Labview project report report工作

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    1,293 labview project report report 找到的工作,价格在 USD

    if someone who can guide and help urgently please let me know

    $29 (Avg Bid)
    $29 平均报价
    12 竞标

    hi can u help in an urgent labview task ? calculations too attached due in a few hours

    $20 (Avg Bid)
    $20 平均报价
    1 竞标

    hi... can u do an urgent labview task ?

    $20 (Avg Bid)
    $20 平均报价
    1 竞标

    I have an urgent labVIEW task.. can u handle it please

    $20 (Avg Bid)
    $20 平均报价
    1 竞标

    I need someone to make a simple Labview interface that reads a serial port. Please see attachment for a sample of the serial data.

    $70 (Avg Bid)
    $70 平均报价
    12 竞标
    Labview MyRIO2 3 日 left
    已验证

    Hi All, I have a project for someone who is expert in using MyRIO, MyRIO FPGA and MyRIO web services (Fig1 and 2). The project steps are explained as below: 1- The MyRIO should capture a signal (can be anything) with the sampling frequency of 5KHz. 2- Eleven (11) seconds of the signal must be captured. 3- I will provide you with two (2) MATLAB codes

    $161 (Avg Bid)
    $161 平均报价
    2 竞标

    I need to program two BLDC Motors, by controlling them using an analog joystick. The program must be done on labview and then uploaded into MyRio module. Please only experts into this field respond. The algorithm is simple I only need to control the speed and direction of the motors.

    $95 (Avg Bid)
    $95 平均报价
    7 竞标
    Dự án Labview 已经结束 left

    Mình cần 1 bài thu hoạch về mô hình tự động hóa.được thực hiện bởi ngôn ngữ labview

    $222 (Avg Bid)
    $222 平均报价
    1 竞标

    Hi All, I have a project for someone who is expert in using MyRIO, MyRIO FPGA and MyRIO web services (Fig1 and 2). The project steps are explained as below: 1- The MyRIO should capture a signal (can be anything) with the sampling frequency of 5KHz. 2- Eleven (11) seconds of the signal must be captured. 3- I will provide you with two (2) MATLAB codes

    $142 (Avg Bid)
    $142 平均报价
    8 竞标
    LabVIEW MyRIO Project 已经结束 left

    Hi All, I have a project for someone who is expert in using MyRIO, MyRIO FPGA and MyRIO web services (Fig1 and 2). The project steps are explained as below: 1- The MyRIO should capture a signal (can be anything) with the sampling frequency of 5KHz. 2- Eleven (11) seconds of the signal must be captured. 3- I will provide you with two (2) MATLAB codes

    $152 (Avg Bid)
    $152 平均报价
    4 竞标

    I have 2 PXI cards, One is SMX2044 which is going to be out of calibration soon. It is currently working with that one, but I need to update the driver to the PXI-4065. Can someone please help. I need it to automatically know when to use the SMX2044 vs. PXI-4065. Can the system automatically perform something to switch over the cards when one is due for calibration? Let me know. Thanks

    $144 (Avg Bid)
    $144 平均报价
    5 竞标

    Labview based image segmentation using K means clustering algorithm.. If anyone is ready with this project, text me Thank you

    $143 (Avg Bid)
    $143 平均报价
    7 竞标

    Study in fractional order (SEPIC) simulation by Matlab and LabVIEW. And writing a academic report on final results.

    $1001 (Avg Bid)
    $1001 平均报价
    26 竞标
    IOT Training 已经结束 left

    ...using MatLab, LabVIEW, and others, fed from embedded controllers, lab equipment and other instruments. 5. Analyze collected data to produce necessary. 6. Work with our customers to expedite automated test and data collection. 7. Hands-on practice on protocol like MQTT. 8. Design & Development of applications to manipulate the project according to

    $338 (Avg Bid)
    $338 平均报价
    15 竞标

    GPS based vehicle driving simulation in LabView

    $70 (Avg Bid)
    $70 平均报价
    3 竞标

    I need Labview NI for monotonic and cyclic triaxial test. Inputs are Load, External dial gauge, 2 LVDTs and pressure differential gauge.

