建筑结构 Jobs

I am currently working on a building project I am seeking a freelance designer who can help me improve upon the current layout that I have for my building. While I have created a preliminary layout, I believe that a professional designer like yourself could provide me with a more refined and polished design that would enhance the overall aesthetic and functionality of the building. I am looking for a modern and functional design that optimizes space and maximizes natural light. I would like to provide you with more details about the project and the current layout I have in place. I believe that your expertise and creative ideas would help me create a better design for the building. Thank you for considering my request,

I have measurements for each room of a single family home (approx 2100 sq ft) and I need them assembled into a working CAD floorplan

Necesito que me hagan un trabajo en autocad de un edificio de trata de plantas alzados y secciones con toda la información correspondiente

I own a pressure washing company, and we have been given the opportunity to bid on a large contract. The proposal is requiring site plans for water remediation for several properties, and I am hoping to get digital versions of my drawings. I think it would look more professional! I have attached 1 drawing to start. None of the measurements on this are to scale - it is just a rough representation of the parking garage. I would like for the flat levels to be the same color and the slanted level to be different from them, perhaps light colors. The lines for the parking spaces can be black, the French drains can be yellow with black lines, and the long slender drains behind the parking spaces can be orange with black circles representing the drain holes. The water capture circles can be...

I'm looking for someone to a design a medical office building. The building is roughly 2,200 square feet, and essentially a rectangal. Pictures and dimensions will be provided to the person hired. You must have knowledge of architecture, design, and be able to produce creative renderings. I will ask for samples and collegiate degrees during interviews. It's a small project and won't take an artist long.

Details of space 1 Master Bedroom - Upper floor 1 Toddler room - Upper floor 1 Guest bed - Lower floor 1 Living cum dining room - Lower floor 1 Office den - Lower floor 1 Bathroom - Upper floor Planning to paint most rooms Bone White. Looking for ideas on painting toddler and kitchen. Master bedroom will have a king bed. Guest bedroom will have a queen bed. We have some existing furniture - like the couch, chairs, desk that we will send pictures and dimensions to you. Design preference: 1. Minimalist 2. Natural 3. Eco-friendly 4. Baby friendly 5. Pet friendly

I have a picture of a bank and ** I need 16 x 16" designs for what it could be besides a bank, example, coffee shop, restaurant with the bar, top on the roof, fast food, restaurants, etc. ** Front drawing needed only **

I'm looking for an experienced 3D artist to create highly detailed and realistic interior and exterior renders of a residential villa. I have a sketch of the villa that I require the renders to be based on and need it to be of high quality at a sufficient resolution. The final renders will be used for marketing purposes and need to be of the highest caliber. The artist must demonstrate experience in creating similar renders and be comfortable with the use of advanced 3D tools and software. Please be prepared to present a portfolio of relevant projects. Project is due to be ready and delivered by the 15-20 April and would need to include the following: Plan view (basement, ground floor and terrace floor) Elevations of villa Interior Renders In addition to these, I wand a secon...

We need a Civil draftsman for making drawings for our project in BPCL Mumbai Refinery

Pole Barn at its bare minimum. I am looking to build a simple and basic pole barn. I want it for wedding venue. BUT ABSOLUTELY nothing elaborate. I just want 4 outside walls, open ceiling so you can see the beams, and then 2 bathrooms. So mainly its all floor. My county just requires an architect do the 2D drawings for my permits. I live in south carolina and the building would be around 34-3600sq ft. I need the drawings to be stamped by a USA architect licensed in SC. Sample attached!

Create a single story 150' x 100' Commercial Office Building for a technology oriented company that is aesthetically pleasing with a parking lot and landscaping. This will be used for a concept proposal to interested parties. It should be positioned on a 300' x 300' lot. Optionally include building signage a street sign with a company logo (attached). A 3d video of it would be an added bonus. If you want to place the building on the actual lot, it is located at 42.102456N, 91.696356W. A Google Earth kmz file has been attached.

Hello, i'm loking for someone to turn hand sketches and old drawings into a Revit model. this project is to test your abilities in revit and can you read my sketches correctly. Once I select winners, I will commission the entire project. I have 40 similar projects, so we will choose more than one winner.

Convert PDF Drawings to Auto Cad Context of Job the 1st floor and the 2nd floor will be on top of a new foundation. In a flood Zone Please design a footprint for this new foundation 9(Ground Level) which will be 12' Block walls . So now we will have 3 floors. See attached ground level layout. Create site plan in Auto Cad using attached survey and site plan draft

We are looking for an experienced AutoCAD draftsperson to create a construction sketch plan for a temporary pet boarding facility for dogs and cats. The facility will cater to pet owners who are on vacation or unavailable for a period. Project requirements: Proficient in AutoCAD and able to provide detailed and accurate drawings. Ability to understand and incorporate project specifications and requirements. Project scope: The pet boarding facility will be built on a 1-hectare plot of land. The design should include separate areas for dogs and cats, as well as common spaces for activities, feeding, and administration. The facility should incorporate outdoor play areas for dogs, indoor play areas for cats, and secure, comfortable accommodations for all pets. Consideration for proper venti...

