CAD / SolidWorks Jobs

Je souhaite collaborer avec un ingénieur horloger capable de transformer mon idée de chronographe en un prototype fonctionnel. Le projet porte sur un chronographe mécanique au style résolument moderne, logé dans un boîtier en acier inoxydable. Objectifs clés • Définir l’architecture du mouvement chronographe (roue à colonnes ou came, embrayage horizontal/vertical, épaisseur visée). • Réaliser la modélisation 3D complète (CAD) du calibre, du boîtier, de la lunette, de la couronne, des poussoirs et du fond. • Spécifier les tolérances, matériaux internes, traitements de surface et contraintes d’assemblage. • Fournir les plans te...

I need a business-grade projector purpose-built for classrooms that lets teachers and students interact directly with the projected image. The core requirement is an integrated interactive touch-screen capability—think smooth, low-latency annotation right on the board—paired with the brightness and reliability expected from a presentation unit. Here’s what I’m after: • Hardware: a projection engine bright enough for well-lit rooms, plus the touch-enabled overlay or sensor array that will register multiple fingers or a stylus without calibration headaches. • Software: driver package or embedded firmware so the touch layer appears as a standard HID device to Windows, macOS, and ChromeOS. Annotation tools or whiteboard software hooks are a bonus. •...

Ik zoek iemand die voor een commerciële elektrische installatie een volledig ééndraadschema opstelt volgens NEN 1010. Wat ik aanlever • Een voorbeeldschema ter referentie • Ruwe lijst met alle groepen en verbruikers Wat jij oplevert • Een duidelijk, professioneel schema in AutoCAD (of vergelijkbaar CAD-pakket) • Alle circuitgroepen overzichtelijk benoemd • Aarding en aardlekschakelaars exact gepositioneerd • Specificaties van apparaten en belastingen per groep vermeld Belangrijk – Het schema moet strikt voldoen aan de NEN 1010-richtlijnen. – Bestandsformaten: dwg én een leesbare PDF. – Heldere layer-structuur en benamingen zodat collega-installateurs het makkelijk kunnen aanpassen. Heb j...

I’m looking for an experienced MCC electrical engineer to prepare fully detailed control-panel layouts for a new motor control center I’m building. The scope is strictly design and drafting, so no field installation or troubleshooting is involved. The drawings must be produced to recognised industry benchmarks—UL508A and IEC 61439—and be ready for direct hand-off to our fabricator. I’m happy for you to work in AutoCAD Electrical, EPLAN, or a comparable CAD platform as long as the native files and PDFs are delivered. Deliverables • Scaled control-panel layout drawings, showing component placement, wireway, and clearances • All supporting schematic pages referenced by the layouts • Bill of materials tagged to each drawing • Final ...

I have a set of steel shafts that must move from concept to shop-floor-ready. I need you to develop the complete 3D CAD geometry, create fully dimensioned production drawings, and generate the CAM program so my CNC lathe and mill operators can start cutting without additional tweaks. The shafts are all-steel, so please allow for appropriate cutting speeds, feeds, and tool choices in your toolpaths. I typically machine on Fanuc-controlled lathes and Haas mills; post-processors for either environment are perfect. Preferred design platforms are SolidWorks or Fusion 360, and Mastercam is my usual go-to for toolpath creation, but I’m open to equivalent solutions if you can supply reliable G-code. What I’ll look for before signing off: • 3D model (STEP or native file) that mat...

I need a complete SolidWorks model and accompanying static-load analysis that proves the assembly can carry the specified load with a minimum safety factor of 4. All existing part files and any material specifications are already in my package; use exactly what is written there when assigning material properties. Scope • Build or tidy the full 3D assembly in SolidWorks, adding any missing mates or constraints so it behaves realistically. • Produce clear, fully-dimensioned drawings for every part and for the final assembly. • Run a static FEA study that reflects the real boundary conditions and load magnitude supplied in my notes. • Optimise the geometry only if necessary to reach or exceed the 4× safety factor, but keep the general layout unchanged. &bu...

