Find Jobs
Hire Freelancers

Design PCB

$250-750 USD

已关闭
已发布大约 7 年前

$250-750 USD

货到付款
Raspi3 Comute Modul IO Board needed. There are design files of Raspi IO (CMIO) Board on the internet. Some modules should be on the needed board. 1xAudio, 2xUSB, 1xDSI, 1xRS232, 1xRS485, 1xHDMI, 1xEthernet, 1xRTC.
项目 ID: 13334518

关于此项目

23提案
远程项目
活跃7 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
23威客以平均价$522 USD来参与此工作竞价
用户头像
Dear Sir, If you are looking for an highly skilled hardware engineer, I believe that I am the one who you're looking for. I am also an experienced PCB designer who has over 16 years design experience on complex PCB design. I can provide you with design service from schematic entry(circuit design) to PCB layout. I can help you prototype the PCB. Please message me if you are interested in my service. We can talk more. I would not disappoint you if you select my service. EDA Tools--ALTIUM DESIGNER16, orcad, PADs, Eagle Thanks!
$600 USD 在10天之内
4.9 (116条评论)
8.3
8.3
用户头像
Hi Sir I am an expert PCB designer I have more than 8 years of experience in this field. Please get in contact I have a few questions to discuss before we start working Regards
$600 USD 在10天之内
4.9 (253条评论)
8.0
8.0
用户头像
Hello. I'm a PCB designer/ electrical engineer. You may check my qualification in the profile. I prefer to work in Altium Designer. We can discuss any details about project in the chat. Will do my best, Viktor.
$250 USD 在20天之内
4.9 (212条评论)
7.6
7.6
用户头像
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, EEprom. UART ,Protocols for networking, wi-Fi routers, Electrical vehicles and AC drives controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$888 USD 在20天之内
4.9 (60条评论)
6.7
6.7
用户头像
Hi Sir, We have read your project and we can do it for you if you agree on our rates. We offer our services at very feasible rates. Please discuss with us in details. We are team of developers and engineers professional in designing electronic circuit solutions, pcb designs, database programming such as MySQL etc, software designs and GUI/UI development, android applications, integrating software and hardware and providing complete solutions. In this bid, we offer you our solution at very low and affordable rates based on your desired requirements. we normally follow several checks to ensure the quality of service and products. In this bid prototyping is not included, if at certain point you would like to have prototypes manufactured, we can provide you at minimal cost including courier charges (DHL/FedX etc). We, very humbly deal with our clients and provide technical support to them during all phases of project execution. We are very much looking forward to hear from you in coming days. Cheers, Ahmad Lead Technical Engineer Turktronics Inc. An Internet of Things Company
$250 USD 在15天之内
4.8 (43条评论)
6.7
6.7
用户头像
Hello! I am interested in your offer! I have experience in PCB layout (over 10 years in Altium Designer, Eagle CAD, OrCAD and others) for power electronics with microprocessors PIC (microchip), AVR (ATMEL), Arduino, STM32 (STeleсtronics) and others. I recently registered here, and willing to work for a small cost, because I need to improve the rating. Examples of my work you can see in the portfolio Waiting for your reply. Best regards, Denis Mark.
$250 USD 在10天之内
4.7 (39条评论)
6.5
6.5
用户头像
Hello, your project is interesting for me, I had deals with Raspberry's Compute Module, and further more, have designed a custom Main board for it. I think, I can help you to create your device. I have experience in PCB routing using different CADs. For other details, contact me, please. Wish you a nice day!
$400 USD 在30天之内
4.9 (16条评论)
5.0
5.0
用户头像
A proposal has not yet been provided
$833 USD 在20天之内
4.8 (6条评论)
4.6
4.6
用户头像
Dear Madam/Sir, I am an experienced electronics engineer who worked on embedded systems for several years as a full-time employee as well as a freelancer. I am doing my master's degree at a Canadian university in Electronics Engineering. If you send me a message here, I will send you my detailed resume in PDF format which contains the list of the projects I've worked on (since on Freelancer.com I can't start a chat). Sincerely yours, A.H
$500 USD 在17天之内
5.0 (3条评论)
3.7
3.7
用户头像
For a very long time i am working on PCB designing software also analog, digital, single layer & multi layer. I am very confident to complete your job within time. If you want i can develop your software on any platform like as Arduino pre loaded boot loader chip, PIC C compiler or any other plat form. Please feel free to contact me about any. Waiting for your valued reply.
$666 USD 在8天之内
5.0 (2条评论)
2.0
2.0
用户头像
Hello, I can work for you to make R-Pi3 Add-on board as per your requirement. I am Hardware Design Engineer with 4 years of experience. I have Extended expertise in working in Design Electronics equipments based on customer requirements. Hands on experience in designing analog and digital hardware. Experience in component selection costing & BOM generation PCB Design Tools : Allegro16.6
$277 USD 在15天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, We are a team of embedded hardware and software professionals with experience in Circuit design, schematic and PCB layout. Would like to know more details about the project. Looking forward to work on this project. Please feel free to contact us for any further discussions. Thanks and Regards EmWorld
$500 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
I already created the compute board design previously also. Worked on the RS-232/485 transceiver. Knows everything about the compute module of pi. Feel free to contact me anytime.
$500 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
I am best in PCB design
$666 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
I'm trying to make my first project bid here. I've never done a project on freelancer. I believe that if I can land this project it will be a kick start for my upcoming jobs. I have experience in designing high speed boards and the project will be delivered on time.
$277 USD 在12天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, I have good experience in product development from start to mass production. Ready to help you with electronics and design. Best regards, Ivan
$444 USD 在14天之内
0.0 (1条评论)
0.0
0.0

关于客户

TURKEY的国旗
celikada, Turkey
0.0
0
付款方式已验证
会员自4月 11, 2005起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。