土木工程 Jobs

I am looking for an experienced tekla structure coach to help me with my expertise. Although I have a beginner level of experience with tekla structure, I would like the teaching to be live-streamed in order to get the most out of the lessons. Therefore, I am searching for an experienced coach that can teach me and answer any questions I have regarding the software in an efficient and effective way. If you think you are the right person for the job and have the necessary skills and experience, please apply for the position and take this opportunity to expand your knowledge of this great software.

I am currently working on a building project I am seeking a freelance designer who can help me improve upon the current layout that I have for my building. While I have created a preliminary layout, I believe that a professional designer like yourself could provide me with a more refined and polished design that would enhance the overall aesthetic and functionality of the building. I am looking for a modern and functional design that optimizes space and maximizes natural light. I would like to provide you with more details about the project and the current layout I have in place. I believe that your expertise and creative ideas would help me create a better design for the building. Thank you for considering my request,

A small task of structural calculation is required

Hyperloop is a magnetically levitated capsule that aims to transport passengers and goods between metropolitan cities at a very high speed, Hyperloop design was initially conceptualized by Elon Musk in 2012. Hyperloop consists of a lowpressure tube with capsules that are transported at both low and high speeds throughout the length of the tube. The capsules are supported on a cushion of air, featuring pressurized air and aerodynamic lift. Passengers may enter and exit Hyperloop at stations located either at the ends of the tube, or branches along the tube length. It quickly becomes apparent just how dramatically the Hyperloop could change transportation, road congestion and minimize the carbon footprint globally. With the Hyperloop, extremely fast, inexpensive intercity travel wou...

We need a Civil draftsman for making drawings for our project in BPCL Mumbai Refinery

Need a digital (not just a wet stamp) for Florida for a single page drawing. All drawings and calculations already done. Also need to add a Wind Design Criteria used for the design.

Looking for someone to do drawings for me on Autocad - Shipping Container Industry / Modular Structures. Ongoing. Please contact me if you have experience and want to work with me.

Hi we’ve been asked to produce some technical drawings for fabrication by our client. We need detailed drawings of the attached please. Please can we get a quotation on works

Hello I am looking for someone to draw up an existing house in Chief Architect - see include layout drawings. The project will use metric units and is a 111sq.m two storey house. Chief Architect X10 is preferable Regards Noel Hughes

I need to get a architectural portfolio of 12 pages to be done (A3 landscape)

I am in need of detailed structural calculations and dynamic analysis in accordance with Staad standards. This project will not require heat transfer analysis, and I am confident that this set of specifications can be met. Let me know if you have any questions. Good luck bidding!

I need a stamped (state of VA) plan for a foundation for a small house. The footer and slab will be a monolithic slab on grade structure.

We have a 1.5 story house, and wish to convert it to a full two stories. It is in an R-5 district, which can go up to 40 feet, so zoning should not be an issue. We have an amazing contractor but need a structural review. Ideally the same person also has in house drafting and ability to file. Honestly, as the second floor will be one room, and as we know the design we want to do, more or less, we are not sure we need an architect as such.

I need the help of a very Good Structural engineer who can start work right away who knows how to do stuctural calculations with Staad and can produce an efficient report urgently

I need the toolbox designed for putting utility appurtenances and utility lines on top of google earth images. I need one toolbox designated for every utility and every line and utility listed in the box. for example, water, gas, telecommunication, sewer, etc., In every section I need whatever associates with that utility, water valves, fire hydrants, cable peds, etc.

We are working on a redecoration tender for the national trust in Sherbourne, GL54 3DH. We have a schedule of works which I will attach. I need a structural engineer to look at 5 masonry lintels that need repairs on them, if you have anyone that can meet up with myself at the site or is able to give me a quote that will be brilliant.

