可雇用PCB Layout Designers

  • 印制板布局
建议:
更多

国家

精确位置

测验

时薪 (美元)

级别

在线

Showing 76 results
  • 雇用Euroaccount

    Euroaccount

    Russian Federation $40 USD / hour
    Mechanical Engineer, Electrical Engineer
    Russian Federation
    7.0
    8条评论 $40 美元/小时
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using Altium designer, Eagle CAD, Allegro, CADSTAR, PADS, Protel99.. - Product design and mechanical design in Solidworks. 收起
  • 雇用MrDmytro

    MrDmytro

    Ukraine $28 USD / hour
    PCB developer & microcontroller firmware developer
    Ukraine
    4.6
    10条评论 $28 美元/小时
    Electronic engineer, software engineer, system engineer. I develop custom electronics of any level of complexity. I have a well-equipped laboratory - prototyping is possible. I program for such microcontrollers: - ATmega (Arduino also) - STM32 - PIC For the development of printed circuit boards, I use Altium...
    Electronic engineer, software engineer, system engineer. I develop custom electronics of any level of complexity. I have a well-equipped laboratory - prototyping is possible. I program for such microcontrollers: - ATmega (Arduino also) - STM32 - PIC For the development of printed circuit boards, I use Altium Designer or (at the request of the customer) Eagle. Extensive experience in the development of embedded systems, automation systems, switching power supplies and inverters. 收起
  • 雇用levstremetskyi80

    levstremetskyi80

    China $35 USD / hour
    PCB/Firmware/Product3D/Manufacturing
    China
    6.9
    33条评论 $35 美元/小时
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional...
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. 收起
  • 雇用DreamCha

    DreamCha

    China $38 USD / hour
    Senior Electrical & Embedded System Engineer
    China
    6.1
    11条评论 $38 美元/小时
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With...
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With 15 years industry experience, my expertise are as follows: - Circuit & Schematic & PCB design - Prototype & Mass production - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, nRF51/nRF52xxx, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485, Lora, NFC/RFID - Raspberry Pi using node.js, QT, etc. - various PLC & HMI programming such as Nextion, ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Mobile app development - C/C++, C#,VB, Embedded C/C++ I will do my best to complete your proaject quickly, and I will provide the best service of high quality. Thank you. 收起
  • 雇用chuledeco

    chuledeco

    Argentina $20 USD / hour
    Electronic Engineer. Hardware, Signals and Physics
    Argentina
    5.5
    17条评论 $20 美元/小时
    I'm a proactive Electronic Engineer who bring customers a complete solution from the idea to the final product. Although I am in the electronic design market from ten years I'm also a researcher who achieve his Ph.D. working in interferometric optic sensors and works as teacher professor at the Engineering...
    I'm a proactive Electronic Engineer who bring customers a complete solution from the idea to the final product. Although I am in the electronic design market from ten years I'm also a researcher who achieve his Ph.D. working in interferometric optic sensors and works as teacher professor at the Engineering Faculty. As part of a team with other engineers and industrial designers, I can guide customers through the design process up to the manufacturing end. My experience leading with PCB manufacturers, component suppliers and PCBA services will help you to get very soft working experience. Always providing high-quality results. Analog/Digital electronics design PCB layout (IPC related) Firmware development for PIC and Atmel microcontrollers (CCS, Mplab X, Atmel Studio) Medium and high-level programming: Python, C, ASM, Matlab Signal conditioning and processing, analog and digital filtering Large experience in thermal control Fuzzy logic & machine learning 收起
  • 雇用BKTechnology

    BKTechnology

    Vietnam $25 USD / hour
    Hardware|Firmware|App|Mechanical|Prototypes
    Vietnam
    6.6
    23条评论 $25 美元/小时
    ***** GIVE ME 50% YOUR TRUSTING , I WILL GIVE BACK 100 % SATISFACTION ***** We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical (Enclosure, Case, Box...). Our...
    ***** GIVE ME 50% YOUR TRUSTING , I WILL GIVE BACK 100 % SATISFACTION ***** We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical (Enclosure, Case, Box...). Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, EMCC, DDRx, PCIEx, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TESTING services. We can make any prototypes, even support mass production. We provide Service & Support even after completion of the projects. "We are ready to give you the best" Kind regards! BK Tech 收起
  • 雇用mechatronicsengr

