For this project I need to read 32 channel 12bit ADC Data at at least 100samples/second and channel and send the datastream over ICP/IP Socket to an PC. Saving the data on eeprom is going to be the next step.
The Idea is to use a PIC Microprocessor with 12 bit ACD (ie. ds30) and to achieve channel selection over external multiplexer (5 digital outputs needed to control the multiplexer).
in order to test the application, I will use the explorer 16 developement board with a ZeroG PicTail board.
I need the code and documentation.
The sysgetm will have a user interface with LCD & few push buttons for selecting i/p channel number, This selection will be stored in EEPROM for further use. The reading data will be sent via TCP stack.
In the past I used a PIC controller able to support the TCP/IP stack.
I developed the HW and FW.
I can supply SW written in C based on Microchip tcp/ip package revised by me.
If you like I can supply HW also, schematic, pcb or the complete module productet and tested.
Hi Nicolas..
I am an Embedded Systems Engg with 3 Yrs of Work Exp. I have worked on 16-bit PIC Microcontrollers and the ADC,TCP/IP,232 stuff.
Also please read PM
Hi,
I study master degree in robotic engineering and embedded system.
Experienced: ARM cotex M3,PIC6,24, TI DSP C2000,C5000 vv
ADC, SPI,DAC,QEI,vvv
I can work very well on your project