    $279 (Avg Bid)
    $279 平均报价
    5 竞标

    注册或者登录后来查看详情。

    加封

    Hey, This is Meetkumar Patel from Dev Industries. Currently we are working with some Vision based inspection projects based on LabVIEW software. Where i need a person who knows the LabVIEW programming in Vision and Report Generation field. We have USB3.0 high resolution camera to capture the images of the product to be inspected. After capturing the

    $655 (Avg Bid)
    $655 平均报价
    3 竞标

    Hello guys, I am pretty new in eletronics and automation and I would like to learn more about Labview. I would like to measure, write on screen and in a .txt file 2 channels with hall effect sensors. I want to measure RPM. I am using Arduino Uno, [login to view URL] and USB serial cable. I would like in the second moment using something different from serial communication

    $142 (Avg Bid)
    $142 平均报价
    22 竞标
    Senzor Ultrasonic Labview 已经结束 left

    Realizare .vi in Labview pentru senzorul [login to view URL]

    $80 (Avg Bid)
    $80 平均报价
    1 竞标

    I want to make a programme to send and receive AM and BPSK waves at 51.2 khz on Raspberry pi3

    $161 (Avg Bid)
    $161 平均报价
    17 竞标
    labview DLMS 已经结束 left

    read/write data to Smart meter with DLMS protocol using labview

    $104 (Avg Bid)
    $104 平均报价
    12 竞标
    LabVIEW Controls Program 已经结束 left

    ...system, which is to be controlled by a DAQ system using a Laptop. I am looking for someone to write me two separate (but very similar) LabView programs for both of the test setups shown in the attached schematics. The LabVIEW program should have a simple interface, in which an operator can set the test pressure and click "Go" and the system will pressurize

    $3698 (Avg Bid)
    $3698 平均报价
    33 竞标

    i have one task related to labview and matlab so please bid only if you are pro in [login to view URL] details in private chat

    $73 (Avg Bid)
    $73 平均报价
    17 竞标
    LabView and Matlab expert 已经结束 left

    i have one task related to labview and matlab so please bid only if you are pro in [login to view URL] details in private chat

    $77 (Avg Bid)
    $77 平均报价
    17 竞标

    Design and simulate a typical RF Telecommunication receiver system IN SIMULINK/MATLAB/LABVIEW

    $157 (Avg Bid)
    $157 平均报价
    32 竞标

    professional on LabView and Pythone

    $106 (Avg Bid)
    $106 平均报价
    6 竞标
    LABVIEW PROGRAMMER 已经结束 left

    WE ARE LOOKING FOR EXPERIENCE PERSON WHO HAVE KNOWLEDGE AND WORKING EXPERIENCE IN LABVIEW PROGRAMMING OR MATLAB PROGRAMMING

    $3 / hr (Avg Bid)
    $3 / hr 平均报价
    21 竞标

    I need a labview application that will run a similar system [login to view URL] - simulated system Labview 2010 (National instrument Industrial PC) -with DAC6518 OR arduino PLC based (industrial grade hardware will be provided) menu based with admin settings to set controls, time, temperature ..etc. product selection (program

    $484 (Avg Bid)
    $484 平均报价
    17 竞标

    I am Lakshminarayana, currently pursuing in Post-Graduation(D...Lakshminarayana, currently pursuing in Post-Graduation(Digital Electronics). I am in need of the project mentioned above based on the Labview software. So let me know if anybody able to do the project within a week. For more information about the project, check the document attached below

    $149 (Avg Bid)
    $149 平均报价
    2 竞标

    ...a small machine builder that manufactures all types of machinery. We currently have a project that requires the modification of a current Labview program. The current program is a standardized test program that our customer uses. We need to adapt their Labview program to our machine. The machine itself is a used to measure the gauss value of a magnetized

    $1218 (Avg Bid)
    $1218 平均报价
    17 竞标

    Hello, I'm looking for a skilled freelancer to build a LabView VI that reads incoming data from a serial port and plots the results on a series of graphs that continuously update in real time and then saves all the data to a excel file after closing the session. The data streaming from the serial port is a single delimited array that contains a series

    $426 (Avg Bid)
    $426 平均报价
    28 竞标

    write a program in LabView and report

    $13 / hr (Avg Bid)
    $13 / hr 平均报价
    10 竞标

    In Labview, I want an alpha numeric string generator where I can generate multiple length passwords of numbers and upper/lower case letters. I also want the capability to eliminate certain characters as needed. An example would be certain characters that can cause confusion like I, 1, l, O, 0.