A certified mep engineer is required for a project to be done of a 5 storey building. Plz only apply if you are a certified mep engineer

Hello, I have enlarged my house. I added an extention of 12 feet by 29 feet to my house. In my extension, my contractor changed the slope of the roof to higher peak to avoid snow and water accumation. It is okay with the city but I require a letter of recommendaiton that basedon the plan after buildt is better than the one before built. My contractor did not want to add more loads to the existing roof so he made it V for the middle roof and then inverse V for the new extension to eliminate or to have less water, sinow, wind, etc problems. I need a letter of recommendation by an engineer to add to my architect plan to provide to the city. I have the plan of the extension before and after from the dratsman and architect. All I need is a letter to state that the new constuction is safere...

The proposed construction is located in very deep potential high water that may exceed 5+ ft in depth per City Study, SWS-027 & is adjacent to the FEMA Floodway. The current Base Flood Elevation near the site is 591 ft MSL. At a minimum please verify the structure will be built at or above 591 ft MSL and will be constructed outside of the FEMA Floodplain. The City is recommending the owner hire a civil engineer with a background in the floodplain mitigation to advise on the structure's finished floor elevation and to verify the structure will not lead to an impact on the FEMA Floodway and the Adjacent lot owners.

Need two designs that work within the parameters given

4 car garage with living space upstairs Hesperus Co 81326 (Laplata County) See drawing, I need a few adjustments to print. I have the file in all formats. Cell 847-852-0920 Todd Gibson

We are looking for a civil engineer to help us build a patio on the side of Oviedo Bowling Center. This will be an area where overflow of guests can comfortably wait for a lane or spend an evening. Food and alcohol will be permitted in this area, it will need a fence around the border. Large concrete slab patio with metal awning most of it. Have concrete company and awning company secured. City of Oviedo says that we need a civil engineer to provide signed and stamped plans and a "amendment to the site development order." I have attached a crude diagram of the patio and a copy of our alta survey so you can get a better idea of what we are looking at. I am available by phone at 407-435-7307. Thanks, Kurt van Zyl Proprietor Oviedo Bowling Center Home of The Pinball Lounge

Searching for Civil Engineer services-to proceed with requirement for Pending P & D Permit-Maricopa County-Tonopah, Az. 85354-Chain link fencing perimeter residence-Requirements: Civil Engineer grading & drainage plan-Fencing-include existing culverts-survey of property boundaries at homeowners request-(open to change of budget $ posted-not familiar with associated services requested)

Hi, I'm looking for a Freelancer expert in STAAD Pro who can help me with construction consulting for an existing small structure model. This project requires extensive knowledge of structural engineering principles and software capabilities. The ideal candidate should be familiar with structural modeling and analysis of both steel and concrete structures. Knowledge of relevant international standards, code compliance and code check procedures is a must. I envision the project to involve gap analysis between the current model and applicable codes, verification of involved design parameters and their conformance to the relevant standards and regulations, analysis of complex structural geometry, evaluation of detailed load combinations, interpretation of results, and optimization of ...

Hi! We are looking to build a shipping container home and need engineering drawings for our floorplan. I look forwards to hearing from you! Thank you, Kara

I am looking for a team of experienced contractors who can take on the challenge of building a new road for a commercial construction project. The project involves building a new road, along with all the associated civil works and infrastructure. This project will involve the use of gravel as the paving material, along with the necessary equipment and installation. The contractors should be able to effectively manage the project to a successful completion, and be able to adhere to set safety standards. This is a large scale project, and requires skilled teams of workers to carry out the construction work. The road must also meet public highways specifications and have the appropriate certifications.

I work for a façade specialized company located in Dubai. We have urgent calculations to be done for a project on going was wondering how fast could you help us in it and how many hours? The package includes Structural calculations for curtain walls, louvers and thermal calculations for each. Report to be prepared with a reference format. Those are the standards we are currently following: BS 8118 & AAMA TIR-A9-1991. We need to create STAAD analysis.

