Labview pic microcontroller工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    7,624 labview pic microcontroller 搜到的工作,价格货币为 USD

    我需要重修一个现有的网站。我已经有设计方案,我需要你为我的项目建立一个网站。

    $175 (Avg Bid)
    $175 平均报价
    12 个竞标

    ...and street-smartness a.k.a sense of“jugaad” will be valued the most. Skills and Expertise: - Hands-on experience in IoT, Embedded Firmware / hardware Development. - Microcontroller based hardware design and development along with embedded programming. - Good understanding of Multi Layer PCB Design and full hardware product life cycle In-depth knowledge

    $12 / hr (Avg Bid)
    $12 / hr 平均报价
    9 个竞标
    QHOLD pic 5 天 left

    I need someone to alter some images.

    $22 (Avg Bid)
    $22 平均报价
    16 个竞标

    Hello Sir. You had bid on my project , I want to make a manetic stripe reader/logger along with a keyboard You had stated that can develop code and can also mak...keyboard You had stated that can develop code and can also make board design and board, at this moment i dont need board but i need code, I want to use AT90USB1286 Teensy2++ microcontroller

    $200 (Avg Bid)
    $200 平均报价
    1 个竞标

    Need the C code of the driver of I2C for Atmel microcontroller. I have uploaded a application note of atmel/microchip you just need to implement it in keiluvision.

    $59 (Avg Bid)
    $59 平均报价
    10 个竞标

    my requirements as shown below [登录来查看链接] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $455 (Avg Bid)
    $455 平均报价
    4 个竞标

    my requirements as shown below [登录来查看链接] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $215 (Avg Bid)
    $215 平均报价
    5 个竞标

    ...choosen component, if it is good for this application [登录来查看链接] [登录来查看链接]:g:vYEAAOSwuQhcTY0D&frcectupt=true [登录来查看链接]

    $174 (Avg Bid)
    $174 平均报价
    14 个竞标
    Trophy icon Photo erase background and beautify pic 已经结束 left

    Take attached pic, remove the background and beautify the photo so that only the person remains. Cleanly remove everything else, leaving only the person and showing no defects on the edge of the person.

    $10 (Avg Bid)
    加保
    $10
    246 项参赛作品
    Arduino cc1101 19 小时 left

    [登录来查看链接] This project has complete code and hardware solutions,...has complete code and hardware solutions, I want to do it in a much simpler way, using cheaper hardware, such as arduino cc1101 433Mhz RF,I need a Arduino, Electronics, Microcontroller expert for my current project. If you have knowledge please bid.

    $293 (Avg Bid)
    $293 平均报价
    13 个竞标
    ECG to LabVIEW using DAQ 已经结束 left

    ...ECG to the heart into a breadboard which is then connected to a DAQ in the computer. We need a VI that will show the pulse on a waveform chart, the BPM, and we need to tell LabVIEW the normal parameter ranges (with 10% accuracy) of the heartbeat. We also need a Boolean light that would indicate if the heartbeat is normal (in the ranges) or abnormal (outside

    $175 (Avg Bid)
    $175 平均报价
    11 个竞标
    Photoshop one pic for me 已经结束 left

    I need someone who photoshop one picture.

    $19 (Avg Bid)
    $19 平均报价
    109 个竞标
    $31 平均报价
    63 个竞标
    lab view task 已经结束 left

    n a flow computer using LabVIEW to compute some important fluid flow parameters. The fluid flows from a region of larger diameter into a region of smaller diameter inside a circular pipe. The design should be capable of analyzing the change in velocity, the change in volumetric flow rate and the change in mass flow rate. further details will be

    $16 (Avg Bid)
    $16 平均报价
    1 个竞标

    the project : The aim of the project is for you to create a small, hand-held, battery-powered IoT device. This will entail interfacing a microcontroller with a sensor and a display and any LEDs, buttons, buzzers etc. as required. You will have a choice of sensor which to use. After that the specific application of the project together with the features

    $131 (Avg Bid)
    $131 平均报价
    5 个竞标

    I have an embedded AtMega328 based project with a ready schematic, that needs to be...AtMega328 based project with a ready schematic, that needs to be converted to a well-designed PCB layout. Work to be done includes placing and routing the main components (microcontroller, BLE module , RFID module) as well as the design of a 13.56MHz antenna for NFC.

