J2me application send file mobile bluetooth工作

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    7,199 j2me application send file mobile bluetooth 找到的工作,价格在 USD

    Gps测速 实时显示gps速度 放电保护电压(向单片机写入一组数据) 充电保护电压(向单片机写入一组数据) 温度保护(向单片机写入一组数据) 放电显示(从单片机读取电流参数并在安卓上面显示出来) 电流显示 (从单片机读取电流参数并在安卓上面显示出来) 温度显示 (从单片机读取电流参数并在安卓上面显示出来) 电压显示功能(显示电池每一节的电压 可以手动配置电池数量,从单片机读取电池,可以按照低压高低排序) 电压差功能 单节电池最高电压和最低电压的差别 修改蓝牙的配对密码 以及ssid 三个界面 一个是显示速度温度电流使用电量的界面 一个 是 配置各种参数的界面 还有一个是读取电池电压的界面

    $500 (Avg Bid)
    $500 平均报价
    1 竞标

    We need to create a android app that can connect w...to create a android app that can connect with arduino Bluetooth module and grab 4 sensor data by using separate buffers (pH, Turbidity, Conductivity, Temperature) and display them on the application interface. We can provide the whole arduino code, you need to build the android Bluetooth application

    $158 (Avg Bid)
    $158 平均报价
    28 竞标

    It's just a simple...only need to be integrated with one or two api, such that it reads information on an NFC Card through an ACR1311U-N2 / ACR3901U-S1 mobile smart card reader that is connected to my, non-NFC enabled, smart phone via bluetooth. And it GET Request from the API using the data that was read from the card and simultaneously POST Request.

    $211 (Avg Bid)
    $211 平均报价
    10 竞标

    Print Web site from Chrome in Android Phone via Bluetooth Printer

    $22 (Avg Bid)
    $22 平均报价
    4 竞标
    Beacon app iOS and Android 2 日 left
    已验证

    I need an iPhone app. I already have a design for it, I just need it to be built. Also Android. I have a current beta version but lately it crashes on ...it crashes on opening. Once opened i can show you the full scope. I will need to Teamview to have a look. I have the source code. You will need iOS and Android as well as Bluetooth beacon experience.

    $1665 (Avg Bid)
    $1665 平均报价
    80 竞标

    You must be familiar with C BGAPI library from Silicon Labs and Simplicity Studio Development environment. You must be familiar with Bluetooth 5 and use of the coded phy. You must have access to WSTK development boards and EFR32 or BGM13P radio boards. Hourly rate work to support a development.

    $49 / hr (Avg Bid)
    $49 / hr 平均报价
    9 竞标

    I need a print service, standard printing for andr...com/store/apps/details?id=ru.a402d.rawbtprinter&hl=en To me, all I need is: - Connect with the printer (Bluetooth Printer - Default) - Call intent functions to print from web Just one view: The same RawBT Printer 'Settings' view, that the user will configure the Bluetooth app, the paper size, etc.

    $198 (Avg Bid)
    $198 平均报价
    8 竞标

    I am in need of a source code for Both Android and iPhone that is able to coonect to a Bluetooth LE peripheral and send and recieve data and also messure the stimate distance where the peripheral is located

    $635 (Avg Bid)
    $635 平均报价
    19 竞标
    J2ME expert 已经结束 left

    I am looking J2ME expert. With having an experience in SDK.

    $4 / hr (Avg Bid)
    $4 / hr 平均报价
    3 竞标
    J2ME Mobile Expert 已经结束 left

    I need an Android app. I would like it designed and built.

    $555 (Avg Bid)
    $555 平均报价
    1 竞标

    ...meters). When there are preregistered players the app must recognise all other pre registered players within 10 meters. There are no beacons or base stations anywhere - just mobile phone users with their Wifi and/or BT open. You might come across these players anywhere or anytime in- or outdoors. You have to see in your app that there are for example

    $1642 (Avg Bid)
    $1642 平均报价
    35 竞标
    Midlet Application Expert 已经结束 left

    I am looking for an expert who has strong experience in Midlet Application development. Please don't apply if you don't have any real J2ME devices.

    $12 / hr (Avg Bid)
    $12 / hr 平均报价
    7 竞标

    I'm able to connect to bluetooth laser distance measuring device and read the model/make etc from it using microsoft supplied sample code (supplied in Windows-universal-samples-master) github code: [login to view URL] Since windows 10 PC is able to pair/connect and read basic information

    $33 (Avg Bid)
    $33 平均报价
    3 竞标

    ...1 App should be able to initiate pairing to another bluetooth device, save the password of the bluetooth device, reinitiate bt connection if disconnected, switch on bluetooth if somehow bt gets off. App should read the bt data received and whenever a particular phrase is received in the bluetooth data, it should initiate calling to another prefixed

    $114 (Avg Bid)
    $114 平均报价
    7 竞标
    Design of PCB 已经结束 left

    Simple components comprising of the following: - Lithium Battery - Battery level monitor - Induction charging receiver - Microcontroller - Bluetooth transmitter - Temperature sensor - 9-axis motion sensor