I need a mechanical part designed and converted into a CAD file. The part is an air intake for a jet engine, and it needs to be designed from scratch. Ideal skills and experience: - Proficiency in CAD software (e.g., SolidWorks, AutoCAD) - Experience with designing mechanical components, especially for aerospace applications - Understanding of aerodynamics and engine component functionality - Attention to detail and ability to create accurate, manufacturable designs

Nylon Ideal Skills and Experience: - Experience with nylon gear fabrication - Precision machining or 3D printing skills - Ability to replicate detailed specifications Please provide photographs of both sides of the original gear.

I need a detailed design for an on-road RC car body in the style of a specific sports car model I have in mind. Requirements: - Design an on-road sports car body for a 1/28 RC car. - Must be based on a specific sports car model I will provide. Ideal Skills & Experience: - Proficiency in design software (e.g., CAD). - Experience with RC car body design. - Strong understanding of sports car aesthetics and dimensions. - Attention to detail and creativity. Please share your portfolio with relevant designs.

I'm seeking an experienced designer to modify an existing monolithic aluminium formwork design for a residential building. Key Requirements: - Modify current design for buildability and cost-effectiveness. - Design shell plan of the building from architecture plan,rcc plan and MEP drawing. Ideal Skills and Experience: - Expertise in aluminium formwork design. - Experience in residential construction projects. - Strong understanding of structural requirements and modifications. - Proficiency in CAD software for design adjustments. - Ability to meet project deadlines and communicate effectively. Please provide samples of previous work and relevant qualifications.

Need a freelance CAD/CAM engineer for a machined part project. Scope: • Convert an existing PDF drawing into a 3D CAD model • Verify dimensions and manufacturability • Create a STEP file and native CAD file • Generate CNC toolpaths and G-code • Provide setup notes and tooling recommendations if needed Part Type: Machined metal component Preferred Software: • SolidWorks • Fusion 360 • Mastercam (Equivalent software is acceptable) Deliverables: • STEP file • Native CAD file • PDF drawing • CAM file • G-code ready for my machine controller Please include: • Examples of similar machined parts you have modeled • CNC programming experience • Software used • Hourly rate or fixed-price quote These will run o...

I need a seasoned CAD professional who can take my PDF reference drawings and turn them into production-ready CAD assets. The core of the job is accurate 2D technical drafting in AutoCAD, but I also want the matching 3D models created in SolidWorks for the associated mechanical parts, full assemblies, and any sheet-metal components. Precision matters: every view must carry correct dimensions, tolerances, and clear annotations so the files can move straight to manufacturing. Clean layer management, proper line-weights, and a tidy title-block are essential. Preferred workflow • I send you the PDFs and any quick notes. • You return a first pass so I can mark up anything that needs tweaking. • Final deliverables arrive on the agreed date. Required output formats DWG a...

Looking for serious freelancer and attractive and impressive and fast freelancer required

We are looking for an experienced industrial/product designer to help develop a new baby bottle and modular feeding system for my brand, Bobi & Co. We have an initial product vision and am looking for someone who can help take it from concept through to a detailed, manufacturable design. The bottle will be designed as a modular system that can adapt as a child grows, with interchangeable feeding components such as a teat, sippy and straw. Experience with baby products, food-contact products, silicone, stainless steel and manufacturing would be highly desirable. Please provide examples of relevant product design work and explain your experience taking products from concept → specifications/CAD → prototype → manufacturing. We are looking for someone who can also guide us t...

Necesito un modelo 3D del cabezal de impresión XP600 a escala 1:1, con todos sus componentes externos fielmente representados: canales de alimentación, conexiones eléctricas, zonas de disipación de calor y cualquier relieve que pueda influir en el montaje o la circulación de tinta. Caracaza de inyeccion de silicona aire exampler formato manual : para sellar con una maquina aire silicona ,sellado total los cables FFC El objetivo es usar el archivo como base para futuros ajustes y prototipado, por lo que requiero un STL editable proveniente de un entorno CAD (puede ser SolidWorks, Fusion 360, Inventor u otro software paramétrico siempre que mantenga la historia de construcción). Entrego fotografías, fichas...

