Find Jobs
Hire Freelancers

Dynamic Analysis (Explicit) using FEA/FEM (ANSYS/LS-DYNA) Software -- 2

$250-750 USD

已取消
已发布将近 8 年前

$250-750 USD

货到付款
Using FEA, EXPLICIT dynamics, simulate a vehicle crashing into a fence (cable and post) system. The goal of this project is to determine the total penetration of the vehicle, past the fence line, due to the deflection/stretching in cables and any bending/rotation of the post and foundation. See attached detailed scope of fence system to be analyzed. -Must be able to simulate a crash of vehicle to cable post/fence and provide accurate results. Attached also, "Progressive Failure Simulation of Security Cable Barriers", is a VERY useful study paper on this type of fence and FEA software simulation.. -Please NOTE that this is NOT just a 3D modeling or an artist rendering project, It is a dynamic analysis/simulation mechanical/structural engineering project. This link shows an example of FEA cable/post crash. [login to view URL] The payments will be as follows; Milestone 1:- Truck hitting cables at 90 degrees with cables attached at each end (fixed point ends) and show/provide truck penetration and cable tension. This will be first compared to with actual crash test results. If results are comparable then we move on with the project to Milestone 2. If not, the project will be canceled. (20% of project amount if results match actual) Milestone 2:- Foundation and end bollard combination analysis. Truck hitting cables at 90 degrees with cables attached at each end to post (not a fixed point as the foundation and post may move or bend) and show/provide truck penetration. (50% of project amount) Milestone 3:- Truck direct hitting post analysis. (30% of project amount) -Note that the project may be canceled at any time if after a couple of attempts, the proper results are not provided or we feel that the freelancer does not have a proper understanding of dynamic/engineering analysis. -Provide your related experience and/or any examples of simulation projects you have previously done. -Also, please provide the number of days you will require to complete this project (without our review/approval time between milestones).
项目 ID: 10552582

关于此项目

18提案
远程项目
活跃6 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
18威客以平均价$987 USD来参与此工作竞价
用户头像
Hello sir, i have read the project details and understood the requirement. i have 20 years of experience in Design and Manufacturing. My expertise is -Product design (Electro mechanical, Automotive and Not Automotive) -3d modeling, 3d rendering, Reverse engineering. -Plastic mold design,Stamping die design, progressive die design, jigs/fixture. -SPM, Equipment,Machine building. -3d printing -CNC programming -Technical writing/Academic writing i worked on aluminium, sheet metal, plastic, wood, Acrylic and other engineering plastics. i have strong skill in Solid works, Creo,Catia, Autocad, Mould flow, Ansys. please have a look my profile and client review and let me know the if any. please send me the details. Thanks uday
$1,052 USD 在15天之内
4.7 (81条评论)
7.0
7.0
用户头像
Hello, I am a mechanical engineer with a lot of experience 20 + years. SolidWorks and Inventor work with since its inception. I am an expert on: - Sheet metal processing, - Injection molding of plastics, - Casting of aluminum, - CNC machining, - Ansis, SW Simulation and SW Flow Simulation analysis, - AutoCad, SolidCam and others. Important! The bid you see is only 20% from my real bid. The real bid is 2000USD. I want to do the first milestone work as a separate project. It is not need you to award me to start working. Just confirm and send me all requirements for your first milestons. Before awarding me I will send total deflection animation in Ansys ED. After this we will speak one more time. Your project in my hands is guaranteed. I hope you choose me. Greetings from Bulgaria! Plamen
$400 USD 在10天之内
4.9 (46条评论)
5.7
5.7
用户头像
Professional engineer with 39 years of structural analysis and 10 years of FEM experience....................................
$2,222 USD 在60天之内
4.4 (65条评论)
6.1
6.1
用户头像
A proposal has not yet been provided
$700 USD 在10天之内
4.7 (80条评论)
5.9
5.9
用户头像
please discuss 4 details >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
$3,000 USD 在35天之内
4.7 (17条评论)
5.3
5.3
用户头像
I`m Ph.D of Dynamics and strength of machines. I`m interested in working for you as I feel my skills and experience is what you are looking for. I have great skills and experience in ANSYS, APDL, CFX, Fluent, Solidworks, AutoCAD, ProENGINEER and Engineer. I also have a deep knowledge in programming languages such as Java, C ++. I have very extensive experience of Experimental study. I am confident that my qualification and education will suit your project. I am ready to start work for you now. Will provide progress reports every day. Will perform quality work on schedule your time. I have access to a cluster of 96 cores (Xeon), 384Gb RAM.
$450 USD 在10天之内
5.0 (12条评论)
4.9
4.9
用户头像
Hello I am expert of ANSYS,Solidworks and many other engineering software for the complete analysis of the object including stress,shear,strain and load analysis and generating report ,lets discuss...................................................................thanks
$333 USD 在10天之内
4.8 (30条评论)
4.3
4.3
用户头像
A proposal has not yet been provided
$666 USD 在7天之内
4.9 (20条评论)
4.3
4.3
用户头像
Dear Sir, My name Alaa Elsisi, I am using Ansys 8-10 years ago. I have experience with Dynamic analysis with Ansys/AUTODYN and Ansys/LS-DYNA. I will be happy if we can talk together, we can disscuss everything including the price. Thank You!
$833 USD 在10天之内
5.0 (10条评论)
3.7
3.7
用户头像
Hi, we are a two member team specialised in the fields of scientific computing and applied sciences. our skills that would come handy for this project are salome meca and code aster. Since both are open source and used for research purposes, there are no licence issues. Please visit my profile for more information. Regards
$555 USD 在10天之内
5.0 (3条评论)
3.3
3.3
用户头像
Im a professional in ANSYS and im CEO of Winsun Global Tech in Bangalore, India and i have my employees who are expert in ANSYS and im taking 100's of academic projects based on ANSYS and have 5 year experience in ANSYS and now i have 24*7 free time and use this time to delivery you on time and work hard to give you good service .
$777 USD 在30天之内
0.0 (1条评论)
0.0
0.0
用户头像
I can automate it in ansys 14.5 workbench or apdl and get the results with hand calculation validation. I have experience of crash and contact analysis and wouldn't require more of the support from the client end except a little.
$1,200 USD 在60天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have worked previously for simulation of vehicle crashing into stationary walls. I have given run for similar type of problem that you have described. I will be sending some sample results. Please provide me your mail id.
$750 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi, I am a passionate mechanical engineer with strong experience on Product Design & Development. Successfully completed 6 projects from concept-to-launch at an R&D centre. Strict adherence to NDA & ethics. I have a Masters degree in Manufacturing Technology & I am very strong in design fundamentals. The services offered include - 1. concept sketches - unlimited revisions 2. high-end CAD modelling 3. BOM & Material Selection 4. Manufacturing Process Consultancy 5. Technical drawings & high definition rendering 6. Reports & Documentation 7. 24x7 support 8. Expertise in Design & Simulation softwares. Since I am new to freelancer, I am determined to put in my best of creativity and make a name for myself here at freelancer.com. It would be great if an opportunity is given. Warm regards, Ananthakrishnan Design Engineer
$388 USD 在10天之内
0.0 (0条评论)
0.0
0.0

关于客户

UNITED STATES的国旗
Rockville, United States
4.9
31
付款方式已验证
会员自11月 3, 2015起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。