CAD/CAM Jobs

Project specific instructions: 1. Building system Lightweight frame structure (Stud and Track) as attached picture. 2. External Wall cladding will be AAC blocks. 3. Wall insulation will be Rockwool. 4. Internal Wall cladding will be gypsum boards. 5. Roof will be flat truss with waterproof and heat insulation. 6. Ceiling will be gypsum boards. 7. Foundation will be concrete. 3 stair steps from the ground level of the villa. What we expect from the engineer: 1. Complete structural loads study by STAAD. 2. Complete AUTOCAD structural drawing for the project. 3. Items quantity list with details. 4. A detailed drawing of the areas where the pieces of the structure are connected to each other. 5. We will submit all the studies that have been prepared from your side to the Abu Dhabi Municipal...

请注册或者登录后来查看详情。

Need review and Stamp for Commercial Construction drawings

Would like to find someone to routinely do CAM work and produce mill paths, etc. for job shop parts.

I am subdividing a block and I need designs for 3 homes asap. I require this as soon as possible so that I can finish the subdivision in relation to the earthworks.

The file "" contains eight different parts. The file "" contains further instructions regarding the holes: The exact diameter and some of the holes are threaded. 1) Convert the parts in the skp file into eight single STEP files. 2) Converrt the eight part into manufacturing drawings. Use the file "" as a template and use the same drawing / text styles as in this file. Use the dxf version AC1032. 3) Zip all the 16 files into one file and name it according your name on freelancer. 4) Make a dummy entry. I'll contact you by private chat and you can upload your zip file there for checking.

Using existing site drawings of a warehouse, create 4x new drawings (copy) that represent the correct scale and layout of each building. The job should be very easy for a capable illustrator, designer or architect.

Drawings - 2D CAD RCC RCC Detailing such as structural foundation, cip beams, columns, slabs coordinating structural dwgs with arch, mep clash etc.

County requires an engineering stamp on drawing for a footing for cargo containers. We have a CAD drawing for the footing for tornado/hurricane but county requres a stamp. Like we have a lot of theses in Stckton area.

We have a CAD drawing for a footing to support/hold down a 40' container in case of tornado/hurricane.

SE NECESITA DIBUJANTE DE ARQUITECTURA CON EXPERIENCIA EN MANEJO DE REVIT Y AUTOCAD

I need a line drawing with the dimensions of a seat meant for sitting on stairs. The Dimensions: 24"W x 28"D x 17"H Seat Height = 3" I would like 3 views: Side view, top view, and front view. I have attached photos of similar product for reference.

more info will b shared in chat

Projet de villa en 2D via le logiciel Autocad

I have the measurements of a landscape with the required 2D house plan drawing. I need a freelancer to convert the house plan drawing to AutoCad

Under construction villa interior design is required. AUTOCAD Drawings available l. Arabic language in communication is preferred

I am looking for a freelancer that can do a CAD Drawing/Rendering job. This job is an 1100-1200 SQ FT cabin in the mountain. It needs to be scaled so I can see each room size/floor plan and 3-D rendering of the exterior. The outside will be a shed-type roof with board and batten siding. Also including decking.

aluminum sound dispersion device for speaker

Turn 4 products to illustration with dimentions. Each one from 2 sides.

We’re assembling a multidisciplinary product development team to develop a new Robotic Cooker. We anticipate that this project will need the following areas of technical expertise: Mechanical engineering, electrical engineering, and industrial design. Musts: • Fluent in English • Work around EST time zones • Experience with motors (servos, DC, etc.) and encoders for robotic arms • Experience with Shafts and Bearings You are invited to apply as a member of this team. As such, you only need to possess some of the above skills, as there will be multiple specialized team members. Thank you!

I need a freelancer skilled in architecture to design a 2D house plan drawing, that Includes 2D

Want to do structural design of unipole 9 m high

I’d like a unique and beautiful design for a device. You don’t have to digitize your sketch, just sketching your design by hand is enough for me. Of course, if you want to digitize it, then that’d be a great plus too. The device is simple: you slide it up to reveal the 3.5mm jack, the middle position hides it, and if you slide it down it reveals the usb plug for recharging the device. This device should have at least one button for turning it on and off. It might have a volume up and down button, but only if it makes the device look more beautiful. Lastly, it needs a 3-4 dot battery indicator above the power on and off button. That’s the basic requirement. You’re free to get creative with how you imagine this device will look but keep these basic requiremen...

