Camera head arduino工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    17,564 camera head arduino 搜到的工作,价格货币为 USD
    基于Scratch二次开发 已经结束 left

    任务: 1、集成Arduino,实现正常的初始化、连接Arduino硬件,并且支持向Arduino上传代码; 2、UI调整; 以上第1步已经完成集成Arduino部分,初始化、连接存在BUG,需修复,上传代码功能待实现。

    $456 (Avg Bid)
    $456 平均报价
    2 个竞标
    编写软件 已经结束 left

    认识ARDUINO,马达运作,电路,驳线等 我想要一套xy轴的运作系统

    $190 (Avg Bid)
    $190 平均报价
    3 个竞标

    我有进行中的、与之前的项目相关的工作parsing jsonarray using Arduino mega with esp8266-12 '

    $50 / hr (Avg Bid)
    $50 / hr 平均报价
    1 个竞标
    Arduino 仿真 已经结束 left

    主要是想仿真一个激光测距的,暂时可以不考虑激光传感器,只需要模拟出计算时间差然后乘以光速,最后显示在LCD显示器上。自己已经做了一部分,proteus图已经画好,程序但是有点问题,求帮忙,有偿。

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标
    WiFi BLE Camera 已经结束 left

    现有APP具有通过WiFi 录影保存到手机上的功能。我司想再做一个APP在后台运行,这个APP的功能详细参考附件说明。

    $555 (Avg Bid)
    $555 平均报价
    2 个竞标

    需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者

    $250 - $750
    $250 - $750
    0 个竞标

    I'm looking for someone who can do this project, as well as contribute ideas. I would like to make a kind of infrared gate, which when an object passes, beeps. The maxim...ideas. I would like to make a kind of infrared gate, which when an object passes, beeps. The maximum distance to detect the object would be one metre. It could be done in arduino.

    $32 (Avg Bid)
    $32 平均报价
    8 个竞标

    CODE, only codeing needed I got a arduino nano and a digital adressable led strip (ws2812) or simular. I know how to wire them but i do not got time to make a code, so i am looking for a code that does the following: Have a button for «automatic» and « manual» mode(and a smal led to indicate) Automatic mode should make the led dance with a few patterns

    $54 (Avg Bid)
    $54 平均报价
    7 个竞标
    Arduino project 6 天 left
    已验证

    ...and a paper describing the task and all relevant requirements. Expected deliverables: • a working sketch according to all stated requirements in order to be tested on an Arduino Uno kit. • a bootloader according to all stated requirements in order to be programmed and tested on a prototype. • a working sketch according to all stated requirements in

    $19 (Avg Bid)
    $19 平均报价
    7 个竞标

    i'm preparing a arduino based low cost chicken feeding system, i need to write a 10000+ words report.

    $50 (Avg Bid)
    $50 平均报价
    6 个竞标
    Arduino sketch 6 天 left

    I need a sketch for arduino with a following logic: Two rows of physical buttons, top and bottom. Buttons in the top row we name: 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8 Button in the bottop row we name: 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8 For each button we have a led light, we name them 1.1 - 1.8, 2.1 - 2.8 for each button in the top and bottom

    $45 (Avg Bid)
    $45 平均报价
    5 个竞标

    The target of this assignment is to develop a 3 pieces of embedded IoT device based on common flexible programmable platforms such as Arduino, Raspberry Pi, ESP32 or equivalent with WiFi and Bluetooth integrated circuits. The Embedded Device (ED) is aimed to drive the interaction between a portable NFC and a commercial product by mean a Bluetooth (BT)

    $21 / hr (Avg Bid)
    $21 / hr 平均报价
    19 个竞标
    Head 3d cartoon 6 天 left
    已验证

    Hi, I want to make something similar to the links below : - [登录来查看链接] - [登录来查看链接]@[登录来查看链接] More details will be in the chat. Thanks

    $8 / hr (Avg Bid)
    $8 / hr 平均报价
    12 个竞标

    need arduino tested pcb furmwarevfiles for countdown lock timer

    $13 (Avg Bid)
    $13 平均报价
    1 个竞标

    arduino circuit for timer box

    $13 (Avg Bid)
    $13 平均报价
    1 个竞标

    I am looking for someone to do me a cartoon logo design of three children's head with words under it. Please only bid if you have experience with making logos and making drawing cartoons. I will need to see work in order to accept any bids. I will also try to reach out to everyone. So once again please only bid if you have proof of cartoon logos with

    $34 (Avg Bid)
    $34 平均报价
    25 个竞标

    ...messaging platforms like Pub/Sub on cloud services like Azure, Google, Amazon etc. - Hands-on experience working with embedded platforms/Operating Systems using devices like Arduino, Raspberry Pi, or any ARM based controllers. - should have worked on ESP series, Atmel series. - Experience with one or more commercial wireless protocols like BLE, Wi-Fi

    $629 (Avg Bid)
    $629 平均报价
    7 个竞标

    I am Said from Oman/Muscat I have hydroponic arduino project need to by Modify The project is ready and free, but needs to modify 3 or 4 things to suit my use Who is interested please contact me on email [Removed by Freelancer.com Admin]

