Simple adc matlab jobs

筛选

我最近的搜索
筛选:
预算
项技能
语言
    工作状态
    858 simple adc matlab 找到的工作,价格在 USD

    Hello I want to interface radio module CC110L with PIC32 micro controller. Also PIC32 take value from current sensor and Using ADC I need to convert value in digit and send it over radio module.

    $139 (Avg Bid)
    $139 \u5e73\u5747\u62a5\u4ef7
    9 竞标

    ...driver to manage the screen and the sc card. WIth 1 button: On/Off and a switch : Flash. The ESP8266 has to be also in charge of measuring the remaining battery using the ADC. If you think you can do it, start the bidding proposal with "ESP8266TFT". If you need more info or pictures of the existing (but discontinued hardware), do not hesitate to

    $1221 (Avg Bid)
    $1221 \u5e73\u5747\u62a5\u4ef7
    31 竞标

    ...need help creating modules based on references designs of DAC/ADC chips. I'm working on an audio based project and I've had much success with inexpensive DAC/ADC modules found on ebay. I've tested PCM5102A and PCM1808. However, the parts that I actually want to use don't have a simple module for sale. So I'd like to hire someone who can use Kicad

    $1220 (Avg Bid)
    $1220 \u5e73\u5747\u62a5\u4ef7
    25 竞标
    Firmware creation IoT Device 3 日 left
    已验证

    ...application • The sensor HUB, All three sensors interface with the SAMD20 Via independent I2C ports. • Power control • Buzzer control • Test LED control • Battery and charger ADC readings Bluetooth-BGM13P – Overview • The BGM13P is a BLE 5 compliant module with an Integrated 32-bit ARM Cortex-M4 core processor at 38.4MHz. Since the BGM13P is an ultra

    $1500 - $3000
    加封 保密协议
    $1500 - $3000
    8 竞标

    Create a custom Fritzing Part for the Omega2 ADC Expansion PCB. The focus is on the Breadboard model - it must have all connectors correctly placed on a graphic of the PCB. It does not have to include all of the details of the schematic - can be treated as a blackbox. Adobe Illustrator Diagram of PCB will be provided.

    $28 (Avg Bid)
    $28 \u5e73\u5747\u62a5\u4ef7
    5 竞标

    ...images with the same [login to view URL] The images links will be the same but must start by [login to view URL] instead of [login to view URL] EVERYWHERE The image SRC must start by [login to view URL] instead of http://img.most-famous-paintings

    $179 (Avg Bid)
    $179 \u5e73\u5747\u62a5\u4ef7
    23 竞标

    ...images with the same [login to view URL] The images links will be the same but must start by [login to view URL] instead of [login to view URL] The image SRC must start by [login to view URL] instead of http://img.most-famous-paintings

    $174 (Avg Bid)
    $174 \u5e73\u5747\u62a5\u4ef7
    12 竞标
    Xmega micro controller 已经结束 left

    I'm a student who want to do a project to connect Arduino Yun to Atmel XMEGA A1U Micro-controller through SPI. XMEGA A1U Micro-controller will be connected to ... Arduino is through one SPI port only. - use I2C to pass command through DAC ( DAC output varies from 0.2 V to 2.6 V in steps of 0.1 V) - use I2C to pass command through ADC ( 00/01/10/11)

    $482 (Avg Bid)
    $482 \u5e73\u5747\u62a5\u4ef7
    22 竞标

    ...help me make a bid MY FPGA board is DEO nano SOC CYCLONE 5 1. reading an anolog signal (adc is available on board )ltc2308 is the adc which is available on fpga a board 2. realization of PID controller on FPGA 3. realization of process module on fpga (simple equation as to be realized here i.e PT1 transfer function) 4. output of pid controller should

    $366 (Avg Bid)
    $366 \u5e73\u5747\u62a5\u4ef7
    2 竞标

    ...help me make a bid MY FPGA board is DEO nano SOC CYCLONE 5 1. reading an anolog signal (adc is available on board )ltc2308 is the adc which is available on fpga a board 2. realization of PID controller on FPGA 3. realization of process module on fpga (simple equation as to be realized here i.e PT1 transfer function) 4. output of pid controller should