The Junior Civil Engineer will provide design and drafting support on water resources and civil engineering projects. The designer will be expected to develop 2D and 3D features within multiple CADD programs (AutoCAD and Bentley software) to evaluate design alternatives and produce figures for construction documents.

Hello, I am looking for a draftsman to create and modify CAD electrical drawings, on an ongoing basis. I have included a sample of a scanned document that needs to be converted, the full document is 42 pages and this will be the first job. Please only reach out if you are able to do this work on an ongoing basis. Look forward to your reply. Thank you.

请注册或者登录后来查看详情。

Construction of two story 2000 Sqft in DEHRADUN. We want a quality engineer civil IMMEDIATELY. You may make a what’s app call to me at 8527104074 or message .

80 Herbert Street Middle Park The Pty is an old double fronted weatherboard. It has a central hallway with 3 Bedrooms to the right of the hallway and two double bedrooms to the left. The central hall way opens to a lounge/dining room which extends across the back of the house, but not all the way across, its stops about two metres short of the boundary on the left, and in that two metres is a small bathroom about two by one and a half metres. The second room on the left is the kitchen and it has an opening to the back lounge room which was the old external window. We want to move the bathroom to the central single bedroom on the right side of the hall way. With the old bathroom gone we want to extend the lounge/dining room to the boundary. The old lounge/diningroom/bathroom will be...

i have one project that requirements is fire protection and Coordination drawings in auto cad

I can describe it through voice or writing. But I need drawings of a toy at different angles.

Looking to get a buisness logo drawn up. Work in mining as a belt splicer. Involving conveyor belts. Total conveyor maintenace. TCM As attached normal conveyor plant drawings are basic. Looking at having the T drawn like that over the C and M.

sewing machine cam for early 50s viking

Need a structural engineering expert for a small gig Project duration: 1 day More details will discussed on chat.

Subject: Door Gap Measuring Tool : Hope you can help, I have attached two photos of door gap ( between frame and door) measuring plastic tools. We have designed a double sided tool rather than single side in the photos. These are for measuring side and top of doors one end then thicker at the other end to measure the door threshold which is allowed a larger clearance gap. We would order 1000 for the first order then reorder when needed. Looking for a company to make these with printing on and a price if possible. If its something you can do I will send the design through via email. I am based in Rotherham so would be great to use a local company. Regards Phil Renner

I need a design for an Eco Home, passive house standards, renewable energy supply, off-grid services, rainwater harvesting and sewage-water recycling technology, prefabricated construction technology.

I need to develop a paint manufacture company here in Dominican Republic , and need an expert to to develop the products .

I need to develop a paint manufacture company here in Dominican Republic , and need an expert to to develop the products .

Design injection molds from print for a 300 ton press

I am the owner of Katherine Way, a women's apparel company based in Fenwick Island, DE. We manufacture and sell apparel and accessories to upscale boutiques, golf and country clubs, resort hotels and other high end retailers. We need an experienced sewer to sew custom printed canvas tote bags and pouches. Printed fabric is provides, along with all notions. A professionally designed pattern has already been developed. This would be piece work, with payment in full when the completed bags are delivere

Need to read Revit files of drawings from one future real estate development, find locations of 20 artwork installations (walls and floors) and provide exact dimensions as well as extract to other file format for ease accessibility by artists and designers (who don't use Revit). The freelancer would receive the Revit file, get on a call with the dedicated person from APL to understand what they are looking for, identify the approximate 20 locations and complete the task of extracting the necessary information, exact dimensions, and saving each on more accessible formats.

I want a CAD design for a rotary liquid filling machine. Up to 1 litre for bottles.

Need a design and a render completed for a facade land scape and interior For a duplex we have already designed in Sydney Australia Program we used it archicad so must be using same program to help us complete

Create a first floor plan for the Ground floor plan using AutoCad

I would like to get a metal Kris (sword) handle made and I require some CAD drawings done up for the manufacturer. I have some photos and dimensions. Feel free to ask for more information, I do not have a piece made up to model off. Thank you.

I have a power supply board, physical board empty and a jpg of some changes to be made. The designer has the file and has gone missing in action. Need help to enter and revise so that new revised Gerber Files can be ordered. The attached doesn't show foil on top but shows foil on bottom.

i will send more details in chat make sure u know sketchup and autocad linpro ansys

Hi there, I have a drawing of what we would like, I would love for the it to look essentially the same as drawn, just with symmetrical sizing and on a format that we can use to be uploaded into CNC machines ect..

Electrical and plumbing , Water management & sanitation , harvesting , layout .

I need post prosser for turnmill

Need electrical drawings for room