工程制图 Jobs

I need a structural analysis of the snow load capacity for a dockmaster system used as a residential deck. This is for Meaford planners. Requirements: - Use Dockmaster specs and drawings - Provide written report about snow load capacity Ideal Skills: - Structural engineering expertise - Experience with residential decks - Snow load calculations knowledge - Detail-oriented and thorough in reporting

I need assistance from a fire protection engineer to get my fire alarm location drawings approved for submission to the city of Rochester, NY. Requirements: - Review current drawings and suggest necessary revisions - Provide an engineer's stamp for the approved drawings Ideal skills and experience: - Fire protection engineering expertise - Familiarity with city regulations in Rochester, NY - Attention to detail and good communication skills

I’m looking for an experienced AutoCAD drafter who can create complete technical drawings based on provided instructions, reference materials, and specific CAD standards. I have multiple projects throughout the semester and need someone who can produce accurate, professional drawings and deliver the required files on time. Current Project: Design 1 * Course: DRAF 135 – AutoCAD and Graphic Analysis * Deadline: October 20, 2026, at 11:59 PM Central Time * Deliverable: PDF generated directly from AutoCAD * Project value: 40 points Required CAD Standards: * Use the plot style. * Include a completed title block with all applicable fields. * Object lines: Magenta * Hidden lines: Yellow * Construction lines: Gray 8 * Center lines: Cyan * Text: Red, all capital letters * Referenc...

I need a qualified structural engineer to review and certify a small residential timber pavilion in Wandina, Geraldton WA. The pavilion is approximately 6.0 m x 3.0 m, with a 6.5 m x 4.5 m gable roof, 25° pitch, 8 perimeter posts, and no internal posts. The engineer will review: - Stability of the structure - Joinery and connections - Wind rating for my arera - confirmation of timber member sizes - post bases and anchors - beam/post, rafter and ridge connections bracing - wind and uplift design - footing sizes and reinforcement - consideration of the existing retaining wall and retained ground Requirements: - Must comply with Australian Building Codes - Experience with residential timber structures - Ability to interpret and work from detailed architectural plans

I'm looking for a skilled structural engineer to design a shear connection between two steel beams. The connection must support vertical loads and comply with AISC standards. Requirements: - Design a shear connection - Support vertical loads - Comply with AISC standards Ideal Skills and Experience: - Expertise in structural steel design - Familiarity with AISC codes and standards - Experience with shear connections and load calculations Please provide relevant work experience and examples of similar projects.

Necesito recalcular la estructura de concreto de un edificio comercial con el fin de definir un plan de reforzamiento seguro y eficiente. El trabajo consiste en: • Revisar la información existente (planos, memorias y cualquier ensayo disponible). • Verificar la capacidad actual de columnas, vigas, losa y fundaciones según la normativa vigente. • Identificar los elementos críticos y proponer soluciones de refuerzo apropiadas (por ejemplo, jacketing, agregado de elementos o cambio de sección). • Entregar una memoria de cálculo detallada, planos de refuerzo en formato editable (AutoCAD o similar) y un resumen ejecutivo con recomendaciones. Busco un análisis claro, bien fundamentado y que considere tanto cargas gravitaciona...

I need an experienced structural engineer to redesign shear walls for a new build. The current design is incorrect and needs to be fixed. Requirements: - Correct improper wall placements - Ensure compliance with International Building Code (IBC) Ideal Skills and Experience: - Expertise in shear wall design - Strong knowledge of IBC standards - Proven track record in structural engineering for new builds - Attention to detail and accuracy in load calculations and material specifications Please provide samples of previous work and relevant qualifications.

I have a backlog of roughly seventy-seven independent structural engineering items that I need to clear in the coming weeks. Each task is discrete—sometimes it’s a quick load check, other times a set of design calculations, a drawing revision, or a brief review of an existing report. While the workload is sizable, the individual assignments are generally small to medium in scope and can be tackled one by one. Here’s how I’d like to work: • I will release tasks in batches, always with a written brief, the required output format (PDF, DWG, or editable spreadsheet), and a target turnaround time. • You return sealed calculations, sketches, or marked-up drawings that are ready for client or authority submission, complete with your professional stamp where a...

