Labview gyro工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    1,699 labview gyro 搜到的工作,价格货币为 USD

    Please no time-wasters, please do not place a bid if you do not intend to honour that bid! I have a a ControlByWeb X-418. It has connected to it at the moment 4x Distance Lasers which emit signal 4ma to 20ma based on the distance. The ControlByWeb unit is connected to our network via ethernet. I want a visual showing 4x tanks which reflect the tank level in the tank based on the formula, and cha...

    $608 (Avg Bid)
    $608 平均报价
    15 个竞标

    ...discover where in the signal pathway that is happening by monitoring a number of places using a multi-channel oscilloscope and then a high level programming language such as Labview to compare the signals. It would only be a a few days work we would expect. We are based in London and the test equipment is on-site so reasonable proximity to London would

    $946 - $1891
    本地
    $946 - $1891
    0 个竞标

    report needs to be 8k to 10k words a short presentation heart rate sensor no hardware, need to simulate it on MATLAB or LABView or any other softwrae Mention in your proposal that which software you will use to simulate

    $86 (Avg Bid)
    $86 平均报价
    14 个竞标

    I need a LabVied VI that can do realtime LTC Timecode deconding and encoding. this will be run on an MyRIO unit so should either be written for this or easily ported from another DAQ system. Ideally it would utilise the RT Module and FPGA Module and operate with as little overhead as possible. The VI should be able the, in terms of the decoder, output a string or timestamp with the current real ti...

    $345 (Avg Bid)
    $345 平均报价
    5 个竞标

    Hello dear this is for the labview project as discussed :)

    $46 (Avg Bid)
    $46 平均报价
    1 个竞标

    Hello, i need some expert with perfect skills in Unreal Engine and know how the Gyroscope/Accelerome...with perfect skills in Unreal Engine and know how the Gyroscope/Accelerometers work in iPhone/Android devices. I have the game almost ready, but i think we can maybe improve Gyro/Acc movements with the right developer. Simple work for right person.

    $221 (Avg Bid)
    $221 平均报价
    3 个竞标
    Nordic NRF52 Firmware 已经结束 left

    ...The firmware should: On boot, sets up the pins and peripherals. Has functions to read/write I2C data to/from the IR Thermometer, Heart Rate & Pulse, Accelerometer, Gyro, Compass, ECG Clock, and Battery Charger. Has functions to read/write 4-wire SPI to/from the ECG sensor Has functions to read I2S data from MEMS microphone Has functions

    $1114 (Avg Bid)
    $1114 平均报价
    9 个竞标
    project in labview 已经结束 left

    the requirement is in the document

    $38 (Avg Bid)
    $38 平均报价
    3 个竞标

    We need a NI LabView expert to develop a Plug and Play Instrument Drivers. It will be based on FTDI D2XX library (a full functions VI library is available) and a full specification will be provided.

    $587 (Avg Bid)
    $587 平均报价
    8 个竞标
    labview project 已经结束 left

    description is on the word file.

    $47 (Avg Bid)
    $47 平均报价
    5 个竞标

    Hi I need some help/training with 5G MIMO Matlab, DSP, prototyping in LabVIEW please let me know if we can work on it, send me your contact details , we can talk about it. Thanks

    $195 (Avg Bid)
    $195 平均报价
    7 个竞标

    ...someone who is experienced in fusing location data. There is x, y data available from an indoor location system (which is pretty accurate). In addition there is acceleration and gyro data available from additional sensors. Goal is to fuse these to datasets in order to get even more accurate results. Programming should be done in MATLAB. I provide sample

    $554 (Avg Bid)
    $554 平均报价
    19 个竞标

    Control a water treatment system that includes pumps , tanks , air compressors using Labview HMI system. Logic includes operation, data collection from digital and analog devices ( 4-20 miliamper )

    $1153 (Avg Bid)
    $1153 平均报价
    22 个竞标

    I'm looking for a LabVIEW 2017 program that controls a Lakeshore 336 temperature controller and an Agilent 4192A impedence analyzer via usb-to-GPIB. The program will be able to set a starting temperature and number of specific temperature steps, e.g., 300K-400K by 10K. At each step the Agilent will probe the capacitance and dielectric constant at three

    $251 (Avg Bid)
    $251 平均报价
    6 个竞标
    Labview expert required 已经结束 left

    labview expert required for interfacing with electronics components

    $29 (Avg Bid)
    $29 平均报价
    14 个竞标
    Labview Programming 已经结束 left

    ...and transmits this information. The data in the form; # sample number , Value ; Where the sample number is a 5-digit integer and Value is a floating-point number. Write a LabVIEW program that reads the data, logs it to a file and graphs it. Simulate the serial communication using a string control. The program should indicate if any samples were not

