1. 将测温电路输出的模拟电压信号经过模数转换器变成数字电压信号输入到FPGA 2. 对测量值和期望值进行比较（PID） 3. FPGA根据比较结果生成PWM（作为开关）控制加热电路 4. 加热电路是一根电阻丝，通电流来加热 5. 配置通信模块：将通信模块与FPGA连接，并使用相应的协议（例如UART、SPI或I2C）配置通信模块。 6. 编写上位机软件，能设置目标温度（4.27K），显示当前温度 7. 测温电路电压与温度的关系是65V/K，环境温度波动是10mK，要达到的温度的分辨率是10µK 8. 测温电路已经做好，不包含在这个项目里 9. 开发环境：Vivado 2018.3 FPGA型号：AX7A200T
我需要重修一个现有的网站。我已经有设计方案，我需要你为我的项目建立一个网站。
...SPI接口； 电容屏接口，使用IIC接口； 4. SD卡接口 CPU要预留出SD/TF卡接口管脚； 5. 网络接口 使用RMII接口的PHY，所以RMII接口管脚也要预留出来，PHY使用DP83848IVV； 6. 串行通信接口 预留出1个RS232用的UART； 预留出1个RS485用的UART，另外还要预留1个管脚用来RS485的方向控制； 7. USB接口 预留出1个USB接口用来外接USB设备； 8. 旋转编码器接口 使用2个外部中断口来接增量型旋转编码器； 9. 蜂鸣器接口 使用一个PWM输出来控制蜂鸣器； 10. GPIO接口 至少预留出32个GPIO口用于外部设备的控制，如键盘输入，指示灯输出，三态安全开关输入，三档选择开关输入等； 基本驱动需求 1. 旋转编码器输入驱动 旋钮编码器驱动要求能判断编码器旋转方向，目前这两个GPIO口不给上层读取, 直接由驱动发送按键值，就是加入LINUX的输入事件，正向旋转发送键值59，反向旋转发送键值60，从event0读取。 2. RS485驱动 RS485需要1个方向控制脚，当向对应的UART发送接收数据时，方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率，输出的时间，输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留24个GPIO作为薄膜按键的输入，目前的驱动是作为GPIO口来读取的；最好也缴入LINUX的输入事件，按不同的按键发送不同的键值，从event0读取；外接USB键盘驱动最好也从event0读取。 5. 其他GPIO驱动 每个GPIO口都可以通过驱动设置输入/输出。 6. 触摸屏驱动和外接USB鼠标驱动 7. 触摸屏驱动和外接的鼠标驱动设备文件最好固定，例如触摸屏固定使用event2，USB鼠标固定使用...
FUNCTIONS FOR SNAPSELL APP 1. TAKE A PIC THROUGH APP AND SELL THROUGH APP ONLINE PROFILE SHOP 2. LIVE ONLINE CHAT WITH SELLER 3. LOCATION ENABLED TO FIND NEARBY SELLERS OR BUYERS 4. ADD FRIENDS AS BUYER OR SELLER. 5. LOGIN WITH QQ，WEIBO，WECHAT，FB，TWITTER 6. PROFILE THAT HAVE BUYERS FOLLOWING,LISTINGS,OFFER MADE STUFF THAT U LIKED 7. INVITE FRIENDS THROUGH ALL CHINA SOCIAL MEDIA NETWORK 8. THIRD PARTY PAYMENT, 支付宝，财付通，paypal 9. Able to choose Delivery companies 10. VIDEO,8 SECS TO SHOW PRODUCT。 11. Full vi design and animation 12. Full html 5 with English and chinese website to show app introduction 13. SHAKE FUNCTION ABLE FOR USERS TO WIN SOMETHING,LIKE SMALL SAMPLES OR RESTURANT VOUCHERS ETC.(ANY BETTER SUGGUESTIONS?) 14. QR CODE 这一场革命的电子商务应用程序将带着大家一起！snapsel...
