Using microcontroller project design工作

筛选

我最近的搜索
筛选项:
预算
类型
项技能
语言
    工作状态
    3,989 using microcontroller project design 搜到的工作,价格货币为 USD

    I need someone to help me design a digital-lock system using Assembly language and 8051 microcontroller.

    $24 (Avg Bid)
    $24 平均报价
    3 个竞标
    Assembly 8051 5 天 left

    I need someone to help me develop a project involving a 8051 microcontroller using Assembly language, as well as designing the circuit and PCB. I have a good part of the scheme and code from where to start so to someone with experience it shouldn’t take too long to complete it.

    $32 (Avg Bid)
    $32 平均报价
    11 个竞标

    want C programmer who can write an application for ADC and LAN combination. Take 12 channel ...programmer who can write an application for ADC and LAN combination. Take 12 channel input data from ADC, store it in one packet and send it over network via LAN port. Microcontroller: TI Tiva C series TM4C129 Note: hardware you have to manage on your own.

    $380 (Avg Bid)
    $380 平均报价
    7 个竞标

    ...Engineer (Contract for 6 months). Mandatory Skills: Strong C Programming skills. Good knowledge on firmware and device driver verification and Validation for DSP and Microcontroller platforms. Strong debugging skills with JTAG and boot-loader environments. Experience in bring up of peripherals like I2C, SPI, MMC, USB, Audio, Display, Video, Camera

    $350 (Avg Bid)
    $350 平均报价
    7 个竞标
    Embedded C 2 天 left

    Microcontroller programming PIC

    $145 (Avg Bid)
    $145 平均报价
    32 个竞标

    I have received the components and the PCB. I will assemble the different parts of the circuit and test their devices with very simple programs. Flashing test Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. Write the final program. I wi...

    $42 (Avg Bid)
    $42 平均报价
    9 个竞标

    Need to build a complex microcontroller for different wifi and network bands

    $1190 (Avg Bid)
    $1190 平均报价
    18 个竞标

    ...while designing/developing the product. • Should be an electronics kit simple to assemble. • Should be a plug and play type. Like interlocking, building block type. • No microcontroller based • Basic components like, LED, buzzer, ultrasonic, dc motor, photoresistor etc should be used. • You can use our own innovation and let us know. • PCB layout, schematic

    $64 (Avg Bid)
    $64 平均报价
    4 个竞标

    I Need project: RFID EM 125Khz IC reader ( common chinese rfid device) + HID 134Khz reader selectable Design Hardware frontend and Software in C using LPC1114 microcontroller No use module, need analog frontend ( amp op and LPC1114 and some discrete devices only) Firmware write in C

    $453 (Avg Bid)
    $453 平均报价
    7 个竞标

    Interface for Speed and Start/Stop Control over ethernet using a microcontroller. VFD to be used is a PowerFlex 70 from Allen-Bradley. Micrologix 1400 PLC controller to be used.

    $505 (Avg Bid)
    $505 平均报价
    11 个竞标

    The task is to use...and second being sleep. Additional modes might be added in the future, like MAG3110 magnetometer and temperature display (from NTC). The microcontroller is ATmega328p with Arduino Pro mini bootloader. The design has UART connection to Arduino IDE, which should serve to adjust the real time clock. Schematic is in the attachment.

    $187 (Avg Bid)
    $187 平均报价
    20 个竞标

    I need a 25x25 cm input panel board using common components such as 7 segment display, toggle switches/ dip switches, no microcontroller or programming required, just a simple board with elegant and managed wiring and connectors. Components must be installed such that they are easily replaceable if something shorts out. More details will be shared in

    $40 (Avg Bid)
    $40 平均报价
    6 个竞标
    Build me a Circuit 已经结束 left

    We need someone with knowledge of electronics to build a circuit at our facility in Wadala, Mumbai. Should be ready to work at our facility. Should have experience ...electronics to build a circuit at our facility in Wadala, Mumbai. Should be ready to work at our facility. Should have experience in building circuits and use of Arduino Microcontroller.

    $19 (Avg Bid)
    $19 平均报价
    10 个竞标

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will rep...

    $25 (Avg Bid)
    $25 平均报价
    2 个竞标

    I need a simple software for my pcb. It has a STM32F103 microcontroller. The first milestone is to test the hardware with a "hello world". I will assemble it by parts and testing with the software that you will send me. Then with those small programs we will create the final Basically, it receives data through the serial port or canbus and writes in

    $28 (Avg Bid)
    $28 平均报价
    23 个竞标
    Pcb design -- 1 已经结束 left

    I've a project to design a pcb which has 220V AC inputs (4), 24V DC inputs (4) 12V DC inputs(2) and digital outputs(4). I need one GSM module, sim card holder, SMA antenna, speaker and microphone pins on the board. Operating voltage of the board should be 24V DC. We can choose microcontroller together and talk in detail about the rest.