I need production-ready CAD models of several configurations of casters and wheels delivered in native STEP format. Every geometry and surface detail has to match the real-world part exactly—height, wheel diameter, tread width, mounting plate, brake mechanism, even the profile of the yoke. These files will feed directly into design and visual workflows, so dimensional tolerance must stay within ±0.05 mm and the visual fidelity must be suitable for marketing renders. You are free to build the files in SolidWorks, Inventor, Fusion 360, Creo, or any comparable platform, as long as the final export is a clean, watertight modern STEP file with properly named feature tree when imported. Deliverables • One STEP file per caster size or variation • A short PDF 2D draw...

I'm seeking a skilled construction designer to create precise designs for sidewalks and ramps. Key Requirements: - Accurate measurements and angles - Detailed CAD designs Ideal Skills and Experience: - Expertise in construction design - Proficiency in CAD software - Experience with sidewalks and ramps design

Hi! I’m looking for a product designer to create 5 simple table lamp designs for my brand. Project Scope I need 5 different table lamp concepts with simple but interesting shapes. The designs should be: * Simple * Minimalist * Clean * Modern * Easy to manufacture * Not overly complicated * Visually distinctive I’m not looking for highly complex or complicated designs. The goal is to create simple products that still look unique and premium. Design Direction Please focus on: * Simple geometric or organic forms * Clean silhouettes * Minimal number of components * Easy assembly * Practical construction * Suitable for 3D printing or simple manufacturing * Good proportions for a tabletop lamp The 5 designs should have different shapes, but all should remain simple and comme...

Dispongo de un boceto hecho a mano para una finca de 2 100 m² y necesito que lo conviertas en un plano limpio, legible y a escala. El objetivo es la planificación agrícola, por lo que debe incluir: • Ubicación precisa de cada bancal • Dimensiones exactas de todas las secciones (invernadero, árboles, garaje y vivienda) • Distribución de los sistemas de riego Cuento con mis propias mediciones y la orientación ya definida; solo debes trasladarlas con fidelidad al dibujo final. Entrego el croquis escaneado y las notas de medida en cuanto iniciemos. Busco un archivo digital listo para imprimir (PDF y, si es posible, el editable en DWG o similar) que refleje con claridad las proporciones y mantenga la escala indicada. Si tien...

I need a complete CAD design package that gives me both detailed 2-D drawings and clean, editable 3-D models. The project involves translating my existing sketches and dimensions into production-ready files that I can send straight to machinists and rapid-prototyping vendors. Scope • Turn hand sketches (PDF/PNG) and written dimensions into accurate parametric models. • Produce fully dimensioned 2-D drawings for fabrication. • Deliver native Fusion 360 files plus neutral formats (.STEP, .IGES, .DWG or .DXF) so I can make future edits without starting from scratch. Key Expectations • All geometry must be true-to-size and organized with clear naming conventions. • Tolerances and callouts included where noted in my brief. • Assemblies should be constrain...

I have three complete sets of architectural PDF plans that I need converted into clean, fully editable AutoCAD files. Each sheet must match the original layout, line weights, and scaling so that I can pick the drawings up immediately for design development. Scope – Three separate plan sets, each one redrawn from scratch in AutoCAD. – Default layers and standards are fine; keep the file structure simple and intuitive. – Include only basic measurement annotations (dimensions already shown on the PDFs) so the drawings can be checked quickly for accuracy. No material schedules or extra notes are required. Deliverables • One DWG file per plan set, saved back to AutoCAD 2018 or earlier. • All geometry drawn true-to-scale in Imperial units. • A q...

I have a run of modular cabinets to put through the shop and need a clean, production-ready cut list built around the way we work. All boxes are being fabricated from 18 mm plywood, processed on our panel saw, laminated in the cold press, edged on a single-sided edgebander, then drilled on a two-head multi-boring machine. You will take the cabinet dimensions I provide and translate them into a fully optimised sheet yield, complete with part names, finished sizes, grain direction, edging indications, and drilling references so every station knows exactly what to do next. Optimisation should target standard 2440 × 1220 mm boards and minimise off-cuts. Deliverables • Excel (or CSV) cut list with quantities, sizes, edging sides, and drill notes • Nesting layout/PDF for t...