    $58 - $140 / hr
    $58 - $140 / hr
    0 竞标

    ...house. From 00:00 at night, the daily electricity usage KW information will be sent to the server via MQTT communication protocol. - In the event of a power cut, the input ADC will provide super condensate energy to be read and the existing KW information will be saved in the EEPROM until the condenser is discharged. If there is KW information stored

    $220 (Avg Bid)
    $220 \u5e73\u5747\u62a5\u4ef7
    10 竞标

    i will explain in brief when we discuss

    $16 / hr (Avg Bid)
    $16 / hr \u5e73\u5747\u62a5\u4ef7
    12 竞标

    ...Wake up and sleep on interruption Start your message with the text Truck Project PCB so I know you read the whole description 2 x UART comm 6 x GPIO control 2 x GPIO read 5 ADC read 2 x User button read Control 0.96" OLED I2C LCD (write code considering special characters, not only the libraries available) Navigation menu using the 2 user buttons I

    $140 (Avg Bid)
    $140 \u5e73\u5747\u62a5\u4ef7
    10 竞标

    Hello, I have made a SAR 8 bits binairy coded ADC using method of 2 steps Successive Approximation, but it is a bit buggy. I need very experienced engineer in this field, otherwise it would just be loosing time. The simulation must be done in Cadence Virtuoso 6.x Thanks !

    $40 (Avg Bid)
    $40 \u5e73\u5747\u62a5\u4ef7
    2 竞标
    Atmel Code for RFID units 已经结束 left

    ...#define MOTOR_START_HALF_MS 40 /*! brief Timeout to wait for lock-pin to change from output to input (in microseconds) */ #define LOCK_PIN_CHANGE_TIMEOUT 10 /*! ADC to measure voltage on VCC */ #define MY_ADC (&ADCA) static volatile bool_t adc_running = false; static volatile bool_t adc_vcc_low = false; /*! brief This variable is set

    $591 (Avg Bid)
    $591 \u5e73\u5747\u62a5\u4ef7
    9 竞标

    I need to design and simulate a typical telecommunication receiver system operating in Ku band(14.25 to 14.5 ...to design and simulate a typical telecommunication receiver system operating in Ku band(14.25 to 14.5 Ghz) consisting of Bandpass filter,Low ,noise amplifier,mixer,IF filter,adc and signal processor..with modulated and unmodulated signals.

    $126 (Avg Bid)
    $126 \u5e73\u5747\u62a5\u4ef7
    11 竞标
    telecommunication project 已经结束 left

    I need to design and simulate a typical telecommunication receiver system operating in Ku band(14.25 to 14.5 ...to design and simulate a typical telecommunication receiver system operating in Ku band(14.25 to 14.5 Ghz) consisting of Bandpass filter,Low ,noise amplifier,mixer,IF filter,adc and signal processor..with modulated and unmodulated signals.

    $189 (Avg Bid)
    $189 \u5e73\u5747\u62a5\u4ef7
    8 竞标

    ... Each RC chip outputs I and Q signals (6 total) with are sent to an amplifier (hence 6 amplifiers circuits). The output of the 6 amplifiers will go into 3 dual ADC's. The ADC will then send signal to connectors will an FPGA card will plug into. There is a signal from the FPGA that is sent to a DAC. I am basically designing a IO carrier board based

    $3505 (Avg Bid)
    $3505 \u5e73\u5747\u62a5\u4ef7
    6 竞标

    ...Bluetooth Printer. All the process is controlled by a keypad and observed on a 16 x 2 LCD. Tasks completed till date, Interface of USB, SD Card, 16 x 2 LCD, 4 x 5 Hex Keypad, ADC and Relays has been done. Schematic design and PCB has been done and tested for a basic moisture reading accurately. Software framework for the menu flow has been done using

    $518 (Avg Bid)
    $518 \u5e73\u5747\u62a5\u4ef7
    14 竞标

    ...written to configure a 24bit ADC using the attached information. The configuration routine should be triggered by the PIC receiving a single unique asci character. This will be used to configure and test data acquisition from a sensor. The configuration settings are written in the attached scanned document. A copy of the ADC data sheet is included for

    $167 (Avg Bid)
    $167 \u5e73\u5747\u62a5\u4ef7
    11 竞标
    write firmware for STM32F030 已经结束 left
    已验证

    The bidder is need to write firmware for STM32F030 using keil and STM32CubeMX to interface with relays, inputs, ADC, read analog input and SPI communication. All data will be managed through interrupts. The job must be done using : - STM32CubeMx. - Keil.

