Embedded software is installed on electronics and hardware devices with the aim of ensuring control over the target object, item, or device.
Most businesses manufacture their products using electronic equipment and other machines. To ensure total control of the machine, device or object, one may consider leveraging the power of technology by installing Embedded Software. Such machines of devices could be operated from a computer or just by touching buttons. Embedded Software installations automate processes, increasing the productivity of the business and thus the profitability of the business as a whole.
Developers of Embedded Software are very resourceful and highly knowledgeable as far as such projects are concerned. Since businesses are trending towards Embedded Software installations, it is for this reason that professional proficiency in this area is gaining demand every day. Freelancers with prerequisite experience can offer their services using Freelancer.com. The free platform provides them an incredible opportunity to meet with various clients with whom they may strike a contract. It is for this reason that freelancers are advised to display on their profiles their proficiencies and experience in tackling such projects for them to gain an upper hand in this market.
|Write Raspberry PI 3 (BCM2837) hardware H264 decoder||I need H264 decoder for Raspberry PI 3 which uses its on-board Broadcomm chipset. The decoder must be implemented using MMAL/OpenMAX (Multi-Media Abstraction Layer) in C++ as the following abstract class implementation and must sit in single source CPP file. Implementer must override "decodeFrame" method. Attached test MP4 video you should be able to decode. Use libav to do demuxing. ...||2||C 编程, 嵌入式软件, C++编程, 树莓派||Jun 24, 2018||今天6天 20时||￥911|
|Develop firmware for ESP12-F (or similar)||Hello everyone. We are building a home automation product and are searching for someone to develop the firmware for the switches (1/2/3 gang) and maybe for a thermostat too. The more "exotic" requirement is that we want the communication to be local (LAN). So we have: 1. Initilization (SSID, password insertion) The switch creates a local network (the first time only). Our device con...||17||C 编程, 电子, 微控制器, 嵌入式软件||Jun 22, 2018||Jun 22, 20184天 9时||￥20389|
|thingsboard setup||We are developing an IOT project with esp32, 5-6 sensors , 4 relays. We are using thingsboard to monitor and display the data. Thingsboard is compiled and running on our servers. 2 Tasks have to be achieved here. 1. Whitelable the thingsboard by removing thinbsboard logo from the repository. 2. Make GPIO control button for the relays. Anyone who has experience with esp32 and Thingsboard can cont...||11||Python, 嵌入式软件, MySQL, MQTT||Jun 22, 2018||Jun 22, 20184天 7时||￥449|
|PCBA design verification & clarification on connection||We have developed a PCBA with a freelancer and unfortunately due to constraints he was not able to explain which connectors will be connected to which part of the system. We have the schematic file. We would need a clear idea on the design.||19||微控制器, 嵌入式软件, 印制板布局||Jun 21, 2018||Jun 21, 20183天 16时||￥205|
|Port Linux custom embedded O.S. from sunxi-linux to Mainline LTS||MOD Devices sells audio processors based on embedded Linux running in an ARM system-on-module. We are migrating platforms, from the Allwinner A20 SOM to a Freescale MX8. The job consists on the porting from the sunxi-linux 3.4 to the Mainline LTS kernel. The system is based on Buildroot. The configuration of the kernel includes applying the RT-patch and configure scheduling, systemd and USB-E...||6||Linux, 嵌入式软件||Jun 20, 2018||Jun 20, 20182天 7时||￥32266|
|PIC18 Project||Looking for simple PIC programming project||8||嵌入式软件||Jun 19, 2018||Jun 19, 20181天 17时||￥163|
|windows app to receive and send data from da14580 ble||I'm working on a project to make a windows app that would send and receive data from ble DA14580 without adding any extra bluetooth dongle to a laptop. It is a dialog semiconductor ble chip I'm using. once the ble pairs with the laptop, it must send data to a com port. also the ble will be sending the coordinates along with the data. so the app must also control the cursor of the laptop...||4||无线, 嵌入式软件, 微软, 视窗应用程序接口, 低功耗蓝牙（BLE）||Jun 18, 2018||Jun 18, 201815时 4分||￥746|
|SSI encoder reader software for Arm cortex||Software for reading encoder with SSI protocol is needed for ARM (prefably STM32F407G-DISC1 or EK-TM4C123GXL cards). A software for position reading in every 200ms (or more) for an SSI protocol with different brands and bits is needed.. The position information should be send with a common protocol (RxTx, I2C, RS485 etc.). Technical Details - SSI encoder position information with (a touch of butto...||6||电子, 微控制器, 软件构架, 嵌入式软件, 软件开发||Jun 18, 2018||Jun 18, 20189时 22分||￥1114|
|NASA Contest: Design a “Smart” Attachment Mechanism||Design a “Smart” Attachment Mechanism (no positioning capability) (SAM) In this challenge, you are asked to design a “Smart” Attachment Mechanism (SAM) that will be mounted to the free end of a separately designed robotic arm. The SAM receives all external power and high-level commands through its interface to the robotic arm, but implements the below functions autonomou...||2||一切, 电子, 工业工程, 机械工程, 机电一体化, 3D 设计, 航空工程, 航天工程, 算法, Arduino, 生物技术, C 编程, C++编程, Drones, 嵌入式软件, 工程, 制造设计, 产品设计, 产品管理, 机器人技术, 软件构架||May 31, 2018||May 31, 20183天 6时||￥9771|
|NASA Contest: Design a “Smart” Positioning and Attachment Mechanism||Design a “Smart” Positioning and Attachment Mechanism (SPAM) In this challenge, you are asked to design a “smart” positioning and attachment mechanism (SPAM) that will be mounted to the free end of a separately designed robotic arm. The SPAM receives all power and high-level commands through its interface to the robotic arm, but implements the below functions autonomousl...||10||一切, Arduino, 工业工程, 机械工程, 机电一体化, 3D 设计, 航空工程, 航天工程, 算法, 生物技术, C 编程, C++编程, Drones, 电子, 嵌入式软件, 工程, 制造设计, 产品设计, 产品管理, 机器人技术, 软件构架||May 31, 2018||May 31, 201817天 6时||￥26055|