需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者, $500 做酬劳, 超过或不及都照比例计算. 例如: 增加 200 位中国区支持赞助者则以 US$400 做酬劳, 1000 位则以 US$2000 做酬劳. NavSpark 活动网址:
Hi Mahamud R., this is Rhonda Sweetman and you did a logo for me already for this business but I need you to do another one because the guy who is a partner in the business already had one and we want you to dress it up if possible. I am trying to use the chat but it won't give me a box to write my messag...Mahamud R., this is Rhonda Sweetman and you did a logo for me already for this business but I need you to do another one because the guy who is a partner in the business already had one and we want you to dress it up if possible. I am trying to use the chat but it won't give me a box to write my message in so I am doing it here. I can get emails so maybe that is the way to go. I will send you a pic of the logo that is he has now. Please let me know how if you get this...
I'm looking for an experienced illustrator to create an anime-style color portrait of an older woman. The character should be depicted as tired and grumpy, capturing the es...expertise: Applicants should have a strong portfolio demonstrating proficiency in this specific style. - Emotion portrayal: The ability to convey the specific emotion of 'tired and grumpy' in a fresh and engaging way is crucial. - Attention to detail: It's important that the final piece is rich in color and in line with the anime aesthetic. I own a wolf sanctuary. I’m just looking for a profile pic of me, tired, grumpy and holding the coffee cup that says "I will bite you". The cartoon photo of the dark haired woman is what I’m looking for. The blonde photo is a face ...
I'm looking for a skilled graphic designer to Photoshop a red nose onto an image of a person, akin to what Barstool Sports did for Roger Goodell. Key details include: - The final product will be used for personal wear. This won't be part of a promotional campaign. - The design layout should feature the image on the front of the t-shirt with a bl...additional text is required. - The photoshopped image should be positioned in the center of the t-shirt, not covering the entire front. The perfect freelancer for this job would have experience in graphic design and Photoshop, along with t-shirt design. A keen eye for detail and a flair for playful designs would be extremely valuable for this project. I would like picture look like the red nose pic but using the picture on ...
Black And white Themed Account Details page with a side bar. Side bar includes: Account Details Security Billings Subscriptions Account Details Page allows to edit profile forname, lastname, contact No. without email verification code, contains dummy profile avatar and pic uploader. Security page allows to change password or email with email verification code Billings page shows payments done for past plans (dummy transactions) Subscriptions shows current running subscriptions (dummy plans) Sidebar when on mobile will not show but a small arrow shows which brings out the side bar in smooth animation.
need to change document to look more professional have it save as a pdf and have auto signature on it i will need my logo put on to it. i will need to be able to insert pictures i will be needing to do all of this from a Samsung tablet, so if i take the pic on the tablet i want to be able to insert that pic into the doc all of the information on the original doc will stay the same and i want them to stay as tick boxes the attached doc is an example of that the original doc is
...using all available features, but you can see the capabilities and features here: • Implement my custom Algorithm to calculate matches based on selected filters • Require Chat messaging • Modify software to allow user to record audio and send as message or leave as bio • Profile pic can only come from user camera, not gallery or pasting • Require Match alert notifications • User should be able to exclude matches based on any particular filter/option • PH7 BUILDER Software can create hundereds of fake profiles for testing purposes • Users with specific interests can also be discovered via a keyword/phrase search • Require Likes • Require Block/Report feature. Profile creation:
Big Bad Bee is the logo im looking for. Thinking tough looking Bee ( Hornet , Wasp) in front of a Baseball. I have something semi put together it just needs tweaked (i think). This logo will go on a sleeve of a baseball jersey as well as the bac...im looking for. Thinking tough looking Bee ( Hornet , Wasp) in front of a Baseball. I have something semi put together it just needs tweaked (i think). This logo will go on a sleeve of a baseball jersey as well as the back of a sweatshirt ,maybe on a hat too. It needs to be detailed enough when it gets scaled to be printed on the back of a sweatshirt it doesnt get pixalated. Im attaching a pic of what i have (kind of) in mind. Im thinking if the Bee could be placed in front of a baseball it would be perfect. But im open to ot...
I need to design a logo Name is Kitty Seat, font as close to the pic as I can get. Green with a black trim. Also toilet as part of logo, see animation attached. Need to modify the toilet slightly. Will send modification when you are selected.