    $52 (Avg Bid)
    $52 \u5e73\u5747\u62a5\u4ef7
    9 竞标

    We are looking for a Hardware Designer who can design an interface card that will convert a sensor output to an ADC input. the DAQ card has 8 inputs with ±1 V input range. Our 3 sensors need to be read by this DAQ and we need an inerface cards (like a preamp) compatible with the DAQ. one sensor has [±10 V] output with 0Hz-3000Hz bandwith one sensor

    $211 (Avg Bid)
    $211 \u5e73\u5747\u62a5\u4ef7
    6 竞标
    3D Maya Logo 已经结束 left

    Heres my logo concept I need done in 3D Maya.... The whole logo is in flower lett...playing the SOS sound last SEE can stick out like a subtle nuance with different shaded flowers Let me know what you THINK :) AccidentSOS L A A N (Dent Sound) SOS Sound (ADC working on that) Y S S F S E E I ( S Y Y N A I T Y

    $294 (Avg Bid)
    $294 \u5e73\u5747\u62a5\u4ef7
    27 竞标

    ...down voltage from 18VDC to 12DC I have used DC-DC convertor . Xp Power Model JCM3012S12 . But i am getting excess Ripple which is effecting Voltage OpAmp Voltage inputs to ADC. I need Help With design of a Noise Ripple Filter to remove this Noise . This Can be in Hardware filter or Software filter ie DSP or Both . I dont expect the freelancer

    $122 (Avg Bid)
    $122 \u5e73\u5747\u62a5\u4ef7
    7 竞标

    ...least 10 seconds and proceed to Step 10. 10. LCD: Prompt the user to adjust the Variable Resistor to and to press PH0 to select the appropriate alarm level between 7E and BD. a. ADC/Potentiometer: As the variable resistor is being adjusted display the Hexadecimal value on the 7-Segment Display b. When PH0 is pressed check for a valid value. i. LCD: If

    $10 - $30
    $10 - $30
    0 竞标

    I would like to read ADC values on atmega328P and send it over Sigfox network, then put it in deep sleep mode with lowest possible current draw (preferably less than 5uA) and wake it up every 15 minutes (timer0/1) to read again analog input which is connected to a pressure sensor (ADC in 10bit resolution), and send it again to Sigfox network. I have

    $55 (Avg Bid)
    $55 \u5e73\u5747\u62a5\u4ef7
    1 竞标

    ...mode with lowest possible current draw (preferably less than 5uA) and wake it up every 15 minutes (timer0/1) to read an analog input which is connected to a pressure sensor (ADC in 10bit resolution), and send it to Sigfox network. I have written the code for Arduino if it helps. Also, I can give some hints about Sigfox module if it's not working in your

    $18 / hr (Avg Bid)
    $18 / hr \u5e73\u5747\u62a5\u4ef7
    9 竞标

    ...seu evento, vc (que criou evento) consegue na aba “bate papo” convidar as pessoas que curtiram um evento para formar um grupo e conversar. Na parte SOS é so para a pessoa adc um telefone de “urgencia” e que quando ela clicar no botao sos ligar para o telefobe direto ou enviar um mensagem com a localização. A aba do citamobi é exate...

    $378 (Avg Bid)
    $378 \u5e73\u5747\u62a5\u4ef7
    23 竞标
    ESP32 Lora Shields 已经结束 left

    ...schematics as a reference: - TB6612FNG: [login to view URL] - ADS1015: [login to view URL] - LM2596: [login to view URL] Both PCB must be squared shaped the smallest size possible with 4 bolt (M4) holes on each corner. Neither should

    $539 (Avg Bid)
    $539 \u5e73\u5747\u62a5\u4ef7
    19 竞标

    Medidor de energía con Micro ARM Cortex LPC1769. Medición de tensión y Corriente ya calibrada. Manejo de Display 4 segmentos , ADC de entrada de sensores, Salidas LED, comunicación vía puerto serie. Se requiere programación en C del micro propuesto. Código base en un 85% funcional. Falta el ajuste del otro 15%.