    mechatronicsengr

    Pakistan $25 USD / hour
    Embedded Systems Design and Development Engineer
    Pakistan
    5.7
    10条评论 $25 美元/小时
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training 收起
  • 雇用xiaoqideng

    xiaoqideng

    China $40 USD / hour
    Embedded System & IoT Designer & Linux & Developer
    China
    5.2
    3条评论 $40 美元/小时
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing...
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing using Altium Design Tool and Simulation Tools 2) Firmware Development - Rich experiences in C/C++/Embedded C - I like using various of MPU, ARM, PLD and embedded system equipment STM32 family, NRF51822/52832/nRF52840, CC2540/CC2541/CC26xx, ESP8266/ESP32, Silicon chips such as BGM113, PIC16F/18F/33F, Atmega family, 8051 family, Arduino, Atmel, - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Simplicity, CCS, Segger, - Rich experience in variant peripherals: UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. I can adjust and work no matter what my client's timezone is. Thank you for your time! 收起
  • 雇用jokanies

    jokanies

    Belgium $50 USD / hour
    Embedded System | Multimedia Expert
    Belgium
    4.9
    1条评论 $50 美元/小时
    Hello! I have rich experiences in IoT/Bluetooth/Multimedia devices and iOS/Android/Windows/ Linux/MacOS app development, especially in the field of Wireless and Multimedia communication. My specialties are: • IoT prototyping • BLE/WiFi/LoRa/GPS communication • Firmware development/PCB Design • Embedded Linux •...
    Hello! I have rich experiences in IoT/Bluetooth/Multimedia devices and iOS/Android/Windows/ Linux/MacOS app development, especially in the field of Wireless and Multimedia communication. My specialties are: • IoT prototyping • BLE/WiFi/LoRa/GPS communication • Firmware development/PCB Design • Embedded Linux • Video/Audio encoding/streaming/transcoding My experiences are: • Bluetooth: nRF51822, nRF52832, nRF52840, DA14580, DA14583, DA14585, CC2541, CC2640, BLE112, BGM113, CSR8670 • Wi-Fi: ESP8266, ESP32 • MCU: PIC, ATMel, STM32, Raspberry pi • Video/Audio Processor: Hi3516, Hi3518, Hi3519, VS1063, VS1005, ADSP, ADAU, SAM3816, SAM5704 • App: iOS/Android Bluetooth App, Video Encoding/Transcoding/Streaming • Video Codec: H.264/AVC, H.265/HEVC, VP8/VP9, MPEG2/MPEG4, VC1/WMV3 • Audio Codec: MPEG Audio, MP3, AAC, AC3, DTS, OGG • Protocol: RTP, RTSP, RTMP, MMS, MPEG DASH, HLS, SIP, SDP • Open Source: FFmpeg, VLC, x264, x265, Live555, OpenCV 收起
  • 雇用ExpertSoul

    ExpertSoul

    Pakistan $15 USD / hour
    Engineers Core | Academic Writer | Ful Stack Deve
    Pakistan
    2.2
    1条评论 $15 美元/小时
    (بِسْمِ اللَّهِ الرَّحْمَنِ الرَّحِيم (ماشاء اللہ Thank you for considering my profile Starting from 2016 I have provided my services to various entities in different capacities, it is now the sixth year being engaged with the Development. I have always focussed on the quality services inclining trend manifold. ★...
    (بِسْمِ اللَّهِ الرَّحْمَنِ الرَّحِيم (ماشاء اللہ Thank you for considering my profile Starting from 2016 I have provided my services to various entities in different capacities, it is now the sixth year being engaged with the Development. I have always focussed on the quality services inclining trend manifold. ★ My core specialties are; -Android & iOS Development - Data Structure and Algorithm -Java, C, C++ - python, Matlab, C#, VB.Net, OpenGL - web scraping, Web Search - PHP, JavaScript/Jquery, CSS, HTML - Django, Laravel, CodeIgniter, ReactJS - NodeJS, Angular, Vue.JS, FantomJS, D3.js, Three.js - Flash Animator and ActionScript 2.0, 3.0 - AI, ML with Python, C++ - C#, VB Windows Service - AI Game Developing ★ I am providing occasional services in; Academic Writing and Proof-Reading Report / Essay / Research Letters / Resumes / Professional Proposals Writing APA, Harvard, MLA Reference Styles Business Plans Writing Creative Writing 收起

你好,这是一些不在线的威客

你好,这是一些符合“”的不在线的威客