We are looking for an experienced Mechanical/Industrial Engineer specialized in SolidWorks or similar CAD software to design a reusable steel mold for the mass production of precast concrete housing modules. The concrete module is approximately 3.0 m wide × 7.0 m long × 3.0 m high, open at the top, with an additional 1.2 m balcony on the front side. Main concrete specifications: * Wall thickness: 80 mm * Floor thickness: 200 mm * 4 concrete walls + floor cast as one monolithic piece * No roof during this casting process We need the complete manufacturing design of the steel mold, including: * External steel formwork * Internal negative/core mold * Steel plate thickness calculation * Structural frames and reinforcement ribs * Corners, connections and locking systems * Openi...

I have a hand-drawn sketch of a commercial space that needs to be translated into a clean, accurate CAD floor plan. The brief is simple: capture the walls, windows, and doors exactly as shown—no furniture, fixtures, electrical, or plumbing at this stage. Please draft the plan to scale, keep elements on logical layers, and follow standard line weights so the file drops straight into our wider project set without rework. The final deliverable I need is a fully editable DWG file; a companion PDF for quick viewing would be appreciated but is not mandatory. If you’re comfortable turning straightforward sketches into precise DWGs and can return the file promptly, I’d love to hear from you.

I run an Australian bath and body brand. I need an original product design for a wall mounted silicone shower caddy, similar in function to existing organiser products on the market (holds bottles, has a pocket or shelf, mounts to a wall), but with its own distinct shape and silhouette that isn't a copy of any competitor's design. Reference for the type of product category, not to be copied: What I need: 2-3 original concept sketches or digital renders of a silicone shower caddy shape The silhouette, outline and pocket structure needs to be genuinely different from the reference above and any other existing market products, this must be an original design, not a variation of it Consideration for manufacturability, needs to be producible by a silicone injection moulding factory, ...

Need someone who has experience in Sewing Patterns. I’m preparing a new linen collection and need production-ready patterns for dresses, shirts and pants. The line will be cut from lightweight linen, so each pattern must account for the fabric’s natural drape, breathability and tendency to relax after wear. Aesthetically I’m aiming for a clean Classic look with subtle Modern touches—think timeless silhouettes refined with contemporary proportions. If you see opportunities to introduce a slightly different design direction or to adapt the patterns for medium-weight cloth later on, feel free to flag them so we future-proof the work. You would take my sketches, inspiration photos and measurement charts, translate them into accurate digital patterns (preferred in Ado...

I'm looking for a CAD designer to create a machine tool specifically for pinching water hoses (layflat of 16” diameter). The design should prioritize ease of use. Key Requirements: - Design a machine tool for pinching 16” diameter water hoses. - Focus on ease of use in the design. Ideal Skills and Experience: - Proficiency in CAD software. - Experience in designing machine tools. - Strong focus on user-friendly design principles. Please provide examples of similar work.

I'm seeking a specialized piece of machinery to create waves in a waterbed mattress. The mechanism should ideally be a crank and slider, converting circular motion to an up-and-down motion, repeatedly pushing down on the mattress. It needs to run for up to 9 hours. Key Requirements: - Electric power source - Whisper-quiet operation (20-30 dB maximum) - Cord length of 270 inches with an in-line on-off switch - A combination of metal and plastic materials Ideal Skills and Experience: - Mechanical engineering expertise - Experience with quiet electric motors - Proficiency in designing with metal and plastic materials - Ability to create custom, reliable machinery Please provide a detailed proposal, including relevant experience and estimated timelines.

I have an existing Tekla Structures model that already contains the full set of steel roof trusses for a live project. I now need structural modifications made to those trusses inside the model—not cosmetic tweaks or detailing touch-ups, but genuine geometry and member-sizing changes that will keep the model fabrication-ready. You will receive: • the current Tekla and any reference drawings • my mark-ups that identify which truss zones must change, the new bearing points, and the required clearances What I expect back: • an updated Tekla model reflecting every modification, fully numbered, clash-free, and ready for export to NC/DXF • revised GA and truss assembly drawings produced directly from the model so I can review and sign them off Please be comfo...