    $16 (Avg Bid)
    $16 平均报价
    1 个竞标
    Project for Pizviz P. 已经结束 left

    Hi Pizviz P., I noticed your profile and would like to offer you my project. We can discuss any details over chat. The project is working with i2c on labview myRIO using Qwiic IR array MLX90640 ( [登录来查看链接] ) Payment and time can be discussed. Hope to hear from you soon! Thank you

    $72 (Avg Bid)
    $72 平均报价
    1 个竞标

    cần lập trình hiển thị lực với độ biến dạng lên labview,đã có loadcell,hx711,adruino

    $30 (Avg Bid)
    $30 平均报价
    1 个竞标
    BLUETOOTH MODULE 已经结束 left

    Creation of a small module that include chip BLUE-NRG2 + gyro 6 axis. the small module need also a small manual for integration.

    $31 / hr (Avg Bid)
    $31 / hr 平均报价
    20 个竞标

    Expert in electrical engineering or labview is needed to do a small report

    $22 (Avg Bid)
    $22 平均报价
    18 个竞标
    Arduino Nano OLED & Gyro 已经结束 left

    I have an Arduino nano with an OLED screen and a gyro...screen but I am not sure what pins to hook everything up to now that I am uploading the code onto an Arduino nano I have already hooked up the oled screen sucuessfully but the gyro scope I had hooked up to SCL & SDA on the ardunio uno but the nano dose not have pins for those. So I need help :)

    $21 (Avg Bid)
    $21 平均报价
    9 个竞标

    I am looking for a company/Individual providing me with a LabView software solution based on Labview 2014. Here is what needs to be done: A CSV file with time-series data of multiple channels needs to be imported. The data comes from a vibration test, conducted with non NI equipment. A sample of CSV file is attached. One of the channels shall be

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    14 个竞标

    Competent Labview professionals from Mumbai/Pune, Maharastra (India) please get in touch

    $648 (Avg Bid)
    本地
    $648 平均报价
    6 个竞标

    Firmware for LIDAR and MEMS IMU (accelerometer/gyro) data collection and processing. The firmware will simply collect streaming LIDAR data into a 2,520 circular DMA buffer via UART at 230,400 baud. The IMU is a LSM6DS3US via I2C that will trip a hardware interrupt on the STM32F0 when the measurement data is ready. The STM32F0 will read the IMU data

    $42 / hr (Avg Bid)
    保密协议
    $42 / hr 平均报价
    27 个竞标

    I have a project where I installed 2 BLDC Motors. What I want to do is program these two motors with MyRio using LabView and control them using a Joystick as shown in the attachment. I need someone also who can help me how to connect the wires from the BLDC motor controller to myRio. Everything shown in the attachment, I just need someone EXPERT at

    $215 (Avg Bid)
    $215 平均报价
    9 个竞标

    We're expanding our modular robot product with new add-ons that require firmware. While we have active in-house firmware development capab...create the dev custom PCB boards in-house with breakouts for logic probing and debugging before production form factor. The candidate must have experience with accelerometer, gyro, compass, and camera (via dcmi)

    $42 / hr (Avg Bid)
    $42 / hr 平均报价
    26 个竞标

    Hi I am looking for a project on labview National Instruments data acquisition and AD convertor

    $10 / hr (Avg Bid)
    $10 / hr 平均报价
    9 个竞标
    LabVIEW adquisición 已经结束 left

    Necesito un programa que guarde la presión de un manómetro xp2i marca cristal engineering en la conputadora. El manómetro se conecta por USB

    $86 (Avg Bid)
    $86 平均报价
    5 个竞标

    ...circuit -1x compass for heading -1x On/Off Controller with Debounce and -1x I2C Barometric Pressure Sensor (10cm resolution) -1x wireless data nRF24L01+ -1x IMU MPU-6050 (Gyro, Accelerometer) -3x stm32f103cxt6. each connect to one multiplexer which in turn connect to 8 I2C devices. -LOW DROPOUT LINEAR REGULATORS & USB filter. -SMD CHIP ANTENNA

    $393 (Avg Bid)
    $393 平均报价
    7 个竞标

    Design a Raspberry Pi compliant HAT with the following specifications LSM9DS1 ==> Gyro , Compass , Accelerometer MCP3808 ==> Analog Digital converter MCP2515 ==> CAN bus controller MCP2562 ==> CAN Driver 16 Mhz Oscillator for the CAN bus 120 Ohm Termination Resistor for the CAN Bus termination selectable via Jumper 10 PCB Screw terminals

    $192 (Avg Bid)
    $192 平均报价
    31 个竞标

    I need to communicate with arduino using VISA read nand WRITE. I have alot of the code written. I just need someone to finish the communication so i can use PWM ports on ARDUINO using Visa read and WRITE

    $65 (Avg Bid)
    $65 平均报价
    23 个竞标

    ...requirements in signal processing. We are developing a transmitter with digital modulation schemes with shorter delivery time. We developed all the algorithms required in LabVIEW FPGA. The same have to be ported to VHDL and be integrated before programming the Xilinx V6 FPGA on the transmitter. Complete hardware and many of the software blocks in VHDL

    $899 (Avg Bid)
    本地
    $899 平均报价
    11 个竞标

    if someone who can guide and help urgently please let me know

    $25 (Avg Bid)
    $25 平均报价
    21 个竞标
    Project for Muhammad S. 已经结束 left

    hi can u help in an urgent labview task ? calculations too attached due in a few hours

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标
    Project for Marco K. -- 2 已经结束 left

    hi... can u do an urgent labview task ?