    $254 (Avg Bid)
    $254 \u5e73\u5747\u62a5\u4ef7
    7 竞标
    fpga soft radio 已经结束 left

    ...ADS5522 too. This is the ADC. I already have a not-completed project written in vhdl including modules parts of this project. I need you to simulate and fix the data transmission part between the client application to the ADC/DAC. The FPGA is a Xilinx XC3S500E. I need you to implement the architecture [login to view URL] and adapt ADC/DAC/FIFO controllers, and

    $381 (Avg Bid)
    $381 \u5e73\u5747\u62a5\u4ef7
    4 竞标

    Hi, This project is for a team of VHDL expert and Java expert. I have a dev. FPG...through UART. The client app should be able to generate and emit signal(waveform) through UART. You have worked with signal acquisition and processing in FPGA with high speed ADC and DAC. You know VHDL coding. You already work with Java language and know Swing lib.

    $199 (Avg Bid)
    $199 \u5e73\u5747\u62a5\u4ef7
    8 竞标

    We require a simple oscilloscope project to be implemented using only Verilog code on DE1-SoC board by the latest date of 7th of May as agreed during the chat conversation. This project will comprise of modular Verilog code, fully commented, test-benches for verification and a technical report of the project. Altera Quartus software will be used for

    $210 (Avg Bid)
    $210 \u5e73\u5747\u62a5\u4ef7
    1 竞标

    We need you to develop some software for me. We have made a device that is able to find the veins location. There’a a raspberry Pi- MCP3008 (ADC convertor)-wires-Bluetooth dongle-Heartbeat sensor. the device was working perfectly but somtheing happened after making the prototype. the memory that contains the program has affected. before it suppose

    $189 (Avg Bid)
    $189 \u5e73\u5747\u62a5\u4ef7
    6 竞标

    We need you to develop some software for me. We have made a device that is able to find the veins location. There’a a raspberry Pi- MCP3008 (ADC convertor)-wires-Bluetooth dongle-Heartbeat sensor. the device was working perfectly but somtheing happened after making the prototype. the memory that contains the program has affected. before it suppose

    $10 - $30
    $10 - $30
    0 竞标
    Trophy icon design a logo 已经结束 left

    business type: industrial, mold and tooling, die casting, machining. My company name is ADC ABSOLUTE DIE CASTING COMPANY.

    $110 (Avg Bid)
    担保
    $110 \u5e73\u5747\u62a5\u4ef7
    66 作品
    ADS7952 ADC 已经结束 left

    ...ADS7952 ADC with a Raspberry Pi. There are no libraries available for the ADC so it's making my task very difficult because I also do not have the ADC on hand as I'm working remotely with others. I found a driver for the ADC but it is in C language and I would like it in Python. I have no useful experience with coding to complete this task. The ADC h...

    $525 (Avg Bid)
    $525 \u5e73\u5747\u62a5\u4ef7
    21 竞标
    Arduino Coding 已经结束 left

    Two push buttons are in a row (A,B) when A is pressed and then B is pressed, Count Up ...Mode, i can turn ON OFF an LED with Swith1, but LED is could NOT be turned on/off according to ADC sensor. (Disabled) In the Automatic Mode, i can Not turn ON OFF an LED with Switch 1, (Disabled) but LED is gonna be turned on/off according to ADC sensor.

    $45 (Avg Bid)
    $45 \u5e73\u5747\u62a5\u4ef7
    8 竞标

    ...[login to view URL] Two differential signals (four electrodes) are collected from the plant's leafs. The signals goes to a raspberry pi by a ads1115 16-bit adc. The goal is that the plant, as far as it is possible, control the motor actuators (robot legs). I want a machine learning/ann solution to interpret the signals and choose

    $430 (Avg Bid)
    $430 \u5e73\u5747\u62a5\u4ef7
    21 竞标

    This project aims at con...the payload and header, decoding channel in real time... This library will primarily be tested with BeagleSDR as receiver and as transmitter. There are both AVR, FPGA, SDRAM, ADC and DAC inside BeagleSDR. You would be provided a sample of BeagleSDR board, however you need Beagleboard-x15 to start working in this project.