...proper power delivery and protection. - Include circuitry to switch between power sources (USB Type-C and battery power bank) as needed, with appropriate voltage regulation and power management. 9. RGB LEDs: - Integrate the RGB LEDs into the schematic, providing connections for power, ground, and control signals. - Include circuitry for programmable control of the LEDs, possibly using PWM signals from the RK3588 SoC or an external microcontroller. When designing the schematic, be sure to follow best practices for signal integrity, power distribution, and thermal management. Consult the datasheets and reference designs for each component to ensure proper connections and compatibility. Additionally, consider factors such as power consumption, board layout, and user inter...
Greetings. I have a snow globe collection that depicts all the cities I’ve lived in (see attached pic). One of the places I’ve lived is Koh Chang, an island in Thailand, that does not sell snow globes. “Chang” means “elephant”, so I bought an elephant snow globe. I am looking for an artist who can transform this snow globe into something more personal… I am wondering if you could chip away at the elephants on the base and, with some sort of paste, smooth over the base and create custom elements to affix? I would like to add: Silhouette of a school (I was a volunteer teacher for a year or so) Silhouette of my friend’s restaurant Beach Jungle (with at least one monkey) Paint the name “Koh Chang” I can send design referen...
I'm looking for a design for a small pocket size embroidery for my sweatshirt. Here is the concept: - a design like a sunflower (see the pic of a sunflower) - but the peddles of the flower are made of 6 PICKLEBALL PADDLES - Each pickleball paddle has a letter on it. The letters are: L, M, J, S, A, B Key Requirements: - Should look sleek and cool - Simplistic but pretty
The old Pic Configuration file needs updating. If this is the sort of project you can undertake, please let me know. I have an old configuration file that specifies a Pic12508. As it's an old file I have no idea as to the assembly language used. You can configure it on MPLAB 8.92 or MPLAB 6.20 I need this configuration file to be updated to run on a PIC12F508 preferred or 8-pin pic of your choosing. I will need from you: 1: Text file of the new configuration. 2: ASM file of the new configuration. 3: C file of the new configuration if so required. 3: Hex file for testing of this new configuration. 4: Full documentation on what IDE is used as to how this is configured.
We're looking for a programmer with experience of the STM8 MCU. We've already created a program that works well, but flash memory is limited to 8KB and we don't have enough space to store our entire program. The current size of the compiled code is 10 KB. We're looking for a programmer capable of compacting our specific code and libraries used. Our current software includes the follow...experience of the STM8 MCU. We've already created a program that works well, but flash memory is limited to 8KB and we don't have enough space to store our entire program. The current size of the compiled code is 10 KB. We're looking for a programmer capable of compacting our specific code and libraries used. Our current software includes the following libraries: - W...
I am in need of a digital artist with a knack for creating stunning, real-life illustrations. Specifically, I'm seeking an illustration featuring a couple (use a pic of me and my wife). The illustration style should lean towards realism, capturing the lifelike essence of the subjects. The finished artwork will be used for mobile wallpaper IDEAL CANDIDATE: - Extensive experience in digital art - Proven ability to create realistic illustrations - Experience in creating illustrations for advertising materials - Artistic and creative, with a keen eye for details and color
...expensive transistors (or a lot in parallel). Options for bridge or flyback converters are needed. 7. Switch. So that you can turn off the converter without disconnecting the wires. 8. Connectors. At the input, you can use contact pads for soldering 4 sq. wires. mm, at the output - for soldering wire 1.5 sq. mm. Any CAD can be used. If desired, you can use MCUs of easily accessible series: AVR, STM, PIC. This will not be done at the factory, so you can do simple tracing - to check errors and for ease of assembly. Let me remind you that I will need the assembled device. This means it will have to be sent to me using the UkrPoshta or NovaPoshta. Meest is acceptable, but I am far from it. If you do not understand the abbreviations, then you will not be able to submit the device an...
I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application.
