Linksys ata firmware development company工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    6,472 linksys ata firmware development company 搜到的工作,价格货币为 USD
    data entry 6 天 left

    ...collecting, researching and entering data into Salesforce, while maintaining accurate company information that is applicable to Absolute’s business. A Data Entry Associate to update and maintain information in Salesforce, while leveraging multiple data sources to perform company research. Our ideal candidate has essential skills including; proficiencies in

    $15 - $25 / hr
    $15 - $25 / hr
    0 个竞标

    ...for a team familiar with Air Print / Google cloud printer firmware development and certification. Hardware / firmware development is a crucial part of this project. We are looking for a developer who is capable of handling the firmware and hardware development as well. - Hardware / Firmware documentation is: [登录来查看链接]

    $13 / hr (Avg Bid)
    $13 / hr 平均报价
    6 个竞标

    We're looking for the programmer for the cc2541 chip. (hex - iar) The device has two modes. - Scanning and Transmitting. - Transmitting only. It should communicate via atmega via Uart. Please see the document for details. (at commands technical pdf or docx document)

    $852 (Avg Bid)
    $852 平均报价
    12 个竞标

    I need you to develop some code on the ESP8266 (or ESP32) to be able to register securely and onboard with AWS IoT Core with WiFi via a Mobile UI. The application UI would need to allow for AWS User Registration to allow control to only the device the user has registered. The architecture needs to be able to support mass Onboarding of devices and self registration with AWS. The function of the...

    $936 (Avg Bid)
    $936 平均报价
    19 个竞标
    Raspberry camera design 6 天 left
    已验证

    I need a camera design for raspberry pi 3, but instead of the flat cable, I need a rca connector, the same way it exists in cftv cameras. The sensor used will be t...raspbery camera. I need something like the attached photo but with rca connectors instead of the flat cable for communication. I need the project files (gerber, bom, schema) and firmware.

    $111 (Avg Bid)
    $111 平均报价
    2 个竞标

    We are looking for Firmware development that enables the overclocking and increase the performance of Hashrates of our PC Miner. After development it need be tested to check as the mining results will be received at the mining pools to avoid overheating and any other damages. More details of our PC miner and existing hash rates will be shared.

    $4429 (Avg Bid)
    $4429 平均报价
    12 个竞标

    We are looking for a freelancer with hands-on experience on QT embedded software development. As the first stage of the project we want to see a demo firmware made. We would prefer to use Raspberry Pi for our development. When we switch ON the unit, a logo animation will be played on boot up. Followed by the following buttons shown on the left side

    $919 (Avg Bid)
    $919 平均报价
    15 个竞标

    We are looking for a freelancer with hands-on experience on QT embedded software development. As the first stage of the project we want to see a demo firmware made. We would prefer to use Raspberry Pi for our development. When we switch ON the unit, a logo animation will be played on boot up. Followed by the following buttons shown on the left side

    $57 - $226
    $57 - $226
    0 个竞标

    ...software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors (Modbus) Firmware of the

    $983 (Avg Bid)
    $983 平均报价
    9 个竞标

    ...software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors (Modbus) Firmware of the

    $565 - $1018
    $565 - $1018
    0 个竞标

    ...experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [登录来查看链接] Firmware will control the following: 1) 7 inch capacitive

    $15542 (Avg Bid)
    $15542 平均报价
    14 个竞标

    Need to add video transcoding into sample application [登录来查看链接] I.e. need to add splitter and video_encode components. Input - raw H264 video file (recorded with raspivid). Dispay decoded video (already done in sample source file) Output - send to sdout raw H264 video

    $611 (Avg Bid)
    $611 平均报价
    7 个竞标

    ...experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [登录来查看链接] Firmware will control the following: 1) 7 inch capacitive

    $745 (Avg Bid)
    $745 平均报价
    9 个竞标

    This is a project for a IOT product. We have received a router hardware. The...issues in the openwrt build system for this hardware. This job involves interfacing with the chinese manufacturer of the hardware, building the firmware using the openwrt build system and testing the firmware on the hardware. The job can be done remotely or onsite in Mumbai

    $40 / hr (Avg Bid)
    $40 / hr 平均报价
    1 个竞标

    I need basic firmware to be designed for my microcontroller ESP32 with Arduino IDE... Functionalities needed: 1. Remote Application Update 2. IOT Integration with Alexa/AWS and Google Home 3. ESP32 to ESP32 communication master slave for multiple room controllers 4. Single Master ESP32 will communicate to internet and all slave will communicate to master