    $350 (Avg Bid)
    $350 平均报价
    39 个竞标

    The scope of the project is an update of an old fashioned machine to an automation degree where motors and pneumtic actuators are operatable through an digital interface....of electric motors -Remote monitoring of the actuators and process data -Control library for motor speed, direction, valve control, in a chosen language (c++ or matlab or LabView)

    $3028 (Avg Bid)
    $3028 平均报价
    21 个竞标

    he design and implementation of an automated liquid observation and controlling method utilizing an affordable liquid flow sensor and the microcontroller are presented here which has the ability to assist the health care provider to control the saline circulation rate using Matrix keypad or Android phone. The Arduino Mega (2560) platform has been used

    $151 (Avg Bid)
    $151 平均报价
    6 个竞标

    ...com/sites/default/files/NEO-LEA-M8T-FW3_DataSheet_%28UBX-15025193%[登录来查看链接] on this board: [登录来查看链接] I need to add a bluetooth module with microcontroller and configure/program it (I am open to suggestions but the ESP32 seems suitable, for example this one: [登录来查看链接]

    $12 / hr (Avg Bid)
    $12 / hr 平均报价
    18 个竞标

    INPUT: ______ multiple cctalk coinhoppers, cctalk coinreader & ccnet banknote acceptor YOUR JOB: _________ Create professional software on microcontroller to create a flexible money change machine using the 3 different devices with LCD screen for the enduser. Flexible with configuration file and LCD screen. (also used to program the system) Create

    $1024 (Avg Bid)
    $1024 平均报价
    12 个竞标

    Hi. I am trying to build a PCB. It will have the following sensors. Fingerprint sensor: Gas sensor : Micro-controller: Charging controller : It will also have 2 leds ( Green and Amber) for indicating power on and charging. The circuit will also have a master power switch for powering the circuit and a fire switch. The circuit will be powered by a 18650 LiPo battery. The micro-controller ...

    $192 (Avg Bid)
    $192 平均报价
    18 个竞标

    ...sensor ([登录来查看链接] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([登录来查看链接]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $223 (Avg Bid)
    $223 平均报价
    6 个竞标
    Arduino with esp8266-01 已经结束 left

    I have an ATmega microntroller (same as uno) reading a voltage divider connected to a 9v battery. I want to send that data to another ATmega microcontroller using esp8266-01 and have it displayed to a 16x2 lcd. I have designed circuit schematics already

    $136 (Avg Bid)
    $136 平均报价
    42 个竞标
    gmsk tx and rx is LabVIEW 已经结束 left

    I want to implement I-Q Based gmsk tx and rx is LabVIEW using frequency hopping using usrp2920 see page 12-15 in pdf1

    $109 (Avg Bid)
    $109 平均报价
    3 个竞标

    I'm just learning w3schools and need just a small snippet of code for a pic with text (see [登录来查看链接])...see attached files. 2 pics/with text must go directly below mountain on 4th column on [登录来查看链接] of site www.christopherfrancis.us. as per example in news.png.... [登录来查看链接] and [登录来查看链接] go in css folder..

    $22 (Avg Bid)
    $22 平均报价
    33 个竞标

    Project Overview: We are working on a HS Microphone driver for the STM32F7 microcontroller. We have a base project that functions periodically that needs to be debugged so that the microphone works 100% of the time. More Details: For a little background, The original project was ported from the STM32Cube Expansion MEMs MIC 1 project and I have modified

    $233 (Avg Bid)
    $233 平均报价
    8 个竞标
    STM32F7 microcontroller 已经结束 left

    Looking for an electronics engineer having good experience with STM32F7 microcontroller. I will provide the details of work in chat

    $232 (Avg Bid)
    $232 平均报价
    14 个竞标
    ATTiny214 sleep mode 已经结束 left

    I am trying to set ATTiny214 into power down sleep mode and wake it up using PIT (Periodic Interrupt Timer). I want the program to turn on a LED and then the Microcontroller sleeps for 8hrs, then wakes up and turns Off the LED Afro 16hrs.

