Find Jobs
Hire Freelancers

Design and Build a PCB with components to Drive a Servo Motor

$30-250 USD

已完成
已发布将近 7 年前

$30-250 USD

货到付款
I am looking for an experienced engineer to design and implement a very small system to drive a servo motor. I have used off-the-shelf components to build the system but now need a low-cost solution to integrate everything on a single PCB. The system will perform two activities: (1) drive a small servo motor ([login to view URL]); and (2) turn on a small LED. The system should have the following parts: (1) battery; (2) Arduino controller; (3) servo motor; (4) LED; (5) push switch to turn it on and off, and (6) a microUSB charging port for the battery and a microUSB data port for Arduino (if can't be shared). Right now I use Pololu's A-star 32U4 micro controller. You should design a PCB board that likes a-star 32U4, not much larger than the a-star 32U4, and connects to all components through connectors. Soldering should be minimized. Space is an important constraint to satisfy. Thanks for bidding.
项目 ID: 14004891

关于此项目

31提案
远程项目
活跃7 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
bid updated
$100 USD 在5天之内
5.0 (7条评论)
3.5
3.5
用户头像
Project Details Statement of work: • Create Schematic and board layout using Altium Designer Milestones: • 100% of bid amount upon project completion Communication: • Daily updates provided on project status Design Phase with expected time (working days) to completion: (3 days) • Create Schematic and board layout • Send schematic pdf for review and make required changes • Complete Board Layout with approved schematic Completion • Deliver BOM, Gerbers, Altium Design files, and pictures of schematic and layout Previous Freelancer work was to design an Arduino 2560 compatible system that could measure rotating spindle speed of a shaft and provide Bluetooth support More previous examples of work can be provided Please contact me for further discussion My Name: Brad Bas Location: London, Ontario, Canada Education: Electronic Engineering Technician and Technologist Work: 26 Years experience Embedded System Design completing electronic projects for Railway equipment to custom robotic machinery. Design and build from concept to prototype to production delivery
$150 USD 在3天之内
5.0 (3条评论)
3.3
3.3
31威客以平均价$164 USD来参与此工作竞价
用户头像
Hello dear I have experience in designing electronics circuits and can make your project. I will make your project practically on breadboard and will provide you circuit, code and PCB design along with gerber files. I will design your project using extra cheap and reliable components that will be beneficial for you if you are planning to make a commercial product.I also have experience in bluetooth modules and android apps development. I can also develop android app for you that will be able to control your project and you will be able to monitor your data. If you wish we can discuss in chat.
$200 USD 在3天之内
4.9 (36条评论)
6.5
6.5
用户头像
Hi Sir, We are professional PCB designers. we can design you not only the very nice but very miniaturized and smart PCB that will suit your job to the best. We do our jobs in Eagle and Altium. We are expert in using such software. we will give you gerber files and BOM. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professional with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits in Shenzhen China for excellent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company
$90 USD 在5天之内
4.8 (48条评论)
6.5
6.5
用户头像
Hi, I hope you are doing well. I have expertise in PCB design and development. I have developed atmega32u4 based integrated battery management projects. I would like to discuss the project in more details. Looking Forward, Khawaja
$250 USD 在3天之内
4.9 (67条评论)
6.4
6.4
用户头像
Hello...! I have experience design this project. Please contact me and we will discuss more. Looking forward reply from you. Have a good day..! Regards,
$150 USD 在3天之内
5.0 (20条评论)
5.9
5.9
用户头像
A proposal has not yet been provided
$166 USD 在3天之内
4.7 (60条评论)
5.9
5.9
用户头像
FREELANCER RECOMMENDED ------------------------------------------------------ Can help... I am an Expert... Lets Start! Please start a Discussion with me and we can get started from there... Please check the past projects I have handled and check my reviews for what employers have to say about my work... Can start right now...
$155 USD 在3天之内
5.0 (9条评论)
5.1
5.1
用户头像
hello. I am electronics engineer and professional PCB designer. I would like to do this for you. we have to finalise schematic first. let me know if you want to discuss your design. thanks.
$222 USD 在15天之内
5.0 (10条评论)
5.1
5.1
用户头像
hi there! Just confirming few points, Will you need (a) 2USB ports? (b) a charging circuit for the battery? (c) What would you push switch control? The LED/servo/ or switch the whole device itself? Thank you, I am fine with the size you request, i.e. 1″ × 0.6″, but need to review based on your recommendation for a charger circuit.
