowledge and working experiences will be a great asset for you. Thanks. 收起
  • 雇用 chinwenwa2016
  • 雇用     semirdrina
雇用     semirdrina

    semirdrina semirdrina

    Bosnia and Herzegovina $8 美元/小时
    Autocad expert, CATIA expert
    Bosnia and Herzegovina
    0.0
    0条评论 0条评论 $8 美元/小时
    I'm a mechanical enginering student working for low money, jobs that dont last long about 30 hours per week. I know how to work with fluids, heat exchangers, heat transvers for buildings, heat losses. Im also working with CATIA, SolidWorks (Certificated) and Autocad
    I'm a mechanical enginering student working for low money, jobs that dont last long about 30 hours per week. I know how to work with fluids, heat exchangers, heat transvers for buildings, heat losses. Im also working with CATIA, SolidWorks (Certificated) and Autocad 收起
  • 雇用 semirdrina
  • 雇用     ilyes90
雇用     ilyes90

    ilyes90 ilyes90

    Tunisia $10 美元/小时
    Mechahical design Engineer
    Tunisia
    0.0
    0条评论 0条评论 $10 美元/小时
    I'm a mechanical engineer working with Deutsch car constructors (VW, BMW, AUDI...) on the prototyping of its new car models and designing the checking fixture and controlling tools using CATIA V5.
    I'm a mechanical engineer working with Deutsch car constructors (VW, BMW, AUDI...) on the prototyping of its new car models and designing the checking fixture and controlling tools using CATIA V5. 收起
  • 雇用 ilyes90

你好,这是一些不在线的威客

你好,这是一些符合“”的不在线的威客