    $423 (Avg Bid)
    $423 平均报价
    14 个竞标

    I have the marlin firmware code and I want to modify the firmware to have a 4th axis so it would be x y z a , "a" would be the 4th axis. at the moment it works with 3 axis x y z

    $59 (Avg Bid)
    $59 平均报价
    5 个竞标

    1. INTRODUCTION Our company has recently developed a new electronic TFT control interface based on existing TFT product but adding some new features. The purpose of this document is to define the requirements for a new firmware development based on Microchip MPLAB Harmony platform. 2. TFT CONTROLLER HARDWARE TFT controller is an embedded hardware

    $8959 (Avg Bid)
    $8959 平均报价
    37 个竞标

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started

    $1234 (Avg Bid)
    $1234 平均报价
    13 个竞标

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started

    $13 / hr (Avg Bid)
    $13 / hr 平均报价
    15 个竞标

    ...can provide Greek - English or English - Greek translations. My most recent job was the translation of a 30k word script for Ata translations. Except for that, I've been working as a part-time News translator for a company called "Lime Capitals" and I have translated various product packagings! My fluency in Greek and English, along with my friendly

    $9 (Avg Bid)
    $9 平均报价
    1 个竞标

    ...Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in how Embedded Software development works and collaborate with developers of PCB and / or firmware to load, debug and run sniffing and probes on hardware and serial lines where

    $37 / hr (Avg Bid)
    $37 / hr 平均报价
    11 个竞标

    ...software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors (Modbus) Firmware of the

    $1475 (Avg Bid)
    $1475 平均报价
    18 个竞标

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output

    $807 (Avg Bid)
    $807 平均报价
    7 个竞标

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output

    $920 (Avg Bid)
    $920 平均报价
    3 个竞标

    Needa fix bugs during upload of previousy working firmware and libraries on YUN, now crashing on YUN Rev2. URGENT need.

    $180 (Avg Bid)
    $180 平均报价
    11 个竞标
    Electrical Engineer 7 小时 left
    已验证

    Need an EE who is proficient and is looking for a lot of work.. Current project is Class 3 medical device that will integrate a large m...actuators, a custom (designed by said EE) interface board, and touch screen display. Previous work experience with FDA approved med device is ideal. Schematic + layout + firmware (extra credit) experience required.

    $54 / hr (Avg Bid)
    $54 / hr 平均报价
    31 个竞标

    We Require an Electrical Engineer who can Design and Develop a Custom PCB and Guide Firmware development for RTOS based system We have existing design that needs enhancing and expanding to support additional ports and functions. We have multiple power transform functions to control motors , senses etc and require someone experienced to design PCBs

    $425 (Avg Bid)
    $425 平均报价
    27 个竞标

    Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital

    $727 (Avg Bid)
    $727 平均报价
    13 个竞标

    ........... Done. Juniper Networks NS-ISG 2000 OS Loader Version 1.1.6 Initialize FBTL 0.. Done Hit any key to load new firmware Hit any key to load new firmware Hit any key to load new firmware Hit any key to load new firmware Loading default system image from on-board flash disk... +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    $105 (Avg Bid)
    $105 平均报价
    5 个竞标

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip)

    $436 (Avg Bid)
    $436 平均报价
    24 个竞标

    Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital

    $868 (Avg Bid)
    $868 平均报价
    16 个竞标

    Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital

    $2160 (Avg Bid)
    $2160 平均报价
    13 个竞标

    Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital

    $684 (Avg Bid)
    $684 平均报价
    4 个竞标

    Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital

    $1024 (Avg Bid)
    $1024 平均报价
    8 个竞标

    OKI C711 prints on banners until 1.3 meters of length. I need some modification (I don´t know if it´s firmware/software, new hardware or both) to make it print on continuos media from multitpurpose tray. I need a RIP software to otimization the printer job. To complete the job is necessary: RIP software, modification the printer, report to execute

    $1249 (Avg Bid)
    $1249 平均报价
    6 个竞标

    PLEASE NOTE: This is NOT a PCBA designing /development job. Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog

    $691 (Avg Bid)
    $691 平均报价
    11 个竞标

    Hello! I have a Linksys router that needs to setup OpenWRT. Need to get in touch with someone that know OpenWRT. Thank you.