    $158 (Avg Bid)
    $158 平均报价
    9 个竞标
    Autonomous drone 已经结束 left

    I am looking for someone who can program an STM32F103 microcontroller as a flight controller for a quadcopter. Below are the various sensors it needs to interact with to produce relevant outputs: 1. MPU6050 or better 2.72-Channel U-Blox M8 Engine GPS Module [登录来查看链接] FS-i6 transmitter with IA6B Receiver [登录来查看链接] barometer 5. NRF24L01 wireless module

    $956 (Avg Bid)
    $956 平均报价
    13 个竞标
    Design a PSU controller 已经结束 left

    The task is to design a small PCB that controls the logic to interface to two power supply modules to manage their operation in a redundant configuration. Your job will be to design the interface PCB with a microcontroller that will perform the following actions: 1. The modules would plug into the board, provide a basic filter along with protection

    $451 (Avg Bid)
    $451 平均报价
    20 个竞标

    ...PIC1684A communication program in C is needed for the raspberry pi For programming the microcontroller, you are advised to use Microchip tools: the MPLab X development environment, accompanied by the XC8 compiler for the C language. Note: [for the end of the project] Hall A and B inputs may trigger interrupts for save resources (energy and computing time)

    $26 (Avg Bid)
    $26 平均报价
    2 个竞标

    ...PIC1684A communication program in C is needed for the raspberry pi For programming the microcontroller, you are advised to use Microchip tools: the MPLab X development environment, accompanied by the XC8 compiler for the C language. Note: [for the end of the project] Hall A and B inputs may trigger interrupts for save resources (energy and computing time)

    $24 (Avg Bid)
    $24 平均报价
    2 个竞标

    Your job will be to completely design a single PCB with a microcontroller (schematics, firmware, Gerbers, BOM) that will perform the following actions: 1. Read measurements from two sensor with I2C protocol 2. Use the readings to drive an AC motor as specified according to this application note AN308 by ST Microelectronics - TRIAC analog control

    $391 (Avg Bid)
    $391 平均报价
    27 个竞标

    I am using a PIC18F Microcontroller , I need a custom datalogger , so it can log all data and save it in eeprom on board, and that it can be accessable later with bluetooth,,

    $190 (Avg Bid)
    $190 平均报价
    12 个竞标

    Based on a functional prototype, I am looking for help to create a finalized version of the whole project and make all working together. Global principle and functions : In a stairs case : 2 PIR sensor (up and bottom position) a digital led strip ( WS2812B ) ligthing gradually dot after dot a stairs case in the travel way by a selected effect and

    $222 (Avg Bid)
    $222 平均报价
    18 个竞标

    I am looking for an Embedded C programmer for STM32 microcontroller. - Processor is ARM Cortex M4. - Project is to control and drive a Very High Current BLDC motor. - Software development in Keil MDK platform. Budget is less! So expecting suitable bid!

    $176 (Avg Bid)
    $176 平均报价
    19 个竞标

    ...on AWR1243. Following are the requirements of the design: 1. The field of view of the radar in the azimuthal and elevation plane should be Atleast 120 degrees. 3. The resolution in azimuthal and elevation plane should be less than 5 degrees. 4. The AWR1243 chips have to be connected to a microcontroller that is capable of UART to USB conversion and programming

    $592 (Avg Bid)
    $592 平均报价
    14 个竞标

    I am using a custom board which is based on a SAMD E17A Microcontroller. The Microcontroller is quite similar to the Arduino Zero Microcontroller. The task is to adjust the latest Arduino Zero Bootloader to my board.

    $28 (Avg Bid)
    $28 平均报价
    4 个竞标
    Microcontroller 已经结束 left

    I have knowledge about microcontrollers

    $100 (Avg Bid)
    $100 平均报价
    13 个竞标
    full sinewave ups 已经结束 left

    a full sine wave ups 600 watt, with lcd display of the battery level , the input voltage and the output vo...the input voltage and the output voltage . the ups has three output plugs, I can control each plug over wifi ( switch on and off), I want the complete design schematic , PCB design, microcontroller programming, BOM, and I will implement all .

    $23 / hr (Avg Bid)
    $23 / hr 平均报价
    2 个竞标
    Project for Vladimir K. 已经结束 left

    electrical engineering AutoCAD designer microcontroller

    $39 / hr (Avg Bid)
    $39 / hr 平均报价
    1 个竞标

    Microcontroller programin pic 12f675 12v DC Battery Charger circuit and free wear.

    $45 (Avg Bid)
    $45 平均报价
    10 个竞标

    IoT Embedded PCB design ready to be manufacturing with international requirements for Certifications like ROHS, CE, FCC etc. This PCB will be installed on IP67 Case and it will be used for continues water monitoring under external conditions. It will have: 2 sensors, 1 tft screen, 3 buttons, pycom microcontroller, power management for 14500 lithium

    $170 (Avg Bid)
    $170 平均报价
    10 个竞标

    I have a microcontroller that has software loaded on it. I need someone to duplicate the software and be able to load it onto the microcontrollers. The microcontroller has a USB port on the side of it as well as a micro SD card port but i believe the USB port is what will be used to load the software onto the microcontroller. I believe this is eeprom

    $4714 (Avg Bid)
    $4714 平均报价
    41 个竞标
    PCB design 已经结束 left

    Training to Hardware's system and board design with real microcontroller based design.

