电机控制 Jobs

I need a PCB design for a Field Oriented Control (FOC) controller/driver, primarily intended for industrial automation applications. This controller will be used with Brushless DC motors (BLDC) and must incorporate CAN bus communication protocol. Key Requirements: - Design a robust and efficient PCB for FOC control of BLDC motors. - Integrate CAN bus communication protocol. - Ensure design meets industrial standards and can withstand harsh environments. Ideal Skills and Experience: - Proven experience in PCB design for motor control applications. - Strong understanding of FOC algorithms and BLDC motor dynamics. - Familiarity with CAN bus protocol and integration in PCB designs. - Experience in designing for industrial applications, knowledge of relevant standards and regulations. Pleas...

1. Main Controller • The board’s main controller will be a microcontroller from the Teensy 4.0 class. It must have sufficient processing speed and GPIO capacity. 2. Integrated ESC • The board will feature a built-in ESC for driving a brushless starter motor. • It must support a current capacity of ≥40A. • The ESC will be powered by a 3S-4S battery. (Minimum 11.1–14.4 V, Maximum 12.6–16.8 V) • The necessary protection and secure signal connections must be provided between the motor driver and the controller. 3. Glow Plug Output • The board will include a power switching output for the glow plug. • It must support a current capacity of ≥16A. • On/Off control is sufficient. • The glow plug will be powered by 3S or 4S volt...

Solicitud de presupuesto – Controlador DMX para 8 motores paso a paso independientes Hola, Estoy buscando desarrollar un controlador personalizado para instalaciones artísticas y motion control basado en motores paso a paso controlados mediante DMX512. La idea es desarrollar un dispositivo dedicado, robusto y reproducible, pensado para futuras instalaciones y sistemas cinéticos. Características generales deseadas: Entrada DMX512 Alimentación externa mediante fuente de alimentación 8 salidas independientes para motores paso a paso NEMA17 Capacidad para controlar los 8 motores simultáneamente e independientemente entre sí Cada motor debe poder recibir y ejecutar información distinta en tiempo real mediante diferentes ca...

I need a compact piece of software that will run a closed-loop control algorithm for an AC motor, using a Hall effect sensor as the sole feedback device. The firmware will sit on a microcontroller that is already wired to the motor driver stage; what’s missing is the logic that reads the Hall pulses, calculates speed and position error in real time, and then updates the drive signals so the shaft tracks a commanded RPM with tight accuracy. Here is what I expect to receive: • Well-commented source code (C or C++) that compiles with GCC/Clang, plus a makefile or project file. • A brief user guide outlining pin assignments, interrupt timing, and how to tune the gains. • A short test log (scope screenshots or serial prints are fine) proving the loop holds speed within...