I’m not expert in revit or openbuilding, so what I am trying to do here is let say I have applied a solar panel on the roof, I know how to find the overall energy consumption and all that. But I also want to see the solar panel effect on let’s say an office inside the building, I want to know the effect of the solar panel like energy consumption and the energy generated by the solar panel to the office.

Land/Lot size is Depth 60 x facing 75 feet

Check integrity of our foundation

Need drawing of W-10 49 H-Beam with panel protection on it.

We are in the beginning stages of our project in creating a driveway so that we are able to drop off Families and Handicap in front of the church. The village of Hinsdale suggested we get a Professional Civil Engineer for our project. The Village stated they need a Sight Plan with a full topography. They also stated that we need to update our Plat of Survey. The one we have is about 60+ years old. Rather than just update our Plat of Survey, we are seeking guidance to make sure we stay within the codes for the Village of Hinsdale. I can be reached at 815-528-0000. Ole Mercado Facilities Director 201 N. Oak Street, Hinsdale, Il. 60521

I need to have an structural certificate for a gutter bridge, where i am looking to reduce the bridge from council required 150mm thick to 100mm thick. I need a design of 1m lengths by 620 wide that will satisfy council concerns about the load rating to ensure it adequate. Attached plans are rough, the quoted dimensions in this scope are what is required. I also need ASAP.

This is a quick contest to simply give me design ideas on how to create Ground Floor and First Floor layouts of a new 2-storey house (2 levels G+1). I just need ideas with sketches drawings of the 2 floors (GF and FF) with the dimensions. The complete architectural work will be done later after the contest is closed. See the attached files for additional details.

House built in 91, did not have A/C system. Renovations currently need a floor register design for amount needed. Also need duct work sizing and unit sizing.

-Submit the drawings of design, including architecture drawings, structural drawings (from PKPM). -Submit one report, include the process of design, the calculation by hand (beam and column), the calculation by computer. -Submit one drawing by hand, to draw one frame of steel bar distribution.

My rental property has mold, discovered on Jan 31, 2023 Restoration company has come in, and done demo to interior walls. Leak detectors came in and determined leak is not plumbing related. Restoration cannot continue until we came in and determined leak is not plumbing related. Restoration cannot continue until we locate the actual source of the leak. Insurance is dragging its feet on getting a structural engineer out to locate the source of the actual leak. Ineed somebody to please, coordinate with my restoration guy to come out and identify the source so we can do restoration. with all the bad weather we're having, the building is not getting any better.

I have a site plan, window and door details, electrical plan, plumbing plan, truss plan, roof plan, elevations and foundation plan. I need the remaining engineering/construction components for council approval. BIC certificates also. Property in NSW Australia.

recycled aggregate in concrete

Hi, I am looking for a civil engineer to inspect and then comment on a water intrusion issue at The Retina Institute. Neighbors have suggested that standing water on their property is a result of parking lot construction because it wasn't there before. A few professionals have commented on this thus far (engineer who designed, geographer, etc.) From my understanding, most if not all, have said the parking lot is NOT the cause due to the retaining wall and design.

House is damaged by a tree fall and we need an engineer to assess best way and what needs to be done to fix house back to the original condition.

I need structural analysis for load for new roof. The project is for my home at 1975 Mandeville Canyon Road Los Angeles CA 90049

We have a run off easement next to our home. I need to cover it or put a small bridge on top of it to have a driveway to access my new garage. I have attached a copy of the site survey.

Foundation plan and structural details of foundation.

I have an existing 8’x16’ structure on one end of a 40’Wx22’D concrete pad. It sits 1’ off the short (22’) edge of the pad and about 8” from the back edge of the long (40’) edge. I want to build a roof structure that would follow the roof line of the shed, be 8’ (front to back) and attach to a Pavilion type structure on the other end of the pad. The pavilion would be 12’ across the long edge and 14’-16’ across the short edge, mirroring the shed.

Urgent requirement for building surveyor to attend site alongside project manager and architect.

I need an expert for my project. Please DM, I'll share the details.