Thermal printer interface with microcontroller工作

筛选

我最近的搜索
筛选:
预算
键入
项技能
语言
    工作状态
    9,312 thermal printer interface with microcontroller 找到的工作,价格在 USD

    Need help in a C project which requires Teensy microcontroller knowledge

    $87 (Avg Bid)
    $87 平均报价
    8 竞标

    A microcontroller with weight sensor to measure a weight setpoint. If object is heavier than setpoint, a signal will send out to turn off the switch and motor will stop . There must be a casing with digital indicator to show the weight. The project ideally should be made in Singapore .

    $393 (Avg Bid)
    $393 平均报价
    22 竞标
    Printer Commands 5 日 left
    已验证

    We have a POS application. We are lookin...application. We are looking for a developer that can write a library to print directly to the printer and also control the printer status. The printer support ESC/POS language and Transact PcOS emulation. We have 3 different tickets with barcode. Our idea is a library with a abstraction layer to the commands.

    $643 (Avg Bid)
    $643 平均报价
    5 竞标

    This is a small project, i am looking a quick resolution, you h...have to just use the Arduino debouce lib to connect 4 pins ( push buttons ) to the other 4 pins ( relay ) on a esp8266 microcontroller. i will share a quick demo as well. The push button should work even while the microcontroller is not connected to the internet. Protocol used ( MQTT )

    $20 (Avg Bid)
    $20 平均报价
    7 竞标

    This is a small project, i am looking a quick resolution, yo...you have to just use the Arduino debouce lib to connect 4 pins ( push buttons ) to the other 4 pins ( relay ) on a esp8266 microcontroller. i will share a quick demo as well. The push button should work even while the microcontroller is not connected to the internet. Protocol used ( MQTT )

    $16 (Avg Bid)
    $16 平均报价
    3 竞标

    I have printer blutooth (honeywell apex 3) I want printing web page (custom) From android device i need app andrid and source code . Thank you

    $47 (Avg Bid)
    $47 平均报价
    8 竞标
    Build me a microcontroller 5 日 left
    已验证

    Hello there, Thank you for your time. All I need is a micro controller hardware purpose built please. It is similar to an Orange Pi but I want this customised further with some specifications. Please, can you build us a sample and give us an appraisal or approximations in time and cost ? The hardware architecture requirement is attached in the file

    $611 (Avg Bid)
    $611 平均报价
    14 竞标

    I need you to write some content for a website.

    $13 (Avg Bid)
    $13 平均报价
    4 竞标

    I need a small run of a small plug that I have designed and have the CAD drawing for. I want them in nylon. I'm including the file

    $30 (Avg Bid)
    $30 平均报价
    13 竞标

    Need help to draw a very simple MPCB, but first i need to figure out some variants with thermal simulation! contact for more info

    $47 (Avg Bid)
    $47 平均报价
    9 竞标

    ...The device includes a micropump, microvalve and pressure sensor. Maximum pressure 60mmHg. Develop a PCB that will activate a micropump, and also a microvalve using a microcontroller to control the inflate and deflate cycles reading the pressure sensor. The PCB must use rechargeable battery charge controller to avoid battery issues. Microusb port to

    $682 (Avg Bid)
    $682 平均报价
    15 竞标

    We want to develop a printer device driver, that sends the content that about to be printed to a central server. This will be a windows device driver only, and will need some level of caching, since internet / network may not always be available. We should be able to configure the device driver to only send data that is of a particular size, and also

    $4993 (Avg Bid)
    $4993 平均报价
    2 竞标

    We need a 3D model of an Austin Mini car (see attached file) split into panels to print on a 3D printer with a print area of 1000x1000x500mm. This requires: - Resize model so that the width of the vehicle is 800mm. - Wheels must be removed. - Fuel caps, door handles, and bumpers must be split and provided as seperate STLs. - The body must be split

    $158 (Avg Bid)
    $158 平均报价
    15 竞标

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [login to view URL]

    $210 (Avg Bid)
    $210 平均报价
    5 竞标

    Want the coding to operate a windscreen wiper motor. Part list here [login to view URL] An intermittent wiper relay will also be needed video here [login to view URL] Will be using the front wiper motor from a 2012 Toyota Yaris and the switch from a 1998 Chrysler Sebring. Thank you Timeframe ASAP I also need detailed instruction on the process of putting this together

    $155 (Avg Bid)
    $155 平均报价
    4 竞标

    注册或者登录后来查看详情。

    加精

    I need one complete oscilloscope program similar this one DS212 scope: [login to view URL] this one DS212 scope: [login to view URL] The program must be: -MIKROC PIC32 COMPILLER; -USE PIC32MX MICROCONTROLLER; -USE TFT DRIVER ILI-9341 IN 8 BITS MODE.