    $446 (Avg Bid)
    $446 平均报价
    28 竞标

    ...following functionality: 1- scan all Bluetooth beacons around in x sec (to be adjusted from the App menu) 2-Record beacon UUID, Mac Address, RSSI, distance based on the formula ( Distance = 10 ^ ((TXPower – RSSI)/(10 * N))), time of Mobile phone, GPS location of phone in a file 3- If device is connected to internet, send each data separately by get or post

    $115 (Avg Bid)
    $115 平均报价
    1 竞标

    Design a Bluetooth Hardware Solution

    $20 / hr (Avg Bid)
    $20 / hr 平均报价
    15 竞标

    Bluetooth CANBus Reader Firmware Development (OBDII) Bluetooth CANBus Reader Firmware Development (OBDII) Bluetooth CANBus Reader Firmware Development (OBDII)

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    1 竞标

    I am looking for a java expert who has strong experience in j2me application development. The development is completed but while running the app on j2me devices it says "untrusted". I have paid thawte certificates, but I don't know how sign the app with it. Please feel free if you can immediately.

    $159 (Avg Bid)
    $159 平均报价
    9 竞标

    I have an esc , 1400kv bldc motor , Bluetooth module , Arduino board write a code for me so that I can run my brushless motor via Bluetooth in different desired speed with the help of an app designed by yourself

    $10 / hr (Avg Bid)
    $10 / hr 平均报价
    9 竞标

    Hi. I am trying to develop a Bluetooth device. This Bluetooth device will connect with a corresponding app on an Android/ ios phone. The device will have a fingerprint sensor and a carbon monoxide sensor built in to it. There shall also be a power circuit. The function of the power circuit will be 1. Charge a lithium battery from a micro usb plug. 2

    $197 (Avg Bid)
    $197 平均报价
    10 竞标

    Target device: Any android mobile or tablet Preferred SW: android studio Communication device: Bluetooth wireless Communication protocol: MODBUS RTU Master, 9600,N,1 no parity We need to make a Bluetooth wireless communication application to communicate with its wireless connected MODBUS RTU SLAVE device (an electronic instrument). Few group of values

    $216 (Avg Bid)
    $216 平均报价
    8 竞标

    The Soft-MOS sales system works in the interaction of a web platform that registers and stores the information of products, inventories, invoices, orders etc, and a mobile application that receives and sends the data to the web platform as purchase orders, registration of payments, surveys, POP material installations, define vendor routes, etc. The

    $523 (Avg Bid)
    $523 平均报价
    10 竞标

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    $240 (Avg Bid)
    $240 平均报价
    12 竞标
    bluetooth watch 已经结束 left

    Need someone who can program into a bluetooth watch

    $53 (Avg Bid)
    $53 平均报价
    1 竞标

    Need to get an app made. I need to read the bluetooth data from available and based on that and certain conditions, the app should call a pre fixed phone no. every 15 seconds, three times. If the call gets connected, it disconnects after the first ring.

    $138 (Avg Bid)
    $138 平均报价
    3 竞标
    bluetooth ios app 已经结束 left

    I want an IOS app to control my device which has a bluetooth peripheral (HM10) in it. The app has to connect to the device and send data to the device to control motors. If interested contact for more details.

    $250 (Avg Bid)
    $250 平均报价
    12 竞标

    I need to modify bellow board to work within 2.400Ghz- 2.4950GHZ ISM band. Currently it works around 2.2ghz band. The board should rem...modifications, etc. Help select a low cost PCB manufacturer for a small initial run. I understand that if we use 2.4ghz band it may generate false alarms from nearby wifi and bluetooth devices, that is not an issue.

    $435 (Avg Bid)
    $435 平均报价
    3 竞标

    Looking for a CAD designer for a small 250 Sq Feet Mall shop in Bangalore. The shop wood work is already done, need a designer who can work on...color scheme and beautification. Some minor modifications if suggested can be done. The store will be used for selling electronic products such as projectors, cameras, bluetooth speakers, smart watches etc.

    $95 (Avg Bid)
    $95 平均报价
    36 竞标

    ...could be reset using a Bluetooth interface and a timer option to release all pressure will be needed. Eventually miniaturization will be important but maybe not so in prototype phase. Prototype phase: miniaturization not critical. Constant pressure using pressure sensor. Develop to be compatible with small air pump. Bluetooth phase: simple app to

    $35 / hr (Avg Bid)
    $35 / hr 平均报价
    1 竞标
    build me an iOS App 已经结束 left

    The application is a Bluetooth application with 2-3 pages of control functions to control an external Bluetooth device. There are roughly 20-30 functions in the app. You will be provided a working model of the application in Android format and you will need to copy it and make it look professional.

    $228 (Avg Bid)
    $228 平均报价
    31 竞标

    Need to design some hardware that transmits data using BLE to a smartphone

    $36 (Avg Bid)
    $36 平均报价
    15 竞标
    Vibe Direct logo design 已经结束 left

    We are a new company that sells services directly to a group of friends and famil...family.....think direct sales, MLM, peer to peer marketing. We need a logo for the corp name, Vibe Direct....we also need a logo for Vibe Mobile, and Vibe Signals, which are proximity beacons that send out a bluetooth message to anyone within a certain limited radius.

