Pwm software using pic工作

筛选

我最近的搜索
筛选:
预算
类型
项技能
语言
    工作状态
    3,260 pwm software using pic 找到的工作,价格在 USD

    我需要重修一个现有的网站。我已经有设计方案,我需要你为我的项目建立一个网站。

    $175 (Avg Bid)
    $175 平均报价
    12 竞标

    ...使用2个外部中断口来接增量型旋转编码器; 9. 蜂鸣器接口 使用一个PWM输出来控制蜂鸣器; 10. GPIO接口 至少预留出32个GPIO口用于外部设备的控制,如键盘输入,指示灯输出,三态安全开关输入,三档选择开关输入等; 基本驱动需求 1. 旋转编码器输入驱动 旋钮编码器驱动要求能判断编码器旋转方向,目前这两个GPIO口不给上层读取, 直接由驱动发送按键值,就是加入LINUX的输入事件,正向旋转发送键值59,反向旋转发送键值60,从event0读取。 2. RS485驱动 RS485需要1个方向控制脚,当向对应的UART发送接收数据时,方向脚能自动实现方向控制。 3. 蜂鸣器驱动 蜂鸣器驱动要求能设置PWM输出的频率,输出的时间,输出时间到了自动关闭PWM输出。 4. 薄膜按键驱动和USB键盘驱动 预留2

    $3308 (Avg Bid)
    $3308 平均报价
    3 竞标

    需要一位热衷 Arduino、电子设计的玩家创客帮忙介绍一个拇指般大小 32 位 Arduino 兼容开发板给中国的玩家. 这小小 38mmx18mm 的开发板功能含: 100MHz 32bit RISC / FPU + 1MByte Flash + 212KByte RAM + 2 UART + 2 SPI + 1 PWM + 17 GPIO + GPS 接收器. 售价 $12 (不含 GPS 有源天线). 性价比远超越在群众募资网站 Kickstart上能看到的任何 Arduino 相关开发板 (Digispark, Microduino, Tinyduino, Galago, Teensy 3.0...). 目标是 10 天内帮 NavSpark 活动增加 250 位中国区的支持赞助者

    $250 - $750
    $250 - $750
    0 竞标

    I need a fully functional hardware software prototype for an iOS audio receiver project. I have C Code available for Linux that needs work. Features: QCA7500 (ARM1156) based board iOS audio receiver Add i2c transceiver i2c auth chip TDA1540 DAC Build ALSA driver for serial TDA1540 DAC Discrete 44.1 kHz CPU OCXO clock, 0.5 ppm QCA7500 Homeplug powerline

    $1264 (Avg Bid)
    $1264 平均报价
    7 竞标

    Need PIC Programmer for MikroC for a Simple Code PWM for 3 Pins simple code for pic16 controller.

    $172 (Avg Bid)
    $172 平均报价
    28 竞标

    I have a raw pic of a singer to e edited professionally for magazine cover , instagram post and facebook post sizes (I need you to resize the pic) , and write few info on the pic (artist name, project name, and official website links) , in addition to background editing

    $25 (Avg Bid)
    $25 平均报价
    28 竞标

    Pic micro controller to measure 3 phase voltage and current measurement & control the relays based on current readings

    $14 / hr (Avg Bid)
    $14 / hr 平均报价
    11 竞标

    I need a fully functional hardware software prototype for an iOS audio receiver project. I have C Code available for Linux that needs work. Features: QCA7500 (ARM1156) based board iOS audio receiver Add i2c transceiver i2c auth chip Add i2s transceiver to get ALSA i2s output Discrete 44.1 kHz CPU OCXO clock, 0.5 ppm tied to i2s transceiver QCA7500

    $1913 (Avg Bid)
    $1913 平均报价
    9 竞标

    I'll provide you with a pic and high quality audio I need to create a music video, you'll have to do a waveform sync with beat (or moves nicely with the song ) in the background of the pic , or any lighting effect in the background, show me what you can do to look epic I'll upload the audio when we agree

    $162 (Avg Bid)
    $162 平均报价
    7 竞标

    Make sure you read it from top to bottom... "Urgently" need a "graphic designer." Price is fixed. You must be expert and creative. You need to prepare at least 20 posts per month for hotels/resorts/historical places. I am telling you again that my prices are fixed. If you have a team, you are most welcomed. Make sure you do it with creativity. If you do it great, you will get ...

    $58 (Avg Bid)
    $58 平均报价
    25 竞标
    $51919 平均报价
    11 竞标
    Dmx program for arduino 7 小时 left
    已验证

    I need a simple program for arduino that will take a dmx signal through usb or pwm pin and turn on output channels accordingly. Atmega 2560 or larger.