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标

    I have an urgent labVIEW task.. can u handle it please

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标
    LabVIEW Interface 已经结束 left

    I need someone to make a simple Labview interface that reads a serial port. Please see attachment for a sample of the serial data.

    $70 (Avg Bid)
    $70 平均报价
    12 个竞标
    Build me a program 已经结束 left

    ...is an arduino uno project in which I want to control a quadcopter but it is automated, and it is having no reciever or transmitter. The program I need is the one that uses gyro sensor(MPU-6050). Algorithm - 1- The motors are started at lowest speeds and they go upto somewhat high speed within 10 seconds, and these speeds are controlled only by the

    $14 (Avg Bid)
    $14 平均报价
    7 个竞标
    Dự án Labview 已经结束 left

    Mình cần 1 bài thu hoạch về mô hình tự động hóa.được thực hiện bởi ngôn ngữ labview

    $222 (Avg Bid)
    $222 平均报价
    1 个竞标

    ...with two (2) MATLAB codes that must be run by MyRIO FPGA to analyse the captured signal. 4- The processed signal should then be accessible on a website (Fig. 3) 5- For part 4 LabVIEW NGX web Module may need to be used. Note 1: ******You MUST have MyRIO****** Note 2: I am not looking for dashboard or something else. Note 3: The currency is in the Australian

    $142 (Avg Bid)
    $142 平均报价
    8 个竞标
    LabVIEW MyRIO Project 已经结束 left

    ...with two (2) MATLAB codes that must be run by MyRIO FPGA to analyse the captured signal. 4- The processed signal should then be accessible on a website (Fig. 3) 5- For part 4 LabVIEW NGX web Module may need to be used. Note 1: ******You MUST have MyRIO****** Note 2: I am not looking for dashboard or something else. Note 3: The currency is in the Australian

    $152 (Avg Bid)
    $152 平均报价
    4 个竞标

    I have 2 PXI cards, One is SMX2044 which is going to be out of calibration soon. It is currently working with that one, but I need to update the driver to the PXI-4065. Can someone please help. I need it to automatically know when to use the SMX2044 vs. PXI-4065. Can the system automatically perform something to switch over the cards when one is due for calibration? Let me know. Thanks

    $144 (Avg Bid)
    $144 平均报价
    5 个竞标

    Design & Development of wearable device with GPS&GPRS along with battery and charger with accelerometer and gyro. The end product should be very compact and thin

    $6775 (Avg Bid)
    $6775 平均报价
    11 个竞标

    I'm opening a Halal restaurant and i need a name which contains Halal or Gyro. my previous restaurant is named HALAL BITES.

    $24 (Avg Bid)
    $24 平均报价
    83 个竞标

    Labview based image segmentation using K means clustering algorithm.. If anyone is ready with this project, text me Thank you

    $142 (Avg Bid)
    $142 平均报价
    7 个竞标

    I need an Android app. I would like it designed and built.

    $485 (Avg Bid)
    $485 平均报价
    17 个竞标

    design the gyro model "ela 07". The design would have to be delivered in 2d for laser or cnc cutting of the pieces. I leave attached photos of what should be done taking the picture of example help to make for the autogyro. I also have a 3d file of the autogyro in case it would work for them. thank you very much

    $174 (Avg Bid)
    $174 平均报价
    9 个竞标

    Study in fractional order (SEPIC) simulation by Matlab and LabVIEW. And writing a academic report on final results.

    $1011 (Avg Bid)
    $1011 平均报价
    25 个竞标

    ...device orientation data, we have integrated this module with stm32, now we need to using the data from GY953, without draft (using filter or other method) 1: the gy953 generates Gyro, acceleration data, and use filter to calculate pitch, yaw, roll data and also quanterion data 2: the data we using have drafting issue , we need to the device orientation

    $128 (Avg Bid)
    $128 平均报价
    5 个竞标

    build a motorcycle device using arduino board+ GSM module+gps Module+ accelerometer+ gyro+Blutooth module+Wifi. device need to have an open app platform for user data.

    $356 (Avg Bid)
    $356 平均报价
    26 个竞标