    $24 / hr (Avg Bid)
    $24 / hr 平均报价
    18 个竞标

    Looking for a hand on experience programmer who has worked on Microcontroller, raspberry pi with python programmer. I need to integrate my existing Microcontroller program with a payment gateway.

    $158 (Avg Bid)
    $158 平均报价
    17 个竞标

    Make the Yale-OpenHand-Workshop-2018 ROS control work with an Arbotix-m microcontroller and Dynamixel AX-12. By using the provided packages on GitHub and ros.org. [登录来查看链接] [登录来查看链接]

    $28 (Avg Bid)
    $28 平均报价
    2 个竞标

    Microcontroller based pcb programs, PCB Layout & Prototype development Work (we want only gujarat freelancer)

    $761 (Avg Bid)
    $761 平均报价
    13 个竞标

    The project has a few basic functions. 1. maintain a specific temperature 2. fire a signal to a solenoid valve in particular (adjustable) intervals. other basic functions like on off etc

    $194 (Avg Bid)
    $194 平均报价
    42 个竞标
    Project for David U. 已经结束 left

    I've seen your portfolio, I have a project for which I'm looking for a programmer's microcontroller, are you interested?

    $229 (Avg Bid)
    $229 平均报价
    1 个竞标
    Project for dsuclla88 已经结束 left

    I've seen your portfolio, I have a project for which I'm looking for a programmer's microcontroller, are you interested?

    $229 (Avg Bid)
    $229 平均报价
    1 个竞标

    ...fault detection system for a 32-bit AVR microcontroller. Starting from a configuration involving professional J-Link EDU equipment, we would check the White-box testing algorithm for the solar tracker by placing breakpoints and watch points inside the code to monitor changes in the registries. This was done using the Arduino Due platform SWD header. However

    $373 (Avg Bid)
    $373 平均报价
    8 个竞标

    ...electrical engineer to design a custom PCB layout according to requirements, choose components and BOM. Also required to create very simple program for the board. This is for social impact startup product : [登录来查看链接] Low-cost assistive smart glass for hearing impaired Requirements: 1. Choose suitable components and design PCB with following

    $151 (Avg Bid)
    $151 平均报价
    15 个竞标

    Industrial Digital temperature controller In this project I need schematic of digital temperature controller using microcontroller, I also need HEX file, C program file and electronics components details of this project. More project description as below… Control action=ON-OFF/PID Input details: 1 temperature sensor RTD (PT-100) [range -99 to 850]/

    $268 (Avg Bid)
    $268 平均报价
    9 个竞标

    Need to write code in Code Composer Studio (CCS) for interfacing Ultrasonic sensor (HC SR04) with MSP432 micro-controller. The working code should make the sensor detect an object and print the distance continuously. Someone in either Electrical or Computer Engineering should be able to understand this task.

    $139 (Avg Bid)
    $139 平均报价
    8 个竞标

    I require a new firmware for my GPS+ sensor device. The device uses a sim c...firmware for my GPS+ sensor device. The device uses a sim card and sends data via TCP/IP. The requirements are for a high-security firmware (TLS 1.2, secure boot, etc). the microcontroller used is stm32f103c8t6. More details about the requirements and hardware can be shared.

    $911 (Avg Bid)
    $911 平均报价
    19 个竞标

    ...and we want to have our own programming software online and offline. Our kits are Arduino compatible. Our dream is a website where you can code and upload it to the microcontroller. We'd like to have a login service where users could save their projects and share them with the community. Our programming software should be block based programming software

    $2764 (Avg Bid)
    $2764 平均报价
    59 个竞标

    ...assistive technology. This project pertains to our product - Braille Me which is a one-stop solution for visually impaired students for all their educational needs. We are looking to redesign the architecture of the device to enable new features and make the software more robust. The software would run on a high-end STM microcontroller. Find the attached

    $2228 (Avg Bid)
    $2228 平均报价
    4 个竞标

    I need a 8051 program for control 1fan speed + 5 AC appliances on/off by ir remot and bluetooth.

    $126 (Avg Bid)
    $126 平均报价
    14 个竞标

    A. WHAT WE HAVE: Present State of the Project: Our project proposes a hardware testing method oriented towards an AVR – 8 bit Microcontroller (Arduino Unit) that is involved in the automation process of a photovoltaic panel. The mixture between a traditional Bed-of-Nails tester, a Self-Testing code for GPIO (General Purpose Input Output) pins testing

    $452 (Avg Bid)
    $452 平均报价
    9 个竞标

    Simple Electronic Coding (Microcontroller) Develop an application for a setup that is capable of fetching data on a microcontroller which as a GSM network for communicating via 3g/4g packet data to web database where reading and data collected from the via connected sensors like temperature, ultrasonic and GPS sensor would be accessible via a simple

    $308 (Avg Bid)
    $308 平均报价
    14 个竞标