    $101 (Avg Bid)
    $101 平均报价
    10 竞标

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[登录来查看链接] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $22 / hr (Avg Bid)
    $22 / hr 平均报价
    1 竞标

    ...converter to Windows PC keystroke Hello Freelancers, I need an Arduino that will preform a keystroke in a Windows PC. From an outside source, I am receiving values in the digital PWM, these need to be converted into Fkeys. I would like assistance with this now please and am ready to start now. Please let me know if you have questions. Thanks

    $220 (Avg Bid)
    $220 平均报价
    9 竞标

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[登录来查看链接] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 平均报价
    10 竞标

    change app pic from yellow cab of lake norman to yellow cab nc !

    $12 (Avg Bid)
    $12 平均报价
    5 竞标
    Pic editing 已经结束 left

    220 pulsar pic editing. It looks beautiful. Its colour must be change. And nature colour also changed.

    $274 (Avg Bid)
    $274 平均报价
    29 竞标

    Smooth out feet and legs. even out toes

    $18 (Avg Bid)
    $18 平均报价
    14 竞标
    Photoshop of a pic 已经结束 left

    Photoshop of a picture. Cut the image from one pic and add it in another one.

    $19 (Avg Bid)
    $19 平均报价
    45 竞标

    ONE WAY MESSENGER FOR MOBILE PHONES. The application consist of sending real time messages and pictures from desktop to subscribers mobile phones (Android & IOS). The messages sent are for different categories and the subscribers have to choose which categories they want to subscribe so they will receive only the messages related to those categories. Subscribers are required to register to get...

    $562 (Avg Bid)
    $562 平均报价
    9 竞标

    I m Doss , i would like display video on two module p5 using pic for exemple 18f6722 ,

    $10 - $30
    $10 - $30
    0 竞标

    ...the respective relays and set the correct speed of the components (generate a PWM signal for the pump). All the components (pump/motors) have external drivers (no motor drivers are needed on board). Simply choose the right components (pluggable terminal blocks, relays, PWM generator), and build it....

    $732 (Avg Bid)
    $732 平均报价
    25 竞标

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $235 (Avg Bid)
    $235 平均报价
    15 竞标

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $292 (Avg Bid)
    $292 平均报价
    14 竞标
    Snap a pic from gallery 已经结束 left

    We curate art online for men and women who are in prison ([登录来查看链接]). We get checks that go to a mailing agent and that agent scans to email...so we never have a physical copy of our checks. We use the ingo app to cash our checks but it prompts the camera app on our device to take a picture of a check that we have in hand. That won't work. What we need (I think) is a camera app that, whe...

    $494 (Avg Bid)
    $494 平均报价
    23 竞标
    pic Controller 已经结束 left

    Need someone who have worked on pic12f675

    $29 (Avg Bid)
    $29 平均报价
    5 竞标

    I have a picture of my product. I don't like the name of the manufacturer of the case on it. So I need that just blended out using the colour around it. I also need some writing (around 17 letters) placed on the side of the box

    $45 (Avg Bid)
    $45 平均报价
    24 竞标

    ...default windows HID Gamepad driver should work. I should be able to control minimum of 2 Axis, 8 Buttons and 2 motors (for steering). Force feedback signals have to be used for PWM control of a DC motor. Directinput and USB HID protocol should be used. I will need all files to program and modify any number of arduinos. Original source of all files. Arduino

    $995 (Avg Bid)
    $995 平均报价
    10 竞标
    Convert pic to graphic 已经结束 left

    I need some graphic [登录来查看链接] avatar

    $24 (Avg Bid)
    $24 平均报价
    21 竞标

    i have this website with regular menu i need to make it like the menu in this website: http://talents123.ca. on hover the icon moves, dropdown same color as the icon ... want it multicolor. same as the menu in the link above. only serious and know php and css....

    $22 (Avg Bid)
    $22 平均报价
    18 竞标

    The proposed design is to use the Picaxe 08M2. The chip is to operate two timer functions. 1. Using a keyswitch input it generates a pulse output depending which way the key switch is turned (when turned on it outputs a high signal for 2.5sec, when turned off it outputs a high signal for 6sec). 2. When an input goes high, it resets a 24hr timer.

    $5 / hr (Avg Bid)
    $5 / hr 平均报价
    4 竞标

    Hardware and Firmware Design for IGBT Control application Key skills required 1. Electronic Schematic Hardware Design 2. Firmware for ESP32 3. High Accuracy ADC setup and use 4. PWM control No PCB layout design is required. Basic high-level flow charts will be provided for firmware functions. More information will be provided when you express interest

    $423 (Avg Bid)
    $423 平均报价
    17 竞标

    I have a code which is using PIC controller and I want to taje the design to Open CPU using SIMCOM or Qualcom module which support Open CPU modem. I am looking for someone who has done similar work before and can undertake the same. The project is for a GPS tracker. We can undertake one project and if its succesful undertake the second one after