    $186 (Avg Bid)
    $186 平均报价
    5 竞标

    I am looking for a pic microcontroller with a set of PCB boards. One board should have 5 digital inputs and the other board should have 5 Miniature Relays. Both boards communicate via 2 core cables to a distance of 1000 meters. Operating voltage of the boards to be 12 - 24 volt DC and power source can be arranged on both ends externally, not necessary

    $100 (Avg Bid)
    $100 平均报价
    1 竞标

    Hello, I need someone who has had experience calculating stuff like transmission ...someone who has had experience calculating stuff like transmission range, power consumption, path loss, etc for a report to be sent to the electronics department. The microcontroller we need to do the survey on is GPy: [login to view URL]

    $28 (Avg Bid)
    $28 平均报价
    5 竞标

    ...of the images. The project will potentially use either a Beaglebone Black or Raspberry Pie processor and will look something like this: Layer 1: BeagleBone Black to deal with the programming of the unit connected to Layer 2. This programming consists of: • Scheduling time lapse photos • Storing images on SSD • Controlling when the 4G unit connects

    $1822 (Avg Bid)
    $1822 平均报价
    9 竞标

    Who have done project with POS Restuarant + Android & iso + Kitchen Printer - Order from Smart phone or Tablet - Connect Wife Printer Front Desk and Kitchen Priner - Stock, Report, Accounting

    $1086 (Avg Bid)
    $1086 平均报价
    22 竞标

    Who have done project with POS Restuarant + Android & iso + Kitchen Printer - Order from Smart phone or Tablet - Connect Wife Printer Front Desk and Kitchen Priner - Stock, Report, Accounting [Removed by Freelancer.com Admin] We can talk about price,

    $1568 (Avg Bid)
    $1568 平均报价
    25 竞标
    DesignEngineer 1 日 left

    We Need Design Engineer For Thermal Design purpose. 1.Thermal Analytical with Auto CAD Designing.. 2. Mechanical Design Engineer Was Suitable for This Project .. [login to view URL] Need Auto CAD 3D Drawing, assemble and drafting. 4. Your Role Is Design with Chiller Circuit .

    $103 (Avg Bid)
    $103 平均报价
    23 竞标

    Hi All, I need a tutorial about the thermal analysis of POWER TRANSFORMERS in ANSYS Workbench that can help me learn the process step by step. The thermal and fluid flow analysis should be coupled with an electromagnetic model to perform the study. just like the below article: "Experimental validation of the coupled fluid flow, heat transfer and electromagnetic

    $58 (Avg Bid)
    $58 平均报价
    12 竞标

    For a Project we need to have app. 20 car parts files to print on a 3D printer. The car shall be a fictitious car but shall look like a model of a standard car used in the world Italien or French car. The 3D model must fit in thier size to each other and must represent a car (not a truck). The total size of the car is app. 30 cm and the delivery

    $222 (Avg Bid)
    $222 平均报价
    5 竞标
    setting up printer 14 小时 left

    setting up xerox3345 printer (scan, printing, faxing).

    $13 / hr (Avg Bid)
    $13 / hr 平均报价
    12 竞标
    IDE PORTING LPC4357 MICROCONTROLLER 11 小时 left
    已验证

    I need a project ported from IAR Embedded Workbench to MCUXpresso. The code should be able to be compiled without errors.

    $134 (Avg Bid)
    $134 平均报价
    10 竞标

    Hi Marek, I am looking for a pic microcontroller with a set of PCB boards. One board should have 5 digital inputs and the other board should have 5 Miniature Relays. Both boards communicate via 2 core cables to a distance of 1000 meters. Operating voltage of the boards to be 12 - 24 volt DC and power source can be arranged on both ends externally,

    $60 (Avg Bid)
    $60 平均报价
    1 竞标

    I need you to write a research article.

    $1517 (Avg Bid)
    $1517 平均报价
    20 竞标

    hello i need car parking control system with microcontroller PIC 16F874A or another controller with the Proteus Professionel V7.10 design and microC, with explain the code line by line. for more information post your offer.

    $86 (Avg Bid)
    $86 平均报价
    24 竞标

    Print Web site from Chrome in Android Phone via Bluetooth Printer

    $22 (Avg Bid)
    $22 平均报价
    4 竞标

    ***PLEASE READ THE PROJECT DESCRIPTION BEFORE POSTING A BID*** I need to print in 2 different trays of my printer. I have download 3 different samples to do it using Delphi. All of them works in a way I can make 1 change and that's it. All changes I made after that doesn't work - until I close the software and re-open. For example - if I change it

    $68 (Avg Bid)
    $68 平均报价
    7 竞标

    ...details from mysql and print it out using dotmatrix printer. The application should truncate existing mysql table to zero upon printing. Paper size is about half of A4. Design and source code must be editable just in case we need to change the layout. Preferably created using fastreport. I will provide you with mysql tables, data and sample of our invoice

    $43 (Avg Bid)
    $43 平均报价
    2 竞标

    ...details from mysql and print it out using dotmatrix printer. The application should truncate existing mysql table to zero upon printing. Paper size is about half of A4. Design and source code must be editable just in case we need to change the layout. Preferably created using fastreport. I will provide you with mysql tables, data and sample of our invoice