Hello! My name is Swarn Shikha. I am from the Geown Casper Properties Pvt Ltd. HR team. We have a new opening for a freelancer Architect for our upcoming projects at the Bengaluru location. Candidates with a minimum of 5 years of experience are eligible. I am looking for a Freelancer Architect who can help me with a mid-size project. This project requires an experienced Freelancer Architect who can listen to our requirements and provide sound technical advice based on their experience. Please, do not hesitate to reach out if you have any questions.

Hello! My name is Swarn Shikha. I am from the Geown Casper Properties Pvt Ltd. HR team. We have a new opening for a freelancer Architect for our upcoming projects at the Bengaluru location. Candidates with a minimum of 5 years of experience are eligible.

- I have the basic shape of a swimming pool. I can provide in DWG or other formats. - The pool has a sunken lounge set into the side - I need help designing the floor of the pool (i.e. the depths) - I am hoping the design software can simulate water, so we can find a solution that minimises splash into the sunken lounge - The simulation feature must be mature and proven, because the pool is an organic shape - Thank you

Complete architectural plans for a beach front house in Texas.

Hello, I would like to work with Vision transformers expert. I want to train NIH CXR dataset on Vision transformers model only to detect lung tuberculosis.

Hi we’ve been asked to produce some technical drawings for fabrication by our client. We need detailed drawings of the attached please. Please can we get a quotation on works

Hello, My partner and I are building a place together and we would like to work with an interior designer to help us bring our dream home to life. The most important areas to me are the primary bedroom and bathroom, the walk-in closet, kitchen, kid's bathroom, sitting room and the pantry. For example, I'd love to have long closets along the walls for example in the library and offices for storage.

i need 8-10 pictures of a villa for advertising, it must be only the exterior.

Hello I am looking for someone to draw up an existing house in Chief Architect - see include layout drawings. The project will use metric units and is a 111sq.m two storey house. Chief Architect X10 is preferable Regards Noel Hughes

As a potential client, I am looking for a commercial architecture project with a specific design to be completed within 3-6 months. I have a design in mind, so I am looking for an experienced architect who can bring my vision to life. I am looking for someone who is creative and resourceful and can help me navigate through this project smoothly and efficiently. If you think you have the skills, knowledge and experience for this project, please feel free to contact me.

Quantity takeoff needed for a construction project, including electrical, plumbing, concrete, and everything else for the entire project. Material, labor, and other prices are not required at this time. Please provide a quote including: Information about similar work you have done in the past Your rate or flat fee An estimate of how long it will take you to finish Samples of your previous work Payment will occur in stages as each stage (electrical, plumbing, concrete) is finished.

I'm looking to have a Tiny House plan created. This plan should be solely architectural, as I'm not looking to have any customization done nor any interior design. The plan should be made with wood materials. This plan is going to be used to construct a single small house.

I have it drawn up, have all of the engineering calculations but need permit ready plans for a 1500 sq foot icf house in south Florida. Need it to be signed and sealed and permit ready .

I drew the attached plans for a basement remodel in my home. If I submit it as a single building permit because of the total cost the town requires an architect drawing. None of my contractors feel the need for them so my only goal is satisfy the town. Please let me know what else you would need to provide a quote. Must be New York State licensed Eric

I drew the attached plans for a basement remodel in my home. If I submit it as a single building permit because of the total cost the town requires an architect drawing. None of my contractors feel the need for them so my only goal is satisfy the town. Please let me know what else you would need to provide a quote. Eric 914-980-1160

We need Interior Designer for Home Construction in Delhi

I need to get a architectural portfolio of 12 pages to be done (A3 landscape)

I am looking for someone to help me custom-compile FFmpeg cross-platform so that I can have executables available for: win-x64 win-x86 linux-x64 linux-arm64 macos-x64 macos-arm64 Output must be a single-file executable for each platform. I want minimal file size only for muxing audio/video files, with everything else disabled. I experimented with it and compiled with the following options: > ./configure --disable-debug --disable-ffplay --disable-ffprobe --disable-doc --disable-encoders --disable-avdevice --disable-swscale --disable-postproc --disable-hwaccels --disable-protocols --disable-devices --disable-filters --disable-decoders --disable-pixelutils --disable-dct --disable-dwt --disable-lsp --disable-mdct --disable-rdft --disable-fft --disable-faan --disable-bsfs --disable-pro...

I want to get best design for my marriage palace building. I am attaching one very basis design, so based on areas and all I need very attractive design for my project. Only experience arch contact. Please note there is one more image is attached that shown full area of my land. 610 feet long and front is 187 feet wide and rear width is 198 feet. 1 Banquet Hall 110x80 2 Kitchen Shed 3 Kitchen Store 4 Store 5 Toilets 6 Office one number 7 Parking for 400 cars 8 Lawn - For open parties 9 Water Fountain 10 Swimming Pool 11 Ten Rooms with attached toilet

I need a stamped (state of VA) plan for a foundation for a small house. The footer and slab will be a monolithic slab on grade structure.