    $1053 (Avg Bid)
    $1053 \u5e73\u5747\u62a5\u4ef7
    5 竞标

    ...le  1 ‐ Short summary of each function  , Flowchart for main() function  Flowchart for ADC_read() function , Utilise the Call Graph facility in MPLAB X  2 ‐ Package the ADC functions into a library   ...

    $462 (Avg Bid)
    $462 \u5e73\u5747\u62a5\u4ef7
    3 竞标

    ...tor-Module-For-Arduino/352320438391?hash=item5207ef4077:g:g5MAAOSwjI5awgot ) Example of analog to digital converter ( [login to view URL]:g:fyMAAOSwjUVatcS3 ) Example of relay ( [login to view URL]

    $392 (Avg Bid)
    $392 \u5e73\u5747\u62a5\u4ef7
    13 竞标
    VHDL digital lock 已经结束 left

    ...to me how it was done and to show me that the program is running (simulation). I have attached a file of the description and the board I will be using, it has and integrated ADC chip that will need to be used in the program. Basically its building a program for a digital lock using 3 2-digit codes and downloading this program to the board for testing

    $147 (Avg Bid)
    $147 \u5e73\u5747\u62a5\u4ef7
    17 竞标

    ...significant re-design of the boards themselves. Ideally, the successful candidate would also be able to re-write the FPGA firmware to accommodate a faster ADC chip. We are currently using an 80 MSPS 14 bit ADC (AD9245BCPZ-80), which is the fastest in that specific form factor. Ideally, we would like to go as high as 180 MSPS whilst keeping the board the same

    $36 / hr (Avg Bid)
    $36 / hr \u5e73\u5747\u62a5\u4ef7
    10 竞标
    vhdl project using adc 已经结束 left

    I need a vhdl project using adc done.

    $149 (Avg Bid)
    $149 \u5e73\u5747\u62a5\u4ef7
    3 竞标

    Hello I need someone via TeamViewer develop an extremely small psoc ble application. I have a 4248 psoc ble Functions needed Alove connecti...Functions needed Alove connection from mobile phone When asked return a text string to mobile device Deep sleep Button to start from deep sleep Led show if bt connected ADC read battery ADC X 4 read others

    $20 (Avg Bid)
    $20 \u5e73\u5747\u62a5\u4ef7
    1 竞标

    10Hz Butterworth LPF filter interfacing a ADXL203 Accelerometer.

    $188 (Avg Bid)
    $188 \u5e73\u5747\u62a5\u4ef7
    3 竞标

    ...could maximize their production as well as monitoring and control the value of PH and EC values in irrigated water with suitable nutrition. The system comprises of sensors, ADC, microcontroller and actuators. When any of the above mentioned climatic parameters cross a safety threshold which has to be maintained to protect the crops. • A greenhouse

    $545 (Avg Bid)
    $545 \u5e73\u5747\u62a5\u4ef7
    11 竞标

    WE NEED WEIGHING SCALE PCB BASED ON 24 BIT XM24L AND XM24S ADC AND 8 BIT MICROCONTROLLER 1.ADC- HX 710A AND XM24L AND XM24S 24 BIT ADC 2.MICROCONTROLLER- NUVATONE 76NE003 OR ANY 20 PIN MCU IF CHEAPER IN PRICE [login to view URL] 7 SEGMENT 6 DIGIT COMMON ANODE DRIVER .

    $483 (Avg Bid)
    $483 \u5e73\u5747\u62a5\u4ef7
    6 竞标

    You should show what the fina...screen and the cursors information parts. You may compare the ADC and DAC as discussed in Lab #3. You need to compare the original signal and the reconstructed signal. Discussion: Discuss about the bandwidth of TDM-PCM Discuss about the effect of sampling rate and the precision of the ADC. Conclusion References

    $155 (Avg Bid)
    $155 \u5e73\u5747\u62a5\u4ef7
    1 竞标