Programming labview microcontrollers工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    1,867 programming labview microcontrollers 搜到的工作,价格货币为 USD

    ...project is to discover where in the signal pathway that is happening by monitoring a number of places using a multi-channel oscilloscope and then a high level programming language such as Labview to compare the signals. It would only be a a few days work we would expect. We are based in London and the test equipment is on-site so reasonable proximity

    $946 - $1891
    本地
    $946 - $1891
    0 个竞标

    report needs to be 8k to 10k words a short presentation heart rate sensor no hardware, need to simulate it on MATLAB or LABView or any other softwrae Mention in your proposal that which software you will use to simulate

    $86 (Avg Bid)
    $86 平均报价
    13 个竞标

    I need a LabVied VI that can do realtime LTC Timecode deconding and encoding. this will be run on an MyRIO unit so should either be written for this or easily ported from another DAQ system. Ideally it would utilise the RT Module and FPGA Module and operate with as little overhead as possible. The VI should be able the, in terms of the decoder, output a string or timestamp with the current real ti...

    $345 (Avg Bid)
    $345 平均报价
    5 个竞标

    Hello dear this is for the labview project as discussed :)

    $46 (Avg Bid)
    $46 平均报价
    1 个竞标
    PAYGO smart meter 已经结束 left

    Developer needed with strong skills in PCB design and microcontrollers (i.e Arduino) to design smart energy meter, that can be used in pay as you go systems. The designed board should be able to receive sms to activate connections and when time pass(1day-1week) it disconnect the power connection.

    $27 / hr (Avg Bid)
    $27 / hr 平均报价
    22 个竞标
    project in labview 已经结束 left

    the requirement is in the document

    $38 (Avg Bid)
    $38 平均报价
    3 个竞标

    We need a NI LabView expert to develop a Plug and Play Instrument Drivers. It will be based on FTDI D2XX library (a full functions VI library is available) and a full specification will be provided.

    $587 (Avg Bid)
    $587 平均报价
    8 个竞标
    labview project 已经结束 left

    description is on the word file.

    $47 (Avg Bid)
    $47 平均报价
    5 个竞标

    I have a a ControlByWeb X-418. It has connected to it at the moment 4x Distance Lasers which emit signal 4ma to 20ma based on the distance. The ControlByWeb unit is connected to our network via ethernet. I want a visual showing 4x tanks which reflect the tank level in the tank based on the formula, and changing color from red to orange to green. I want to be able to run this on a windows 10pc an...

    $255 (Avg Bid)
    $255 平均报价
    20 个竞标

    Hi I need some help/training with 5G MIMO Matlab, DSP, prototyping in LabVIEW please let me know if we can work on it, send me your contact details , we can talk about it. Thanks

    $195 (Avg Bid)
    $195 平均报价
    7 个竞标

    Control a water treatment system that includes pumps , tanks , air compressors using Labview HMI system. Logic includes operation, data collection from digital and analog devices ( 4-20 miliamper )

    $1153 (Avg Bid)
    $1153 平均报价
    22 个竞标
    Part Time Programmer 已经结束 left

    ...skill-sets and qualifications: • C programming for embedded systems related to cellular communications and GPS applications. (State number of years) • Cellular modem technology and protocols including SMS and the AT command set • GPS technology and protocols. • Thorough experience with microcontrollers and particularly Microchip PIC microcontroller

    $42 / hr (Avg Bid)
    $42 / hr 平均报价
    28 个竞标

    I'm looking for a LabVIEW 2017 program that controls a Lakeshore 336 temperature controller and an Agilent 4192A impedence analyzer via usb-to-GPIB. The program will be able to set a starting temperature and number of specific temperature steps, e.g., 300K-400K by 10K. At each step the Agilent will probe the capacitance and dielectric constant at three

    $251 (Avg Bid)
    $251 平均报价
    6 个竞标

    microcontrollers, Esp32 , LCD, and displaying the value from code in LCD_I2C

    $27 (Avg Bid)
    $27 平均报价
    2 个竞标

    Need to build a board with pi zero w, arduino and battery back up and usb power charger

    $661 (Avg Bid)
    $661 平均报价
    21 个竞标
    Labview expert required 已经结束 left

    labview expert required for interfacing with electronics components

    $29 (Avg Bid)
    $29 平均报价
    14 个竞标
    Labview Programming 已经结束 left

    ...and transmits this information. The data in the form; # sample number , Value ; Where the sample number is a 5-digit integer and Value is a floating-point number. Write a LabVIEW program that reads the data, logs it to a file and graphs it. Simulate the serial communication using a string control. The program should indicate if any samples were not