I'm seeking a qualified professional to review modifications on an existing fire sprinkler system. Key focus areas: - Design Compliance: Ensure the current design adheres to relevant codes and regulations. - System Performance: Evaluate effectiveness and identify any potential issues. Ideal skills and experience: - Expertise in fire protection systems - Knowledge of industry codes and standards - Experience with system performance assessment Please provide relevant qualifications and experience in your bids.

I need a complete AutoCAD Plant 3D model built from the detailed drawings I already have on hand. Using those files as the primary reference, please generate a clean, well-structured model and then extract the following deliverables: • Vessel GA & frontal drawings • Fabrication drawings with clear welding and material call-outs • Isometric drawings ready for issue All drafting must stay fully native to AutoCAD Plant 3D so my team can open, review, and edit without conversion hassles. Keep layers logical, naming consistent with the source documents, and dimensions associative to the model wherever possible. I will supply the existing drawings the moment we start; let me know if you prefer DWG, PDF, or both. From there I’d like progress snapshots at key milest...

Temel ve İleri seviye Nx Cad eğitimi arıyoruz . Eğitim beklentileri aşağıdadır . Teklif verecek kişilerin cv ve ilgili dökümanlar ile birlikte paylaşmasını rica ederim . Fatura kesilmesi talep edilmektedir. Eğitim lokasyonu yüzyüze (Bursa) , diğer şehirler veya online olabilir. 1-Temel CAD Programi: Temel CAD egitimi kapsaminda, NX arayüzünün ve temel komutlarinin sistematik sekilde ele alinmasini beklemekteyiz. Halihazirda CATIA kullaniciları oldugumuz için, CAD mantigina ve terminolojiye hâkimiz. Bu nedenle egitimde NX'e özgü: * Sık kullanilan komutlar, * Araç çubukları ve pencere düzenleri, * Kullanışlı kisayollar ve pratik "trick"ler, * Verimli calisma yontemleri gibi konulara odaklani...

Mechanical / CAD Product Design Engineer - Smart Product Prototype Project Description HappyMat(TM) is seeking an experienced Mechanical / CAD Product Design Engineer to design the physical structure and electronics packaging for HappyMat Prototype #1. This prototype contains electronic and mechanical components that must be integrated into a durable, functional, and serviceable physical structure. Primary Responsibilities: • Design the physical mat structure. • Design electronics packaging. • Develop mounting solutions for the display, camera, sensors, LEDs, controller, wiring, and other modules. • Protect primary electronics from normal stepping loads. • Make the prototype serviceable. • Create CAD models and drawings. • Prepare designs for 3D print...

I’m installing a 16 ft × 12 ft cedar gazebo kit with a steel hip roof in Pasco County, FL, and I need a Florida-licensed structural engineer to issue a signed and sealed certification that the structure meets 139 mph, Exposure C per FBC 2023. The foundation is handled separately, so your focus is the super-structure only—every connection from the roof members all the way down to the post bases. Because this is a manufactured kit, experience certifying kit gazebos or pergolas is a must; ideally you have done this frequently and can move quickly. I will forward the manufacturer’s installation manual, connection details, and site specifics as soon as we start. Deliverable (PDF only): • Florida PE-sealed structural certification letter (and supporting calcs if ...

I have a steady flow of mechanical components that must be documented and visualised in both SOLIDWORKS and AutoCAD. For each part or assembly, I will supply basic sketches, reference files or change notes; what I need back are clean, production-ready assets created to the exact specifications. The work typically covers: • 2D mechanical drawings with complete dimensions, tolerances and call-outs in DWG/DXF and PDF • 3D part and assembly models in native SOLIDWORKS format (plus STEP/IGES for sharing) • Iterative design edits or redesigns when I submit red-line mark-ups or ECOs Your files must follow standard mechanical drafting conventions, use logical layer/feature naming, and open without errors or missing references. I rely on these deliverables for manufacture, so a...

I need an experienced AutoCAD/Civil CAD drafter to update and develop an existing industrial waterfront site plan in Norfolk, Virginia. I already have DWG survey/topographic files, a corrected site plan, hydrographic information, an impervious-area CAD drawing, and current aerial photographs. Work will include: • Organize and clean the existing CAD base drawing. • Develop accurate impervious/pervious area polygons and square-foot calculations for stormwater purposes. • Show revised internal access/roadway areas. • Develop a conceptual waterfront plan including a fixed pier, floating docks, finger piers, boat berthing and an enlarged end area that may accommodate floatplane access. • Add a conceptual crawler-crane operations area near the waterfront for a crane wit...