    $368 (Avg Bid)
    $368 平均报价
    19 竞标
    Project for Ahmed Z. 已经结束 left

    Hi ahmedxahid, I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have to implement a Microgrid control strategy with MYRIO controller using labview. The microgrid will be connected to solar panels, battery for charging and 1 phase lamp load. It should also be able to disconnect from the grid if there

    $150 (Avg Bid)
    $150 平均报价
    1 竞标

    can someone write a quick program to read DC voltage from a 9V battery using USB Agilent 34410 and record data every 1 min in txt file? Thanks

    $70 (Avg Bid)
    $70 平均报价
    4 竞标

    We have an almost complete automatic test rig written in LabVIEW. The control and acquisition hardware is NI cRIO We need someone to make minor modifications and possibly offer ongoing support in the future. You should be familiar with LabVIEW coding for cRIO including the internal FPGA We are based just south of Milton Keynes, if this is of interest

    $38 / hr (Avg Bid)
    本地
    $38 / hr 平均报价
    1 竞标

    We are undertaking the following area Embedded, PLC, Labview, We are providing solutions for Industrial Automations. We are doing Customized Electronic Control Board Development

    $15 / hr (Avg Bid)
    $15 / hr 平均报价
    5 竞标
    Write some software 已经结束 left

    I need you to develop some software for me. I would like this software to be developed for Windows . LabViEW sequential switching of contactors and igintion of thyristor without using sequence structure and wait function .By writing a boolean arrray to digital port via DAQ assistant .The switching time and sampling frequency should be entered by the

    $160 (Avg Bid)
    $160 平均报价
    3 竞标

    I need someone to add 21-CFR-Part-11 compatibility to my existing Labview Applications.

    $142 (Avg Bid)
    $142 平均报价
    7 竞标
    LabVIEW Project 已经结束 left

    We are in need of a LabVIEW developer to create a wrapper for a .NET interface.

    $179 (Avg Bid)
    $179 平均报价
    18 竞标

    We are looking for a LabView specialist with a microelectronic background and ideally experience with medical devices to modify a control software for a laboratory demonstrator. Work must be carried out at our location in London as device can't be moved from the laboratory.

    $52 / hr (Avg Bid)
    $52 / hr 平均报价
    8 竞标

    Rotork is looking for Lab Technicians with the following requirements • Support development team in setting up test fixtur...can help increase productivity. • Maintain health and safety standards inside the lab premises. Preferred skills • Knowledge in testing PCB based products. • Knowledge in NI LabVIEW. • Good knowledge in MS Excel/Access.

    $4 / hr (Avg Bid)
    $4 / hr 平均报价
    4 竞标

    ...white box) on LabVIEW environment. Sound knowledge on National instrument hardware (cDAQ, RIO) Good understanding of Test suite development architectures and frameworks. Knowledge on other network protocols like Modbus, Profibus, Foundation field bus etc Desired skills: Certification in LabVIEW (CLAD, CLD, CLED) Experience working on LabVIEW common code

    $8 / hr (Avg Bid)
    $8 / hr 平均报价
    11 竞标

    I need a LabVIEW VI to be developed so I can learn some necessary programming skills as a start. What does the VI do? The VI needs to complete the following function, 1. Generate a frequency sweep signal (aka, chirp), x, for one analogue output channel. 2. While the signal is used to actuate an external circuitry, the response signal, y, from the

    $290 (Avg Bid)
    $290 平均报价
    6 竞标

    We are seeking a consultant to migrate several Xilinx K7, K7 Ultra and/or V7 FPGA-based DSP Apps (dev...Apps (developed using Vivado) to OpenCL so they can run on Intel, AMD/ATI, NVIDIA and mobile GPUs. Ideally, the OpenCL acceleration would fit into our existing Windows / LabVIEW framework so we could have compatibility with our current set of apps.

    $9212 (Avg Bid)
    $9212 平均报价
    11 竞标

    ...box) on LabVIEW environment. * Sound knowledge on National Instruments hardware (cDAQ, RIO) * Good understanding of Test suite development architectures and frameworks. * Knowledge on network protocols like Modbus, Profibus, Foundation field bus etc. Desired skills: Certification in LabVIEW (CLAD, CLD, CLED) Experience working on LabVIEW common code

    $5 / hr (Avg Bid)
    $5 / hr 平均报价
    4 竞标

    ...Evaluate final product’s overall performance, reliability and safety Alter and modify design to meet requirements and to eliminate malfunctions Estimate budget and scope of project Solicit observations from operators Prepare product reports and documentation Engage in lifelong learning and develop new theories or methods Requirements Proven working experience

    $59 / hr (Avg Bid)
    $59 / hr 平均报价
    33 竞标
    Labview help 已经结束 left

    The topic would be how LabVIEW can be useful on vehicle bench testing. I would like to see how you would use LabVIEW to communicate with the vehicle through CAN bus and AQD system. Some sample LabVIEW sample code would be nice.

    $54 (Avg Bid)
    $54 平均报价
    9 竞标

    Need develop embedded system to control solenoid valve, proximity sensor, accelerometer using LabVIEW arduino interface.

    $175 (Avg Bid)
    $175 平均报价
    25 竞标