    $161 (Avg Bid)
    $161 平均报价
    14 个竞标

    ...iOS/Android application (estimate objects with smartphone's camera) Hi all! We already have working application for avia company (in iOS/Android). Middleware is made on Python, Android version - on java+kotlin, iOS - on objective-C There is one important feature for us that we want implement - "camera ruler". The idea: - we have restrictions for carry-on

    $1146 (Avg Bid)
    $1146 平均报价
    23 个竞标

    I want to create a pcb that will act as cover for the following din rail box: [登录来查看链接] The pcb dimmensions(155.4 x 42) and m...keyboard will have 16 keys that will have 8 pins which i was thinking to link to a CD4021BM96 through 10k resistors in order to use less pins when connecting the PCB to my Arduino controller. thanks

    $636 (Avg Bid)
    $636 平均报价
    10 个竞标

    Hi I need help with the esp-01 module for a project I need to send information via wifi to there blynk cloud. It's a sensor that connects to the wifi I'm using an arduino uno and mega The mega has a PIR sensor while the uno has a pressure sensor When each sensor is triggered, the esp-01 will send a message through the internet to the blynk app The

    $118 (Avg Bid)
    $118 平均报价
    3 个竞标
    Arduino C/C++ to C# 5 天 left
    已验证

    Hey all I am in need of converting some Arduino code/library to C#. Stats on the Arduino source files: "[登录来查看链接]" ~650 lines of code "AES.H" ~70 lines of code

    $129 (Avg Bid)
    $129 平均报价
    25 个竞标

    Hardware: Arduino Uno, DS18B20 temperature sensor, 16x2 LCD display shield and servo motor. Objective: PID control of the servo motor to open and close a valve to regulate the temperature inside a condenser. We are cooling a hot condenser with cool water. The temperature SetPoint must maintain a temperature difference of no more than one

    $67 (Avg Bid)
    $67 平均报价
    6 个竞标

    Hi, I have created a number of lighting display projects around my home that use Arduino Nano boards and various LEDs strings . I now want to create an app and a central Arduino hardware system that will connect to each of my existing projects via wi-fi, so that I can control each lighting system centrally. I have purchased some ESP8266 wifi boards

    $257 (Avg Bid)
    $257 平均报价
    28 个竞标

    ...могу выпустить схему. Устройство нужно продумать согласно части структурной схемы квеста и вполне детальному заданию, собрать и установить на объекте. Управляется устройство Arduino nano или mega. По результату работы я рассчитываю получить схему электрическую принципиальную устройства, исходник программы для ардуино с подробными комментариями (это необходимо

    $239 (Avg Bid)
    $239 平均报价
    4 个竞标

    Gas detector using arduino And to send the data using wifi module on arduino to Android

    $107 (Avg Bid)
    $107 平均报价
    29 个竞标

    I want to create a pcb that will act as cover for the following din rail box: [登录来查看链接] The pcb dimmensions(155.4 x 42) and mount ho...keyboard will have 16 keys that will have 8 pins which i was thinking to link to a CD4021BM96 through 10k resistors in order to use less pins when connecting the PCB to my Arduino controller.

    $180 (Avg Bid)
    $180 平均报价
    8 个竞标

    Hi I need a arduino coder and schematics designer for a project. place you bids i will provide details in chat. thanks

    $13 / hr (Avg Bid)
    $13 / hr 平均报价
    41 个竞标

    hello, im looking for someone who is familiar with PATDMA (Modified SOTDMA) protocol, and can help me design a prototype using arduino.

    $35 (Avg Bid)
    $35 平均报价
    1 个竞标

    I have to use two different sensor flow rate sensor and float sensor with Arduino [登录来查看链接] rate sensor measure the flow of the water and float sensor measure the water level is high or low. I’m using ESP8266 wifi module and I need to show sensor value in IOT platform and I have to get alert message on my phone. And also I need simulation of both sensor

    $116 (Avg Bid)
    $116 平均报价
    17 个竞标

    I have an Arduino Uno with SIM5320A 3G GNS Shield. I uploaded the attached program that accepts a sms text and returns a phone call to the sms sender. It works great as long as I have the Arduino serial monitor up but I want to cut the cord and have it run even when the USB cable is not attached.

    $121 (Avg Bid)
    $121 平均报价
    7 个竞标

    Hello, I'm making a quadcopter with arduino. I have an hc05 for bluetooth connection so i can control the drone with that. MPU6050 sensor 11.1V lipo Brushless motors & esc's So far i managed to do the wirings etc. (for the esc connection i need some help) Sensor worked , i tried it with multiwii. But I have no clue how to set the bluetooth up. ( tried

    $114 (Avg Bid)
    $114 平均报价
    15 个竞标

    Hello, I'm building a drone with arduino. Herefore i use a hc05 to control it with bluetooth on my android phone. I have a mpu6050 sensor. This one is working. The HC05 is also working i think. But i have a hard time configuring everything. Even when i try to light up a led with my phone its not working and i don't know why. Could you help with getting

    $9 (Avg Bid)
    $9 平均报价
    1 个竞标
    EAGLE BOARD 3 天 left

    I need a board design with bill of material to be used as a shield for Ardiuno Nano board. This is a simple shield, all parts already exist,...a shield for Ardiuno Nano board. This is a simple shield, all parts already exist, just need to have all put together onto 1 single shield so I just need to plug in the Arduino nano with no wire connection.