I need a 47 width by 81 height banner for an authors - 1) logo at the top 2) author pic and author book cover and URL at the bottom - available on amazon world-wide and other bookstores
Landing page targeted at medical spa houses for treatment device (blue light) required. Tonality / style (see attached pic) slightly futuristic, calm, relaxing Full text provided Link to device provided. Only design needed until Monday/Tuesday next week
I am looking for an expert in MVC C#, familiar with web application loading, . My specific need is to fix the bug of data only populating when the web page gets reloaded only There is a feature where clicking on a word in my application will display relevant...information within the page in a grid format - Working with an API to populate the grid Ideal skills: - Expertise in MVC C# - Experience with grid population in web applications - Familiarity with working APIs without extensive documentation. More Info. There is a page that requires an update, So when a user clicks on a word on the page more details should appear in the info section, as in the attached pic Notes: This is a small job, so there are no milestones, either you do it or not. You will only get paid once it is d...
...of power electronics principles, converter topologies such as buck, boost, buck-boost, flyback, forward, full-bridge, half-bridge, and their operating principles, electrical circuits, semiconductor devices, magnetics, and passive components. Familiarity with control systems theory including feedback, PID control, digital control techniques, and modulation schemes (e.g., Pulse Width Modulation - PWM). Knowledge of transformer and inductor design principles, including core materials, winding configurations, and losses. Regulatory Compliance: Familiarity with safety standards and regulations governing high voltage systems (e.g., UL, IEC). Problem-solving Skills: Ability to troubleshoot and resolve PCB layout issues related to power distribution, thermal management, and signal integr...
I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board as a platform...
I'm seeking a creative designer to craft a visually engaging poster for a Water Baptism event. The main message of this poster should focus on showing my half body normal pic but should look like i have just come out from the water the water effect splash. Key requirements: - Symbolism and meaning: The poster should effectively convey the significance of Water Baptism as a spiritual act through visuals, rather than text. - Creative depiction: The design should be visually striking and evocative, leaving a lasting impression on viewers. - Inclusion of specific elements: Incorporate water droplets and the image of a person as if they've just emerged from water. This imagery is meant to visually represent the concept of Baptism. Ideal Skills: - Graphic Design: Proficiency i...
...may be moderate, and I'll attempt to enhance these using software tools. - I'm looking for the head swaps to be clearly comical, providing instant humor. The heads, however, should seamlessly merge with the bodies, appearing to be a perfect fit. Please note there is no bidding here with $$ per say but a flat rate of $1.25 per swap, with no tip. To select a designer, the best re-sample of the pic below will be chosen and awarded between all submissions by tomorrow, 04/11 sometime around noon-ish (CST) , Project to re-image below as well as my feeble attempt to show exactly what I will want to expect (but not so re-touched). This will ensure I can compare apples to apples. Ideal skills and experience for this project include: - Proficiency in photo editing soft...
To add on a frame and elements on existing madagascar pic
I'm looking for a skilled Photoshop professional to manipulate my images by removing or adding objects. Your tasks will specifically involve seamless object removal and addition, ensuring the final result looks natural and unified. I am wanting one image done. Our wedding pics are 10 years old now and I’m waiting a pic of my husband with his grandparents edited. The picture of the 5 of us did not turn out very good and it’s the only one we got of us. I need someone to photoshop the 5 of us together somehow using the other 2 photos. Please only include bride, groom, baby, and both grandparents.
I need 2 custom professional logos for JFreeze Studio, a brand embodying photography, art, and music. The logos need to be a bold, vibrant, modern design with an artsy, sporty, and edgy vibe. The 1st logo will be JFreeze Studio only which will embody all elements. the 2nd logo will be JFreeze Studio Photography that will be close to matching with the 1st JFreeze Studio logo. ...Strong experience in logo and brand design. - A portfolio featuring bold and modern design. - Expertise in creating black and white designs, and incorporating symbolic elements strategically. Please provide examples of your past work, specifically logos that are bold, vibrant, and in black, white and multicolor. I have an examples of ideas I have worked on myself but need to really fine tune. Pic ideas...
The project revolves around developing a bespoke PID software based on a specific logic. Key...bespoke PID software based on a specific logic. Key Aspects: - Programming will be done using C++ - The software should be compatible with PIC16F15325, SOIC14 microcontroller - The desired features include a control algorithm, sensor data acquisition, and user interface - A sampling rate of 50 Hz is expected for the software Ideal Skills: - Proficiency in C++ programming - Experience with PIC microcontrollers - Familiarity with PID control systems - Understanding of sensor data acquisition and UI development This project offers the chance to work on developing a unique PID software and should be a great opportunity for those with expertise in microcontroller systems and C++ pr...