    $16 (Avg Bid)
    $16 平均报价
    1 个竞标
    Project for Pizviz P. 已经结束 left

    Hi Pizviz P., I noticed your profile and would like to offer you my project. We can discuss any details over chat. The project is working with i2c on labview myRIO using Qwiic IR array MLX90640 ( [登录来查看链接] ) Payment and time can be discussed. Hope to hear from you soon! Thank you

    $72 (Avg Bid)
    $72 平均报价
    1 个竞标

    Need a schematic diagram showing the connections of micro controller with photo detector and infrared light. Note: Requires basic knowledge of microcontrollers

    $17 (Avg Bid)
    $17 平均报价
    7 个竞标

    ...event (as a game for my guests) a wearable containing microcontrollers (RS822 maybe?) communicating with each other in some kind of a network. The guests should be able to input data on a website and it should be stored on the microcontroller. When close to each other 2 guests' microcontrollers with same input (eg letter A) should be able to recognize

    $272 (Avg Bid)
    $272 平均报价
    4 个竞标

    cần lập trình hiển thị lực với độ biến dạng lên labview,đã có loadcell,hx711,adruino

    $30 (Avg Bid)
    $30 平均报价
    1 个竞标

    Expert in electrical engineering or labview is needed to do a small report

    $22 (Avg Bid)
    $22 平均报价
    18 个竞标
    Create a program 已经结束 left

    I have a microcontroller that has software loaded on it. I need someone to duplicate the software and be able to load it onto the microcontrollers. The microcontroller has a USB port on the side of it as well as a micro SD card port but i believe the USB port is what will be used to load the software onto the microcontroller. I believe this is eeprom

    $2286 (Avg Bid)
    $2286 平均报价
    24 个竞标

    I am looking for a company/Individual providing me with a LabView software solution based on Labview 2014. Here is what needs to be done: A CSV file with time-series data of multiple channels needs to be imported. The data comes from a vibration test, conducted with non NI equipment. A sample of CSV file is attached. One of the channels shall be

    $16 / hr (Avg Bid)
    $16 / hr 平均报价
    14 个竞标

    Competent Labview professionals from Mumbai/Pune, Maharastra (India) please get in touch

    $648 (Avg Bid)
    本地
    $648 平均报价
    6 个竞标

    I have a project where I installed 2 BLDC Motors. What I want to do is program these two motors with MyRio using LabView and control them using a Joystick as shown in the attachment. I need someone also who can help me how to connect the wires from the BLDC motor controller to myRio. Everything shown in the attachment, I just need someone EXPERT at

    $215 (Avg Bid)
    $215 平均报价
    9 个竞标

    Hi I am looking for a project on labview National Instruments data acquisition and AD convertor

    $10 / hr (Avg Bid)
    $10 / hr 平均报价
    9 个竞标
    LabVIEW adquisición 已经结束 left

    Necesito un programa que guarde la presión de un manómetro xp2i marca cristal engineering en la conputadora. El manómetro se conecta por USB

    $86 (Avg Bid)
    $86 平均报价
    5 个竞标

    I need to communicate with arduino using VISA read nand WRITE. I have alot of the code written. I just need someone to finish the communication so i can use PWM ports on ARDUINO using Visa read and WRITE

    $65 (Avg Bid)
    $65 平均报价
    23 个竞标

    ...are developing a transmitter with digital modulation schemes with shorter delivery time. We developed all the algorithms required in LabVIEW FPGA. The same have to be ported to VHDL and be integrated before programming the Xilinx V6 FPGA on the transmitter. Complete hardware and many of the software blocks in VHDL are already built by our team. The requirement

    $899 (Avg Bid)
    本地
    $899 平均报价
    11 个竞标

    if someone who can guide and help urgently please let me know

    $25 (Avg Bid)
    $25 平均报价
    21 个竞标
    Project for Muhammad S. 已经结束 left

    hi can u help in an urgent labview task ? calculations too attached due in a few hours

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标
    Project for Marco K. -- 2 已经结束 left

    hi... can u do an urgent labview task ?

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标

    I have an urgent labVIEW task.. can u handle it please

    $20 (Avg Bid)
    $20 平均报价
    1 个竞标
    LabVIEW Interface 已经结束 left

    I need someone to make a simple Labview interface that reads a serial port. Please see attachment for a sample of the serial data.