We have a 1.5 story house, and wish to convert it to a full two stories. It is in an R-5 district, which can go up to 40 feet, so zoning should not be an issue. We have an amazing contractor but need a structural review. Ideally the same person also has in house drafting and ability to file. Honestly, as the second floor will be one room, and as we know the design we want to do, more or less, we are not sure we need an architect as such.

I need the help of a very Good Structural engineer who can start work right away who knows how to do stuctural calculations with Staad and can produce an efficient report urgently

Hi, I m looking for someone to build the 3D Project based on the 2D drawing i have from my architect using sketchup. Once its done everytime we have a variation with our architect we will implement it. The house is ~ 2000sqf plus some terrace.

Need a colour, 3d mock up of a garden studio build to allow client to visualise different colour schemes of cladding. Attached ortho is the basic structure, allowance needs to be made for external battening and horizontal weatherboard cladding as well as a verandha and decking. Apertures to contain double upvc french doors to front with georgian glazing bars and windows the same style. Further dimensions and clarification provided to succesful applicant.

I am looking for an elevation designer to help with a project. The specific type of work is elevation of a entrance gate and sitout I do not have a particular style in mind and would appreciate the designer's advice to make the project perfect. The space to be designed is small at 500 sq. ft. or less. It is important for me to find a designer that has experience in these types of projects and can provide the best advice for the design.

I am in need of a skilled designer to create a detailed SketchUp design from provided DWG elevation and floor plan files. The project involves creating both exterior and interior 3-d views using SketchUp. The design should have detailed attention to measure, lines, and the character-building elements of the environment. I do have DWG files available, but only require a SketchUp design. I expect a model that is basic but with an added layer of realistic details. The project will be completed with an impactful and pleasing sense of depth, dimension, and layers. The right freelancer should have an eye for detail and an understanding of design principles.

Please could you provide a quote for detailed construction drawings of all aspects of the work involved i.e. drainage, foundations, framing etc. We are doing this post project completion to provide a framework for drawings for future projects. As I will be a repeat customer, should we come to an agreement, I’d hope for a competitive price. The attachments in this email show the frame drawings as well and an overview of the spec but happy to answer any questions. Time scale 5-7 days

Hello, Need someone who can design my office space and probably execute as per the designing. Its a garment manufacturing office, and need below inclusions - 1. My desk. 2. Sitting space for a designer, accountant and one more person. 3. Small conference table with a screen across it. 4. Small kitchen is already there. Sharing pictures, so someone can design and plan visit accordingly. Best Regards. Kartik 9818055574

I need some who can handle an architectural floor plan, external elevation and roof plan of a building.

I urgently need auto cad drawing from a layout and as per dimensions given in line diagram.

I am looking for an expert to design a new facade and create 4 elevations of all sides for a double storey house. The materials being used are brick and I need technical drawings as well. The new facade needs to be designed from scratch. Ideally, I want the design to be modern, stylish and customisable to my preferences. Please provide a detailed proposal indicating your experience and design portfolio. Looking forward to hearing from you.

A certified mep engineer is required for a project to be done of a 5 storey building. Plz only apply if you are a certified mep engineer

I'm looking for a skilled freelancer to design a dual cab ute tray using stainless steel. I need someone who can bring engineering and strong design principles to the task, and can guarantee the highest quality materials and build. In addition to the basic design of the tray, I'm looking for the freelancer to offer additional features to enhance the finished product, such as specialised brackets for tools, built-in storage systems, etc. I'm looking for a professional, innovative and reliable end product that meets all my needs, and I'm excited to see what ideas the freelancer can come up with.

Design an office, inventory storage and repair facility from: (1) 39' x 19' x 100' all weather shelter, specs attached (4) 53' HC shipping containers (1) 40' HC shipping container (1) 40' Standard shipping container (1) 20' Standard shipping container - can add containers if design calls for it - incorporate wooden timbers or whole log for supports - foundation based on 4.5" screw piles (50 on site, can add more if needed) ** all of the above are on site, redy to install - shop space minimum 3000 sqft, in slab hydronic heating - mechanincal room, off grid, CHP powered and cooling/heating augmented with heat pump - rooftop 7.5 to 10kW solar on flat or low pitch room above office/shop southward facing

As a project, I'm looking for an expert to sketch up a model of an existing building, create a data model in excel, and an IFC model. The model created must be accurate and detailed. The excel data model must be organized and comprehensive. Lastly, the IFC model will require all of the information compiled and put into a format such that it is both manageable and accessible to IFC. This expert must be knowledgeable in using SketchUp and have familiarity with building information modeling and how to best organize and map it to excel and IFC. ++++ I just wondering, how well could you organize sketch up models. Outlining groups and components Naming all materials in model - Material name - Material code/part numbers Naming all components in model -component names -part numbers Group...