I want to design 3 wardrobe for the given floor plan. Note i need Swing Door, Modern Accessories in it, Drawer for Watches, Sunglassess etc... Three Wardrobes Dimension : 1- 9 ft ×6ft 54 2- 9 ft×78 inch 3 - 9 ft ×5 ft wardrobe - Swing Door - Combination of Glass Cabinets and Wooden Cabinets - Option for Side Storage in wardrobe - One more side storage for hanging clothes - Watches Sunglasses Organiser Drawers - Pull out for Trouser, Sarees. - Other modern accessories - Clean and Practical Design Some of the inspirational accessories can be : Smart Space OptimizersHydraulic Pull-Down Wardrobe Lifts: Lower upper-level clothes rails to eye height using integrated fluid Trouser Racks: Feature non-slip flocked bars to hold multiple pants crease-free on telescoping runners...

I need a complete mechanical design package for four identical 800 mm-wide belt conveyors that will carry bulk materials in an outdoor setting. I will supply the full layout and dimensional data; your task is to turn those numbers into ready-for-fabrication documents. Because these units will be exposed to the elements and loaded with bulk product, reliability and maintainability are critical. All three idler styles—troughing, return and impact—must be incorporated, along with properly sized pulleys, a robust take-up arrangement, and a drive system that aligns the motor, gearbox and coupling without shimming on site. The steel structure, galleries or trestles should be checked for deflection and vibration against standard limits. Deliverables I expect: • Detailed 3D mode...

I have a metal hinge that currently works well but I need one that is longer and slightly more narrow to fit a tight space. I have remodeled the components but the nature of the hinge requires precise dimensions for it to work properly. It's a concealed hinge. I will make compression molds and the part will be made from carbon fiber. In addition. I have a locking/latching mechanism that I have about 80 percent there but need some help to get it over the finish line. This would involve an actuator and a latch that connects with a pin and applies a small amount of pressure to compress a gasket. I have CAD for both that can be provided in step or IGES format. Because the hinge will be part of a mass-produced consumer device, it has to handle high load-bearing situations, resist corrosio...

I’m ready to turn my concept sketches into a production-ready carbon-fiber drone frame and I need your CAD expertise. The brief is straightforward: create a lightweight yet exceptionally strong body that keeps carbon-fiber lay-up and CNC trimming in mind from the very first sketch. Structure & layout • Fixed motor mounts at each arm tip—no adjustability needed there. • An adjustable battery bay so I can fine-tune the centre of gravity as payloads change. • Clearly defined mounting points for the flight controller, ESCs, GPS, and any auxiliary boards, plus tidy wiring channels that let cables disappear inside the arms and fuselage. Engineering focus You’ll need to dial in wall thickness, internal ribbing, and smooth joint transitions that res...

We’re launching a curated jewellery line for our new mobile platform and want original, modern necklaces and bracelets crafted primarily in gold and silver. Your creative signature matters to us, so every accepted piece will be showcased with your name and brief designer bio directly on the product page. Here’s how the collaboration works: you share your CV or portfolio first so our team can confirm that your aesthetic aligns with the brand. After approval, you submit design concepts; we review each one against our internal criteria and select the pieces that move forward to production. Payment is issued per accepted design, giving you full freedom to pitch as many ideas as you wish without any upfront quota. Deliverables we need for each concept • A clear sketch or CA...

I need a complete technical RFP for an adjustable maintenance stair that will service commercial aircraft. The unit must be designed around an aluminium structure, so every calculation, material note and finishing recommendation should assume that alloy. To keep this moving, I have only seven days from award to final draft. Within that window I expect a concise document that an MRO or fabrication partner could quote on immediately. CAD views, basic load analysis, adjustment range, wheel/locking mechanism details, hand-rail compliance points and an exploded bill of materials must all be included. The acceptance check is simple: if an independent fabricator can price the job from your pack without sending follow-up questions, we are done. I will be available throughout the week for cla...

Necesito el diseño completo de un transportador sinfín capaz de extraer arena de una solución líquida. La estructura principal debe ser de acero inoxidable y la longitud total no debe superar los 5 m. Quiero que el movimiento provenga de un motor eléctrico y que las aspas incluyan cepillos para arrastrar eficientemente el material; si tienes una propuesta distinta que mejore el rendimiento, también la consideraré. Entrego los parámetros operativos (caudal de arena, densidad de la mezcla y velocidad deseada) una vez iniciemos, para que puedas: • Dimensionar el tornillo, paso, diámetro y espesor. • Seleccionar el motor, reductor y elementos de transmisión apropiados. • Definir el tipo y fijación...