    $70 (Avg Bid)
    $70 平均报价
    12 个竞标
    Dự án Labview 已经结束 left

    Mình cần 1 bài thu hoạch về mô hình tự động hóa.được thực hiện bởi ngôn ngữ labview

    $222 (Avg Bid)
    $222 平均报价
    1 个竞标

    ...with two (2) MATLAB codes that must be run by MyRIO FPGA to analyse the captured signal. 4- The processed signal should then be accessible on a website (Fig. 3) 5- For part 4 LabVIEW NGX web Module may need to be used. Note 1: ******You MUST have MyRIO****** Note 2: I am not looking for dashboard or something else. Note 3: The currency is in the Australian

    $142 (Avg Bid)
    $142 平均报价
    8 个竞标
    LabVIEW MyRIO Project 已经结束 left

    ...with two (2) MATLAB codes that must be run by MyRIO FPGA to analyse the captured signal. 4- The processed signal should then be accessible on a website (Fig. 3) 5- For part 4 LabVIEW NGX web Module may need to be used. Note 1: ******You MUST have MyRIO****** Note 2: I am not looking for dashboard or something else. Note 3: The currency is in the Australian

    $152 (Avg Bid)
    $152 平均报价
    4 个竞标

    I have 2 PXI cards, One is SMX2044 which is going to be out of calibration soon. It is currently working with that one, but I need to update the driver to the PXI-4065. Can someone please help. I need it to automatically know when to use the SMX2044 vs. PXI-4065. Can the system automatically perform something to switch over the cards when one is due for calibration? Let me know. Thanks

    $144 (Avg Bid)
    $144 平均报价
    5 个竞标

    ...experience: 1 - 5 years • Experience in software design and development using in OOD, TDD, ATDD • Good at C / C ++ Python programming languages for embedded systems software • Good background with Microprocessor and Microcontrollers (ARM, PIC, 8051, etc.) and development tools (GNU GCC, IAR, ICE, etc.). • Experience with Embedded OS (Linux, FreeRTOS)

    $12 / hr (Avg Bid)
    $12 / hr 平均报价
    23 个竞标

    I need a programm..."intensity" of the flicker by changing a variable in the code. This needs to be written in C (not assembler), so I can maintain it later (I program a lot in C for other microcontrollers, but the ATTiny 10 is giving me problems because of its reduced instruction set). This should be a relatively simple and straightforward project.

    $148 (Avg Bid)
    $148 平均报价
    8 个竞标

    Labview based image segmentation using K means clustering algorithm.. If anyone is ready with this project, text me Thank you

    $142 (Avg Bid)
    $142 平均报价
    7 个竞标

    I have a project with 2 micro controllers communicating over RS-232 and I have the need for a robust communications and command processing protocol on one of the microcontrollers (the slave device). Commands are received between start and end markers < and > to ensure the full message is received before processing. eg: <command> Your function must

    $182 (Avg Bid)
    $182 平均报价
    16 个竞标

    Study in fractional order (SEPIC) simulation by Matlab and LabVIEW. And writing a academic report on final results.

    $1011 (Avg Bid)
    $1011 平均报价
    25 个竞标

    We need a programmer for writing / implementing code on MSP430, STM32 and LPC54xxx microcontrollers. The applications are industrial control and automation devices.

    $192 (Avg Bid)
    $192 平均报价
    13 个竞标
    IOT Training 已经结束 left

    ...PIC, AVR, ARM Cortex, Zigbee, Arduino and others to interface with lab test equipment and various devices under test. 4. Collect measurement data at the lab using MatLab, LabVIEW, and others, fed from embedded controllers, lab equipment and other instruments. 5. Analyze collected data to produce necessary. 6. Work with our customers to expedite automated

    $337 (Avg Bid)
    $337 平均报价
    14 个竞标

    GPS based vehicle driving simulation in LabView

    $70 (Avg Bid)
    $70 平均报价
    3 个竞标

    I need Labview NI for monotonic and cyclic triaxial test. Inputs are Load, External dial gauge, 2 LVDTs and pressure differential gauge.

    $279 (Avg Bid)
    $279 平均报价
    5 个竞标

    I require an LCD display library for text and graphics written in C for Microchip PIC microcontrollers using the XC8 compiler and MPLABX environment. This could be a port of the Arduino LCD library 'U8g2'. See ttps://[登录来查看链接] There are details on how to port to other microcontroller platforms. See [登录来查看链接]

    $227 (Avg Bid)
    $227 平均报价
    9 个竞标

    注册或者登录后来查看详情。

    加封