    $384 (Avg Bid)
    $384 平均报价
    4 竞标

    I have a product which was using PIC24 controller and now I have designed a hardware for STM controller with almost similar interfaces. I want someone to port the code for STM controller and check the working on new hardware design The code is written in C and developer who has done says it can ported easily Need to have STM development kit so you

    $221 (Avg Bid)
    $221 平均报价
    10 竞标
    Trophy icon Youtube Profile Pic and Banner 已经结束 left

    I am looking for a profile pic and banner for my youtube channel "Birdie Boys". We are a disc golf channel so we absolutely need disc golf incorporated into the logo. In disc golf a birdie is a really good shot. So representing a "birdie", if we can incorporate a bird possibly. I am ready to see what you come up with

    $10 (Avg Bid)
    担保
    $10
    30 作品

    I need to implement a POC project for motor control project. For now, I need PWM and ADC implementation using NXP part, imxrt1050. You must know very well ARM 7 and used Keil as a development environment

    $45 (Avg Bid)
    $45 平均报价
    3 竞标
    photoshop on pic 已经结束 left

    photoshop on pictures for lighting

    $16 (Avg Bid)
    $16 平均报价
    24 竞标
    Project for Jorge P. 已经结束 left

    Hi Jorge! I'd like to start working with you on an Arduino project; I need to be able to read up to 7 fan RPM sensors, and send a few PWM signals to control those fans at the same time. I'm not sure which Arduino to get that can handle the necessary number of interrupts and want to keep it cost-effective if I were to scale this project (i.e. I know

    $28 / hr (Avg Bid)
    $28 / hr 平均报价
    1 竞标

    Add AC Variable Speed Drive Controller to existing Arduino code. Functions Required: Clockwise and Counter Clockwise movement. Pwm Braking Driver Protect

    $16 (Avg Bid)
    $16 平均报价
    3 竞标

    *** NEED THIS DONE WITHIN 3 HOURS *** Hello please design 3 properly dimensioned facebook pieces. Very simple Follow word doc instructions and check out the website listed there.

    $40 (Avg Bid)
    $40
    26 作品

    ...improvements can be made to it : 1. improve target distance calculations and <>= signs. 2., improve pwm and braking between direction changes to protect driver 3. improve Serial and Sensors read/write accuracy. 4. Add wireless functionality using node mcu 5. Add 2 limit switches 6. add custom delay in seconds between movements 7. Add serial monitor

    $36 (Avg Bid)
    $36 平均报价
    8 竞标
    Circuit design 已经结束 left

    Hi.. I need to design a 9vdc to 110vac inverter .. using simple circuits .. I don't want to use 555 timer .. I have 3.3v pwm output signal from Esp8266 module ..using that signal I want to design the inverter

    $11 (Avg Bid)
    $11 平均报价
    1 竞标

    Hi I want to make a circuit to drive a 50amps Dc motor from arduino. Thanks you

    $25 (Avg Bid)
    $25 平均报价
    11 竞标

    I need to communicate with arduino using VISA read nand WRITE. I have alot of the code written. I just need someone to finish the communication so i can use PWM ports on ARDUINO using Visa read and WRITE

    $63 (Avg Bid)
    $63 平均报价
    23 竞标

    I need a logo designed for Instagram. I already have one I’d like copied but changed please. Thank you

    $25 (Avg Bid)
    $25 平均报价
    53 竞标

    Hi, We looking for a freelance who can program PIC controller to interface with android app. Develop Android app. PIC controller to logic solver for digital inputs and output relays. Analogue inputs.

    $2677 (Avg Bid)
    $2677 平均报价
    27 竞标

    I'm creating a youtube channel devoted to beer enthusiasm and gaming. We can discuss designs once I've seen some of your work. The last time I posted this project I received too many bids far too fast which led me to believe that this may not be getting read. Add your favorite beer at the bottom of your bid. Thanks,

    $24 (Avg Bid)
    $24 平均报价
    33 竞标

    A freelancer has to build a program based on PIC, that automatically manages the data flow direction of the RS-485 serial port from RS-232, taking into account the baud rate and the number of bits, without any special configuration or software command, i.e, totally transparent to the MCU. It must be 100% compatible with Modbus! Freelancer has to deliver:

    $26 (Avg Bid)
    $26 平均报价
    3 竞标

    must have experience in esp8266 and programming it

    $49 (Avg Bid)
    $49 平均报价
    8 竞标

    I am carrying out an 3 phase AC motor project. This project will contain 4 AC motors each with a VFD to control speed (frequency) and torque (voltage) via pwm input from a micro-controller (Arduino DUE). TASK: I need well commented arduino code and connection instructions (reference ports from arduino and VFD schematics) in a quick turnaround

    $162 (Avg Bid)
    $162 平均报价
    16 竞标