CAD BRIEF · NT Lite Stand 2340 | Darwin Sheetmetal · millimetres only FREELANCER CAD REQUEST Bolt-together squat stand + 610 mm spotter arms Model a compact home-gym squat stand with pull-up bar, J-cups and a pair of 610 mm safety arms. Look and function like a Rogue SML-2 / SAML-24, but use Australian steel and millimetres so Darwin Sheetmetal can laser-cut and weld it. No Rogue names or logos on the model or drawings. Project name: NT Lite Stand 2340. AI draft — you decide the fit-up. This brief was generated with AI from product photos and public specs. Some numbers may conflict with each other or with the pictures. The draftsperson is expected to resolve that. Priorities, in order: (1) every bolt and pin hole lines up so the stand can be assembled without si...

Industrial Designer Needed – Modular Hunting Bino Harness System I’m looking for an experienced industrial/product designer to help develop a new modular binocular harness system for hunting. The concept combines technical soft goods with custom mechanical attachment hardware. I already have the overall product concept, functionality, and design requirements established. I need someone who can turn the concept into a realistic, manufacturable design and prototype-ready CAD/specification package. The Product The system will use interchangeable binocular carriers designed for different optic sizes, including 42 mm and 56 mm binoculars. The user can carry either carrier individually or mechanically connect both carriers together. A major part of the project is developing a li...

I'm looking for a skilled material engineer or specialist to create a 12-inch urethane hinge for a small sailboat rudder. This hinge will need to withstand high-stress conditions and is intended to replace an old, degraded hinge that turned into a slippery goo after 20 years. Key Requirements: - The hinge must be durable, specifically designed to resist cracking, deforming, or detaching under stress. - It should withstand exposure to water without degrading. - Ideally, you should have experience with high-performance materials, particularly urethane or similar polymers. Please provide samples or evidence of previous work with high-durability hinges or similar applications. Thank you!

I need highly detailed CAD drawings for a commercial building. The drawings should include: - Façade: All architectural details, materials, and textures - Roof: All elements including drainage, HVAC, and skylights Ideal skills and experience: - Proficiency in CAD software - Experience with commercial building projects - Attention to detail and accuracy Please provide samples of similar work.

Freelance Revit MEP Modeler / BIM Coordinator – Short-Term Project We are looking for an experienced Revit MEP Modeler / BIM Coordinator for a short-term international project involving industrial hydroponic equipment. We have fully designed equipment models in SolidWorks that need to be converted into optimized Revit Families and integrated into the client’s live Revit master model to produce coordinated MEP shop drawings. Scope of Work 1. SolidWorks → Revit * Convert SolidWorks models (.STEP, .SAT, or similar) into optimized, lightweight Revit Families (.RFA). * Simplify geometry where needed while maintaining accurate dimensions and key equipment details. * Ensure the families do not unnecessarily increase the Revit project file size. 2. BIM Integration & Coor...

I need complete CAD / CAM support for a mechanical part that will be machined on a CNC. Everything must be created in AutoCAD, from the first sketch through to the tool-ready code, so please be fully comfortable modelling and generating paths inside that environment or with add-ons that integrate seamlessly with it. The geometry is straightforward—mostly prismatic features—but accuracy is critical because the part mates with an existing assembly. I will share the dimensional hand-sketch and a brief tolerance table once we start. Standard inch units apply. Deliverables • Fully detailed 2D drawings (DWG) with dimensions, tolerances, and call-outs • Clean 3D model (DWG or STEP) reflecting the final dimensions • Verified G-code ready for my CNC mill (Fanuc po...