    $134 (Avg Bid)
    $134 平均报价
    4 个竞标

    We need a skilled LabView specialist to develop a software to control two different motors and put sample tubes (one by one) to a specific point. Then measure an electrical signal to be converted into a numeric value of ligth intensity.

    $1315 (Avg Bid)
    $1315 平均报价
    25 个竞标

    Currently sys: Windows XP Laview 7.1 I have a set of subvi for SMX2044, I need to migrate it to PXI-4065 so that my system will work with the new dmm cards. can you please help me do this. Thank you [登录来查看链接] Budget <$200

    $132 (Avg Bid)
    $132 平均报价
    4 个竞标

    ...distance sensor ( [登录来查看链接] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core ([登录来查看链接]) is to be used, which takes over the control. The result of the distance measurement should be displayed

    $272 (Avg Bid)
    $272 平均报价
    2 个竞标

    ...embedded C programming in automotive domain Experience in AUTOSAR based software development. Good knowledge on Software Debugging & Testing methodology Good knowledge on microcontroller architecture, memory layouts, device drivers, compiler & debuggers Knowledge of diagnostic/communication stack/MCAL/NVRAM/Bootloader etc Hands on experience with CAN, I2C

    $2270 (Avg Bid)
    $2270 平均报价
    2 个竞标

    Need a tutor for basic project; using LabVIEW to communicate microcontroller in PCB (Printing Circuit Board).

    $2096 (Avg Bid)
    $2096 平均报价
    26 个竞标

    The scope of the project is to develop firmware for a PIC microcontroller based pcb. There are 11 opto couplers on the board. The optocouplers takes signals from the 7 segment LCD that I am running using an arduino and 7 segment display. The cables are looped from the 7 segment LCD and are connected to the pitch screws on the card. When the opto

    $152 (Avg Bid)
    $152 平均报价
    5 个竞标

    redraw or fix a old logo in to Hi res files. also in vector format.

    $20 (Avg Bid)
    $20 平均报价
    32 个竞标

    ...the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmware

    $4301 (Avg Bid)
    $4301 平均报价
    16 个竞标

    ...the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmware

    $1321 (Avg Bid)
    $1321 平均报价
    24 个竞标

    Hi want to implement matlab or LabVIEW code for dynamic frequency allocation according to number of users inGSM. Using Frequency hopping techniques

    $28 (Avg Bid)
    $28 平均报价
    1 个竞标

    Hi want to implement matlab or LabVIEW code for dynamic frequency allocation according to number of users inGSM. Using Frequency hopping techniques

    $28 (Avg Bid)
    $28 平均报价
    1 个竞标

    ...consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a microcontroller interfced

    $3 / hr (Avg Bid)
    $3 / hr 平均报价
    1 个竞标

    ...consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a microcontroller interfced

    $3 / hr (Avg Bid)
    $3 / hr 平均报价
    1 个竞标
    Project for G-Bird M. 已经结束 left

    Hi ...We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 平均报价
    1 个竞标
    Project for Harish H. 已经结束 left

    Hi H...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 平均报价
    1 个竞标
    Project for Sanyukta K. 已经结束 left

    Hi ...We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 平均报价
    1 个竞标
    Project for Anh N. 已经结束 left

    Hi A...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 平均报价
    1 个竞标
    Project for Stanislav V. 已经结束 left

    Hi ...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation.

    $494 (Avg Bid)
    $494 平均报价
    1 个竞标

    Hi R...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be Freezed based on final Estimation.

    $494 (Avg Bid)
    $494 平均报价
    1 个竞标

    My name is Preetam Singh Rathore. I'm designing a product. And for that purpose I need an android app which can transmit as well as receive the data from a BLE microcontroller.

    $172 (Avg Bid)
    $172 平均报价
    6 个竞标

    There is a circuit, which is generally a speaker one and an inverter one which composed of the microcontroller and few IC's. I have the code and circuit, you just need to simulate and make some changes if needed for the exact output.

    $19 (Avg Bid)
    $19 平均报价
    10 个竞标

    ...sensor ([登录来查看链接] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([登录来查看链接]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $180 (Avg Bid)
    $180 平均报价
    9 个竞标