    $23 (Avg Bid)
    $23 平均报价
    23 竞标

    Project scope is for a ESP32 module to have bidirectional communication over Bluetooth to a Windows10 application. For that, is required the development of ESP32 firmware and the development of a Windows10 application. Freelancer needs to already have a ESP32 development platform. ESP32 used module for development purposes need to be one of three

    $171 (Avg Bid)
    $171 平均报价
    7 竞标
    Fix PCB Design 已经结束 left

    We're usin...using a PCB connected to an adafruit bluetooth feather board to power LEDs and to charge an iPad. We have a few designs that aren't working well, and are in need of someone to produce an improved design that fits our requirements. The board just needs to power LED lights, charge an iPad, and connect to a bluetooth component with firmware.

    $477 (Avg Bid)
    $477 平均报价
    24 竞标

    This project needs mp3 file transfer from Android to arduino over hm-10 bluetooth module and write it to SD card with SD card reader. I need working sample code and connection scheme that how wires have been connected to arduino. My budget is about 100-150 USD.

    $158 (Avg Bid)
    $158 平均报价
    18 竞标

    The main idea is to make a similar product like the vaadu captor and adding a lot of enhancement : [login to view URL] what we need ...captor and adding a lot of enhancement : [login to view URL] what we need to improve regarding the vaadu captor are : - wifi(dual channel) / bluetooth.

    $1034 (Avg Bid)
    $1034 平均报价
    17 竞标

    Bluetooth CANBus Reader Firmware Development (OBDII)

    $111 (Avg Bid)
    $111 平均报价
    1 竞标

    We need APP to work with Bluetooth and Login page: Request: Discover devices Read and send strings (UART) Read async Login Page Read json to save config Multiplatform (Android and IOS) Cordova or Xamarin

    $262 (Avg Bid)
    $262 平均报价
    25 竞标

    Write an easy android app for scan QR code and send to mysql db. App must: Scan QR code (will be only numbers) and send to remote mysqldb these data: "date", "time", "ID reader" (I must be able to modify this number) and "scanned code". I need scan a lot of barcode so the priority it's that the scan must be fast and with less clicks. So...

    $232 (Avg Bid)
    $232 平均报价
    54 竞标

    ...Redeem or delete by the User. The type of Notification will be text, image and video if possible. The beacons will automatically ON the Bluetooth based on from and to timing. Or user can keep it manual to start the Bluetooth on and it will start the service also at that time. Also it will show the available URL from the beacon and open it in the Browser

    $432 (Avg Bid)
    $432 平均报价
    4 竞标

    Allwinner V3s Soc, running embedded linux, need driver for bluetooth and wifi with Realtek RTl8723DS

    $860 (Avg Bid)
    $860 平均报价
    6 竞标

    ...to build a desktop application to communicate Windows PC (Windows 7, Windows 8, Windows 10) and Bluetooth low energy device. The code is currently written in Java. The developer must be able to read the code and convert it into C++. The features which are implemented in Java must be implemented in C++. A link to the Java application is as follows "https://github

    $228 (Avg Bid)
    $228 平均报价
    3 竞标

    I need to connect 2 Raspberry Pi zero Ws to each other. One Pi is connected to 8 pressure sensors and i...broadcasting the values, the other is connected to a touchscreen and needs to display the results using Tkinter GUI library. All programming should be done in python 3. For bluetooth communication possibly needs to use and setup the BlueZ library.

    $185 (Avg Bid)
    $185 平均报价
    21 竞标

    ...szczególności dodanie funkcji wpółdzielenia danych między użytkownikami aplikacji, możliwości komunikacji chat (w kolejnym kroku również audio/wideo), komunikacja poprzez Bluetooth LE, funkcje in-app purchase). Preferowani wykonawcy ze strefy czasowej CET dobrze posługujący się językiem polskim. Szczegółowa dokumentacja projektu po podpisaniu NDA

    $4849 (Avg Bid)
    加精 保密协议
    $4849 平均报价
    18 竞标

    I need develop firmware for [login to view URL] modules. It is bluetooth temperature/humidity and audio sensor.

    $532 (Avg Bid)
    $532 平均报价
    16 竞标

    ...for power supply and controlling the 16X16 led lights (WS2812B). Also we need Android App for controlling the led lights like sending customize or fixed images, text using BLUETOOTH. The freelancer has to provide the specification of the battery on which this board along with Led lights will work. The battery has to be portable. If interested please

    $398 (Avg Bid)
    $398 平均报价
    11 竞标

    I need to control a arduino vía Bluetooth from a app on a tablet android . On the app has to appear some questions and if you answer correct to can move the car for a short time or few meters . The idea is to make a contest with several participants . The car and the arduino code I already have it so it’s only the android app

    $409 (Avg Bid)
    $409 平均报价
    52 竞标