Project Description We are looking for an experienced Product Designer / Packaging Designer / Structural Packaging Designer to redesign the pod storage shown in the attached image and develop a manufacturing-ready cardboard version. The original product is made of plastic. We want to manufacture a similar product using thick, rigid cardboard / paperboard, with a flat-pack design so that it can be transported efficiently and assembled locally. The final design must be practical for real-world production, not just a visual/3D concept. Our Main Objective We need a cardboard pod storage that can be: • Manufactured from thick and rigid cardboard/paperboard • Supplied to us in a flat, unfolded condition • Easily transported and stored • Folded and assembled locally • Ass...

I have a working prototype of a transverse dental floss holder with a thumb-operated mechanism to tighten floss for insertion between teeth and slacken it for cleaning them. Key requirements: - Material: Plastic - Compatibility: Both waxed and unwaxed floss - Tension variation: Push button mechanism, preferably tightening floss by more than 10mm achieved by prototype - Ease of threading floss through the mechanism, which may require hinged case Ideal skills and experience: - Experience with plastic molding or fabrication - Familiarity with dental care tools - Mechanism design expertise, especially push-button systems

I have just taken possession of a two-bedroom apartment and already hand-picked every major piece of furniture for the foyer, living-cum-dining area, master bedroom and guest bedroom. What I now need is a talented interior designer who can translate my floor plan, 2D sketches, furniture photos and exact dimensions into convincing, photorealistic 3D visuals. The brief is straightforward: • Style: firmly Modern—clean lines and a balanced, uncluttered feel. • Colour direction: neutral, but weave in the statement pieces I have chosen so the palette still reads as one cohesive contemporary space. • Scope: every room, not just one priority zone, must be visualized to the same standard. You will receive: – CAD/pdf floor plan with measurements – Existing 2D...

I need a measured building survey of a small residential property (1-2 floors). The survey should include: - Detailed floor plans - Accurate elevations - Comprehensive 3D model Ideal skills and experience: - Proficiency in CAD software - Experience with building surveys - Attention to detail and accuracy

I am seeking an experienced mechanical design engineer to create a complete engineering design package for a 4.5 kg CO2 fire-extinguisher cylinder destined for industrial environments. The unit will store CO2 under high pressure, so the CAD models, calculations, and manufacturing drawings must accurately reflect this rigorous duty Specifications Working Medium: Carbon-Dioxide (liquid/gas) Fill Capacity: 4.5 kg (sized for industrial hazard coverage) Water Capacity: 6.8 Liters Working Pressure: 150 BAR Test Pressure: 250 BAR Neck Thread: IS 3224Type-4, Size-2 Material: 37Mn Steel (throughout the pressure envelope) Heat Treatment: Normalising Design Code: IS 7285 Part-1 Expected Deliverables Fully-Parametric 3D CAD Model: Delivered in SolidWorks, Inventor, or standard STEP/IGES formats. T...

I need an automated AHU filter cleaning machine designed. I'm looking for expertise in 2D drafting and PLC controls design. Requirements: - 2D Drafting: Full system design. - PLC Controls Design: - Automated cleaning cycle - Fault detection and reporting - User interface for manual control Ideal Skills and Experience: - Proficient in CAD software for 2D drafting - Experienced in PLC programming and control systems - Background in mechanical and electrical system integration Please provide portfolios and relevant experience in your bids.

I have complete CAD drawings for a small tabletop dryer that combines a basic airflow system, a low-temperature heating element, and a simple timer circuit. The goal is to prove the concept, not to create a production-ready unit, so I’m looking for a pragmatic builder who can source readily available components from my preferred parts list and put together one clean, safely wired prototype. What I’ll hand over: • PDF and STEP drawings with dimensions, airflow path, and wiring diagram • A spreadsheet listing the off-the-shelf fan, cartridge heater, timer module, and enclosure parts I’d like to use (all stocked by major suppliers) What I need back: • A fully assembled, bench-tested prototype that runs for at least one hour without overheating • Bas...

I'm looking for someone to modify a NACA duct. The changes needed are: - Add flanges for attachment to the outlet - Resize the outlet to specific dimensions I need to print on a Bambu 3d printer. I need to own the design and be able to tweak it so what cad program do you use that i can then subsequently modify ? Ideal Skills and Experience: - Experience with duct design and modification - Ability to accurately resize and add features like flanges - Proficiency in relevant CAD software Please provide examples of similar work done. Looking forward to your bids!