I'm seeking a proficient programmer to translate a short program (approx 1000 lines) written in assembler to C code for a PIC16. The task will require: - creating global variables and constants - creating functions based on the subroutines. - remove code that has a P876 compiler switch (the code will run on a PIC16F883 only). - create a simple flowchart of the program flow and... - ...replace goto statements with C type loops (for, while, do) and function calls. - adding comment blocks ahead of each function with some notes of what the code is doing. - check where the global variables are actually used and where possible change scope to a local variable. - create the main() function - add comments for anything that looks like a bug or incorrect. - compile code using Microchip XC8 c...
We require microcontroller programming services to execute sensor interfacing and manage communication protocols. Our project needs an expert who can: - Interface our 32 bit PIC microcontroller with temperature sensors, analog circuits like Op-Amp and ADC - Implement SPI communication protocol within the microcontroller Experience with PIC microcontrollers is a must, along with a sound understanding of sensors, analog-to-digital conversion (ADC), and SPI protocol. Proven experience in similar tasks will make you an ideal candidate for us.
We have a desktop aplication (c#, dotnet 4.5) that sending bulk message to whatsapp using (chromedriver and whatsapp web - using Selenium Driver). Main points: - Send text message, attched files, attached pic with caption text - Extract contacts. - Extract groups numbers - Autoreply, depends on list of stored choices. - Number's filter (has whatsapp or not) we are using : as a refernce . now it's not working any more. Liverary will be handled with source code. Kindly, who only have an eperience on this issue. Thank you
I am on the search for a talented graphic designer to create a profile picture for my Telegram and Instagram accounts. This is what I have in mind: - The style must be cartoon. - The color scheme should incorporate bold and bright colors. - The design simplicity is not a priority, I am more interested in a profile picture that stands out and catches the eye. The right freelancer for this project should have: - Experience in graphic design, with a portfolio showcasing their previous work in cartoon style. - Excellent knowledge of color theory and experience working with vibrant and bold color palettes. - Familiarity with the specific image formatting requirements of Telegram and Instagram. The final output that I will require is a digital file suitable for uploading as a profile pictur...
i have two pictures one with father and son one with mother and son would like to edit son out nad create just a father mother pic no son More details: What specific tasks do you need to be done in Photoshop? Image manipulation What is the primary goal of this image manipulation project? need to edit two pictures to make one What specific changes do you want to make to the two pictures to create one combined image? Combine elements from both pictures
I am looking for an experienced engineer who can take on firmware development spanning several wireless devices with Wi-Fi 6, Wi-Fi 7, and LTE 5G connectivity. We are looking for Embedded Engineers to join our team. What you will do: Design, develop, and refactor cloud connectivity apps for our CPEs (Customer Premises Equipment). Reproduce, isolate, and deb...Experience with an OpenWrt-based build system, preferably QSDK. Ability to read and write simple scripts in common languages such as Bash, Python, etc. Deep understanding of C and C++ programming for a Linux runtime environment. Nice to have: Experience with Quectel or other vendor LTE. Experience with DeviceTree. Experience with Wireless Technologies. Experience with Luci. Experience with I2C, GPIO, PWM. This is an ongoing...
I require a proficient freelancer to reformat and update my current resume. The details and data will be provided, and it should follow the suggested format: - Clean, modern design in a Word Document - Tailored specifically towards an Assistant Store Manager position in the Retail Industry - The final resume should be concise and not exceed one page Your job will be to structure my provided information in the most appealing and effective way possible, to increase my chances of success in the competitive Retail sector.
...expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong background in C...
Please edit the attached pic. - Move the pianist on the left closer to the band - Make the background look neater eg by removing chords - Send me a JPG file as a square - 250 by 250
...our area is called the Canadian Northern Flicker. What we do is apply a sturdy stucco cement coat that can withstand the repetitive pecking of the woodpecker. What we want: A fun (or serious) original woodpecker character to incorporate in our logo with the service label "Woodpecker Repairs and Proofing". It must blend in with our existing logo. Create a mockup with it on a 2021 F250 Ford van (pic is attached) for the HOOD, Sides and Rear with the company website and short number. ***Bonus points if a short catchy slogan is created! Do's and Don'ts -Be inspired by the CANADIAN Northern Flicker type of woodpecker. We do not want other types of woodpeckers in the logo. -Do not change the core logo (font and colour) but you may adjust it keeping the spirit a...