$250 USD 在7天之内
5.0 (14条评论)
4.7
4.7
用户头像
Hi, Can you share your complete project requirements and BOM of your previous prototype(which to be reused)? About us: Micro-controllers we have worked on PIC, STM32, PSOC and AVR. Development kits and instruments available for testing purpose. For PCB designs we use KICAD. C#, LABVIEW, Python for GUI, Controlling or Datalogging purpose. Thanks and Regards, Santosh
$222 USD 在8天之内
4.8 (5条评论)
4.0
4.0
用户头像
Hello. I undersatand your task. Microcontroller only 32u4 or I coud use mega328 for lower price. And What capacity of bettaries you need? It will be li-po or 18650 li-ion? I have lot expirience in pcb design and already worked with servous and this controller I coud do it fast and quality. Thanks.
$80 USD 在3天之内
4.7 (14条评论)
3.9
3.9
用户头像
Hello, I am a Mechatronics Engineer, ready for your job sir, using latest software of pcbs making like EagleCad, Proteus and Altium, Do you need it a normal Pcb or double Layer or as Arduino Shield or microcontroller integrated in it, to be sure it will be ready before the 3 days, but 3 days is enough for discussions, Thank you, hope to win the job, and don't pay till it finished, Thank you.
$166 USD 在3天之内
5.0 (2条评论)
2.9
2.9
用户头像
Hey there, I have a very good experience in pcb design and have been working on it past 2 years and have created many projects.I have read your description i can complete your work. If interested message me so that we can discuss it further.
$100 USD 在3天之内
4.3 (4条评论)
3.2
3.2
用户头像
I’m a young engineer , working in electrical engineering and electronics industry. Embedded programming of Atmel microcontrollers' since 2015. Development of applications in C++ Java, MATLAB. Good experience in programming for Arduino, Raspberry Pi and usage wide range of sensors and devices. I work with an Engineering outsourcing firm founded by a group of young and talented engineers with vast spectrum of experiences and knowledge pertaining to Electronics design. we offer a diversity of expertise in all areas of Engineering and Industrial Manufacturing with the best prices on the market
$75 USD 在7天之内
5.0 (2条评论)
2.2
2.2
用户头像
its an easy and cheap project i will do it within minimum time for you and with the cheap rate its not such an expensive for which you are paying big amount what ever driving angle may be multi iwould do it for you
$66 USD 在2天之内
0.0 (0条评论)
0.0
0.0
用户头像
I am hardworking electrical engineer I do the projects for the sake of my own interest , as I love to make electronics stuff.i would love to do your project and will deliver you with your requirements and on time.
$133 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear sir You will get a complete set of technical documents including but not limited to, schematic, layout, gerber and excellon files. You will get technical assistance during and after implementation and test phases. Any remarks from your side will be considered with high importance. My main goal is your complete satisfaction. Dr. Eng. Aladdin Assisi
$155 USD 在5天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello! My name is Jackie. Currently, I am working as a hardware designer. I have joined many projects to design schematic and lay out PCB, such as: design development kit based on MCU 32 bit AT91SAM9G20B-CU and MPU A20 within NAND flash, SDRAM, Micro SD Card, Bluetooth module and Power supply unit. I am good at Altium, Allegro and have much experience of designing electronic circuit so I make sure to finish your project well. Do not hesitate to contact me. I am looking forward to hearing from you.
$133 USD 在5天之内
0.0 (3条评论)
0.0
0.0
用户头像
Iam an electronics engineer from india. I have done some projects for research and development. I have done research document on 5G and also many projects on aurdino and iam perfect at soldering and good at micro soldering. I have done many projects with aurdino and also conducted workshops on it. I have work experience in a company for short time that to when iam pursuing my graduation, i have worked for a research IOT project. Now iam pursuing my graduation final year, but also i do some real time projects.
$155 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have years of experience with designing circuits and developing PCBs. This project should not take more than a couple of days.
$277 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello! I have a good understanding of similar projects. I think still need to add a battery charge controller. You can discuss the details and begin. I'm ready!
$222 USD 在3天之内
0.0 (0条评论)
0.0
0.0

关于客户

UNITED STATES的国旗
Short Hills, United States
5.0
20
付款方式已验证
会员自5月 3, 2006起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。