    $148 (Avg Bid)
    $148 平均报价
    8 个竞标

    ...PCBA designing /development job. Project requirement include the following: Selecting a ready to use development board for testing purpose. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output Firmware of the unit should

    $573 (Avg Bid)
    $573 平均报价
    12 个竞标
    Smoke Detector 已经结束 left

    NB-IoT MQTT Firmware/Hardware, PCB design, Prototype, Mobile App

    $3068 (Avg Bid)
    $3068 平均报价
    37 个竞标

    a CAN bus based bootloader firmware for mpc5777c and PC side utility to send the Srec format image to the target. the bootloader firmware and pc utility has to implement erase, program and verify flash operations. the pc side utility is preferred to be written in python with generic API to adapt to different CAN-USB adaptor (we wil specify one for the

    $1275 (Avg Bid)
    $1275 平均报价
    15 个竞标

    ...JSON. The system must be scalable and extensible so that additional APIs can be integrated into the system in the future and translation tables can be modified to accommodate firmware updates resulting in format changes such as input order or the addition of new data. This module requires hexadecimal code detection and the appropriate classification of

    $167 (Avg Bid)
    $167 平均报价
    12 个竞标
    BlueNRG-2 Firmware 已经结束 left

    I need someone to help with the development of firmware for BlueNRG-2 system on a chip from STMicroelectronics preferably in Keil uVision. The system will comprise two BlueNRg modules and a smartphone application as described in the document. More detailed description can be provided upon request!

    $861 (Avg Bid)
    $861 平均报价
    14 个竞标

    Ongoing work for firmware with PsoC family of MCUs Expert Level, we have two years of knowledge in this field and need someone that has a lot more knowledge than us specifically pertaining to PsoC environment

    $24 / hr (Avg Bid)
    $24 / hr 平均报价
    6 个竞标

    i want custom firmware that have devfee pool

    $15 (Avg Bid)
    $15 平均报价
    1 个竞标

    ...the I2C or SPI bus for WiFi control, packets and Bluetooth Control and the UART will be used for 2-way pass-through Bluetooth comms (as Serial Port Profile device). For Development, an Arduino MEGA hooked up to ESP-32 via RX3/TX3 at 19200 Baud and the SPI bus will work fine. Baud rate for Serial Passthrough is MAX 19200 because the ATmega2560 is custom-clocked

    $545 (Avg Bid)
    $545 平均报价
    8 个竞标

    circuit Designing, PCB Designing, Firmware Development, PCB prototyping, small scale PCB production, automation projects, Arduino projects, final year engineering projects.

    $26 (Avg Bid)
    $26 平均报价
    11 个竞标
    Firmware Ip Camera 已经结束 left

    I need the firmware for a camera I designed, using OV5647 sensor and QCA9377 wifi. I have the pcb project and I need the firmware so the camera can work. I just need the firmware.

    $165 (Avg Bid)
    $165 平均报价
    5 个竞标
    CANINE ACTIVITY TRACKER 已经结束 left

    ...TO BUILD A DOG ACTIVITY TRACKER , SUCH AS FIT BARK / WHITSLE. I WOULD PREFER TO WORK WITH SOMEONE WHO HAS WORKED ON ACTIVITY CLASSIFICATION OF A PET TRACKER BEFORE AT THE FIRMWARE LEVEL AND DATA PROCESSING LEVEL. MULTIPLE DOG BREEDS AND VARIABLE SIZES ARE THE CHALLENGE WHICH NEED TO BE MITIGIATED , 3/6 AXIS ACCELERO. DATA NEEDS TO BE PROCESSED AND

    $700 (Avg Bid)
    $700 平均报价
    3 个竞标
    Ip camera firmware 已经结束 left

    I need the firmware for a camera I designed, using OV5647 sensor and QCA9377 wifi. I have the pcb project and I need the firmware so the camera can work. I just need the firmware.

    $301 (Avg Bid)
    $301 平均报价
    7 个竞标

    I am looking for someone with experience in Software / Firmware . Looking to be able to place mini LCD screen to an item (e.g a cup) then the screen can receive command from an app to display images play small videos , sensor and a speaker to play mp3,. trying to work on the Concept Exploration. This is a personal project so hoping

    $21 / hr (Avg Bid)
    $21 / hr 平均报价
    15 个竞标