...adept at Intel PIC controller programming as we have some specific tasks to be tackled. The rundown of these tasks is: - Creating a sequence of outputs depending on incoming signals, focusing particularly on relay control - Monitoring temperature, controlling motor speed, and interfacing sensors - Working with digital and analog signals which would be provided as input to the controller You must have expertise in : - Intel PIC controller programming - Sensor interfacing - Motor speed control - Implementing temperature monitoring solutions A practical understanding of relay control will be an added advantage for this project. The task is somewhat challenging, but it's also an excellent opportunity for you to illustrate your competence and reliability in handling ...
...Make It" (I.I.W.I.I - B.W.Y.M.I), I need 5 Latin symbols for each of my 10 fingers, translating the initial letters. On the left hand, symbols for IIWII are placed from the pinky to the thumb, one symbol per knuckle. On the right hand, symbols for BWYMI are arranged from the thumb to the pinky, also one symbol per knuckle. Meaning 2 Design (4 tattoos – left hand knuckles only): I’ve attached a pic showing the Brail dot system that represent letters of the alphabet. I drew a box around the letters that translate to English. There are 4 Brial tattoos needed left hand fingers fingers to translate the first letters of the message: Physical, Emotional, Mental, Spiritual realms (P.E.M.S) On the left hand, starting with the pinky and beneath each Latin symbol for '...
I am in search of an illustrator with a knack for capturing the mystical and enchanting world of wolves. The project entails creating a cover for a wolf-themed fantasy book. I am looking for: - Mastery in creating book cover designs that are enchanting and hook readers instantly - Proficiency in using warm and earthy color tones - Ability to potray a world that feels mystical through design - E...Mastery in creating book cover designs that are enchanting and hook readers instantly - Proficiency in using warm and earthy color tones - Ability to potray a world that feels mystical through design - Experience with wolf-themed or nature-themed illustrations is a plus If you possess these skills and can bring this wolf fantasy alive, I can't wait to see your proposal. Something like atta...
I'm in need of a creative and experienced graphic designer to create a unique, vintage-themed logo for my submarine-themed restaurant. Logo can have pic of anchor/ light house/sea turtle. Name of the restaurant is SUBMARINE - For successful applications, kindly include your past work, specifically those that showcase your ability in creating vintage aesthetics. - Experience in restaurant or thematic design will be advantageous. - I envision a logo that not only captures the submarine theme but also speaks to the essence of vintage charm and sophistication. In conclusion, the key skills for this job include graphic design, experience with vintage aesthetics, and ideally, previous work in thematic or restaurant industries.
..."Rubbish", etc. The content should be various stills from classic British bands, i.e. Oasis, Coldplay, Blur, Verve, Stereophonics, Supergrass, Depeche Mode, Clash, Cure, Radiohead, Travis, Sex Pistols, Smiths, Echo and the Bunnymen, etc. These can be live shots and/or promotional. Each pic duration should only be about a second or two. The audio should correspond to each band and feature a 2-3 second sound byte of their biggest songs, i.e. Pic of Oasis/sound byte of chorus of live forever "Maybe I just wanna-", Pic of "Blur"/short clip of Song #2 - "Woo-hoo!" etc etc Include sfx of a radio dial changing the station between each audio clip, as if someone's going from station to station looking for a song.a The final c...
I am looking for a proficient engineer to develop a buck-boost converter model using MATLAB Simulink. The objective of this project is to use Circuit Averaging to create a model for buck-boost converter which can be controlled by PWM. Key Responsibilities: - Design and implement a buck-boost converter model using MATLAB Simulink. - Ensure that the model accurately represents voltage regulation. Required Skills & Experience: - Strong background in electrical engineering, particularly in power electronics and converters. - Proficiency in MATLAB Simulink for electrical circuit modelling and simulations. - A solid understanding of buck-boost converter principles, design, and applications. - Attention to detail and a strong emphasis on accuracy. - Ability to communicate complex ...