    $39 (Avg Bid)
    $39 平均报价
    1 竞标

    ...details from mysql and print it out using dotmatrix printer. The application should truncate existing mysql table to zero upon printing. Paper size is about half of A4. Design and source code must be editable just in case we need to change the layout. Preferably created using fastreport. I will provide you with mysql tables, data and sample of our invoice

    $7 - $21
    $7 - $21
    0 竞标
    DTG Printer needed 已经结束 left

    Looking for a few people experienced in working a DTG printer preferably a Ricoh/Anajet to do some freelance work in Atlanta GA area must have a car or reliable transportation.. Pay is negotiable based on experience and size of job.. Please Email me if interested DonnaSoublet@[login to view URL]

    $22 / hr (Avg Bid)
    $22 / hr 平均报价
    2 竞标

    Order Printer is an app developed by Shopify that allows you to edit its Template with code. I am using another app called BookThatApp that allows my customers to set up a picking up and return date. This information shows up in the Orders section of Shopify admin, but when I go to Order Printer the dates don't show up. I have managed to add some other

    $41 (Avg Bid)
    $41 平均报价
    7 竞标

    Please read text project. I use ST microcontroller STM32F103 and STP16CPC26XTR (16 channels led driver controller) The software can receive information via RS485 (serial port) and CAN BUS. You can receive 5 frames: Left Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows and

    $29 (Avg Bid)
    $29 平均报价
    5 竞标

    I want full working cordova plugin to handle printing from javascript for Bixolon printer, I will provide the Android SDK and samples

    $155 (Avg Bid)
    $155 平均报价
    2 竞标

    I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Hello word MCU (flashing firmware) Receive a serial port frames Send a serial port frames Receive a canbus frames Send

    $332 (Avg Bid)
    $332 平均报价
    4 竞标

    hi guys, i need a similar website to "[login to view URL]" i need the exact same cartridge database their are using. i need the same products. the design can be similar but no the same.. i also need this search function (see picture) i need it asap

    $534 (Avg Bid)
    $534 平均报价
    34 竞标

    ...all the sourcecode and SDK for java for android for my Thermal printer and also i have the serial port plugins for my app. I need some help to write the javascript interface for the printer on my adobe phonegap app (based on cordova). I belive there are two main stages. Stage one: get the printer to receive the order in Json format from the website

    $193 (Avg Bid)
    $193 平均报价
    9 竞标

    Hi, I need a person who can make g-code file for an electrode. I will provide you with the photo of an electrode and you can make its g-code file. $10 for the project. Thanks.

    $6 / hr (Avg Bid)
    $6 / hr 平均报价
    17 竞标

    I need a print service, ...app: [login to view URL] To me, all I need is: - Connect with the printer (Bluetooth Printer - Default) - Call intent functions to print from web Just one view: The same RawBT Printer 'Settings' view, that the user will configure the Bluetooth app, the paper size, etc.

    $198 (Avg Bid)
    $198 平均报价
    8 竞标

    ...for an arduino expert,who can design a wearable wrist smart band with multiple features , features are 2.5 inches screen , gsm anteena, temperature sensor, multiple microcontroller and sensors will work simultaneously. then create API of the product that will be interact with smartphone application and web services Also required design /modify

    $110 (Avg Bid)
    $110 平均报价
    3 竞标

    ...along with CloudFront, DynamoDB and Route 53 to deliver the websites. I am also thinking a Lambda function could be used to automatically print out the orders at the takeaway? In regards to SSL certificates, I believe AWS Certificate Manager would take of that requirement. Therefore I am looking for a freelancer who can build a website with similar

    $291 (Avg Bid)
    加精
    $291 平均报价
    14 竞标

    We need a developer who can design PCB and develop software using any microcontroller for Gas Analyser. It will contain 2 devices which has to be communicated over RS232. There will be 1 Output for 24 Column Printer and RS232 Data output for PC. It will contain 1 LCD of 64 X 128. It will have 6 Keys Input. Developers from India are preffered. Source

    $1123 (Avg Bid)
    $1123 平均报价
    27 竞标
    Design of PCB 已经结束 left

    Simple components comprising of the following: - Lithium Battery - Battery level monitor - Induction charging receiver - Microcontroller - Bluetooth transmitter - Temperature sensor - 9-axis motion sensor

    $446 (Avg Bid)
    $446 平均报价
    28 竞标

    Model Printer : V1 Mobile Handheld Smart POS Terminal with Printer , Model : pos v1-B18 Login 3 Level User 1 : only Sell Card , and Show balance per month User 2 : buy Card and import Card by Excel file to the data base , and view balance per User1 , and payment by cash and credit - Create Sub User for User1 : and Sell Card from Sub account User

    $91 (Avg Bid)
    $91 平均报价
    2 竞标

    Hello, I am looking to prototy... I am looking to prototype a fully customised 3D printer (both hardware and software). Specifically, I am looking to design and prototype a very fast (about 1000 mm/s), affordable (production costs The budget is negotiable since we're aiming to discuss the work scope in depth privately with the freelancers.

    $21278 (Avg Bid)
    加精 保密协议
    $21278 平均报价
    42 竞标