    $152 (Avg Bid)
    $152 平均报价
    10 个竞标

    I have to use two different sensor flow rate sensor and float sensor with Arduino [登录来查看链接] rate sensor measure the flow of the water and float sensor measure the water level is high or low. I’m using ESP8266 wifi module and I need to show sensor value in IOT platform and I have to get alert message on my phone. And also I need simulation of both sensor

    $109 (Avg Bid)
    $109 平均报价
    2 个竞标

    ...hard drive is plugged in. I would also like to see if it is possible to add a controllable relay to the power portion that would allow the ability to disconnect the power via Arduino or another microprocessor. The goal is to have banks of 15 setup and up to 105 PORTS setup where I can more control of the process and regulate power issues if there are any

    $22 / hr (Avg Bid)
    $22 / hr 平均报价
    16 个竞标

    need report writer, who can start now code is already completed 4000 words

    $81 (Avg Bid)
    $81 平均报价
    13 个竞标
    arduino report writer 3 天 left
    已验证

    need report writer for arduino proteus simulation is ready arduino code is ready need someone who can start now project is automatic switching of lights based on LDR and PIR

    $26 (Avg Bid)
    $26 平均报价
    16 个竞标

    ...about developing an Arduino based AC motor control. In a previous project I have tried to use the Arduino to generate a PWM signal, that is later on filtered and amplified to generate a proper sine wave, that can be altered by frequency and amplitude to control a motor. Unfortunately with the current code it turned out, that the Arduino is not able to generate

    $203 (Avg Bid)
    $203 平均报价
    20 个竞标

    I am looking for a designer to produce a bust 3d model (digital) of this person from his publicly available pictures: [登录来查看链接] [登录来查看链接] He has many videos and photos available in public.

    $169 (Avg Bid)
    $169 平均报价
    16 个竞标

    PHP based server software that runs to arduino to rasberry pis. This software lights LEDS that are programmed using the program. It is important to have an understanding of the hardware and software involved since this is a very customized project. We have no contact with the original designer. You MUST be able to do this on site locally in Los Angeles

    $55 / hr (Avg Bid)
    $55 / hr 平均报价
    18 个竞标

    i just want to know how to train just want to know how to train openmv-cam-m7 camera to detect humans . need help me performing demonstration that the camera actually detect [登录来查看链接] OpenMV Cam features: The STM32F765VI ARM Cortex M7 processor running at 216 MHz with 512KB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant

    $18 (Avg Bid)
    $18 平均报价
    1 个竞标

    We have an excellent team how work on new ideas and innovation and build new and unique stuff. We ar...excellent team how work on new ideas and innovation and build new and unique stuff. We are currently working on a self balancing project for which we require to program an Arduino in #C language as well as to do some basic electrical work. In Mumbai.

    $24 (Avg Bid)
    $24 平均报价
    10 个竞标
    Programming 2 天 left

    We have an excellent team how work on new ideas and innovation and build new and unique stuff. We are currently...excellent team how work on new ideas and innovation and build new and unique stuff. We are currently working on a self balancing project for which we require to program an Arduino in #C language as well as to do some basic electrical work.

    $15 (Avg Bid)
    $15 平均报价
    8 个竞标

    I have a Learning Centre for Engineers in Chennai. I need someone with good knowledge of Arduino Programming who can teach the same to a set of Engineering students for 2 days.

    $101 (Avg Bid)
    $101 平均报价
    18 个竞标

    I need the following drawings made for a Security Camera Prototype: 1. A few Technical Line Drawings Black and White ( Approx. 5 Drawings ) 2. Color Illustration Design Drawings ( Approx. 5 Drawings) I will supply the technical details, some pictures for references.

    $427 (Avg Bid)
    $427 平均报价
    48 个竞标

    Fit a Kogan wireless reversing camera to a Citroen C4

    $111 (Avg Bid)
    $111 平均报价
    1 个竞标

    We need cameraman / drone operater in Vijayawada for advt. Purpose Should know to operate 1dx camera, 5D and Phantom 4Plus Pro Contact : Sandeep (Removed by site admin)

    $18 (Avg Bid)
    本地
    $18 平均报价
    1 个竞标

    Please let me know if you can make video like this we want some mix and match video like these time 1.30 minute , we will provide voice over we need camera and 3d animation but hand image with ring will be provided by you. Box with all ring images we can give you HD image or you can add rings in box yourself. Box images I will provide over the

    $297 (Avg Bid)
    $297 平均报价
    28 个竞标

    Looking for a developer who knows Arduino and python very well. I'm in hurry so you must start right now. More details later on.

    $2 - $8 / hr
    加封
    $2 - $8 / hr
    9 个竞标