Altium Schematic and Layout services for IoT device -- 2

Hi, I have worked with the STM M0 ( STM32F072) and M3/4 series, plus I have been working with various BLE chipsets. I am also doing quite a lot of work with led control, so I have most knowledge of most of the asepects you are dealing with. As well as my profile here you can check me out at elance [login to view URL] Also at [login to view URL], and [login to view URL] for which I did the electronics of the genie. Happy to discuss furthrr by skype if required. skype: palmanz Kind regards Marc

Dear Sir, If you are looking for an highly skifull hardware engineer, I believe that I am the one who you're looking for. I am an experienced PCB designer who has over 14 years design experience on complex PCB design. I can provide you with design service from schematic entry to PCB layout. I can support your PCB fabrication/prototype. I am also an skillful soldering worker. See my porfolio please, those are part of my handwork. Most of my designs are ARM-Based Platform and FPGA boards, ucontroller/RF Boards. Good working records can be found in my feedbacks. I am using Altium Desinger 14 Please message me if you are interested or want to learn more. Thanks!

Hello, I have been associated with Hardware design (Circuit / Electronics design), PCB design, PCB Manufacturing, Component procurement, PCB Assembling and Functional testing for over 7 years. I have used various CAD/EDA tools for PCB design. I'm having good experience in Altium designer. I will provide the PCB Manufacturing, Component procurement, PCB Assembling & Functional testing services too. Thanks & Regards, Karthik

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in products design like Bluetooth based communication ,LED drivers and other MCU based products. I am excellent in codding using controller like pic,dspic and other controllers. I will help you for this task.

Hi. I have experience in similar developments. Please contact me to discuss the details of the project. May be unable to perform the work for fewer hours. I am ready to support your design Kind regards, Anatoly

Hello, I would like to offer my help with your project, possessing the required skills and experience. I believe to be expert in sensory, analog, RF, digital and power electronics design as well as embedded firmware. My design work is based on formal correctness, manufacturabilty, lowest power and cost. Swiss citizen, having spent 9 years in Silicon Valley working with Steve Wozniak (of Apple fame), then consulting to various clients, I now reside in Italy. For electronic design I use PSPICE, Protel/Altium, 8051 variants, ARM Cortex, and many other uC's. I have a long track record of embedded firmware development, detailed knowledge of the STM32 line and the Nordic nRF51xx chips, as well as the ST MEMS accelerometers. My skills include mechanical prototyping, sourcing, interaction with industrial designers and mouldmakers, sourcing, certification, production set-up and follow-on with contract manufacturers both local and Asian. I enjoy guiding people through the design and development process. More portfolio projects as well as my CV are at your disposal My bid is not final, open to negotiations. I am prepared to work on a time-and-material or flat basis, TBD once detailed project specs are worked out. Thank you for your time, with kindest regards Alfredo Knecht

I have BS, MS and PhD degrees in Electrical and Electronics Engineering from one of the most reputable universities in Turkey and have 15 years of analog and microcontroller based systems design experience (both hardware and firmware) and 5 years of RF design experience. I am founder and manager of an R&D company focusing on analog and embedded systems design. I have extensive experience with schematic and PCB designs from various fields including analog, digital, low-noise and power. I have designed up to 6-layer boards with DSPs. Please check my portfolio where I present some of my work. I can help you in: - concept development and systems design, locating possible future problems before they appear - schematic design - PCB layout design - firmware development - FCC/CE certification and designing the circuit with these tests in mind, from the beginning, so as to minimize the certification effort.

G'day, I'm an Electronics R&D Engineer from Sydney Australia and I specialise in design for Manufacture. I have 25+ years experaince designing for Manufacture and I have been using Altium (Protel) since 1987 so I am VERY familair adn proficient with it !! I am quite interested in your IoT movement sensor, and I have used the Nordic nRF IC's and module before, as well as many ST Micro devices... I would like to chat more about it with you to see if my skills and your project are a match ;) I've bid my lowest ever rate/hr as I want to get some postive feedback and more recomendations for projects on here ( and compete with other countries lower wages) as I dont do a lot of freelancer work, as I have other work I do, but I am available for upto 20hrs per week to get your project completed and delivered... Cheers from Sydney, Darren

I have experience of 16+ years of Schematic design , Firmware development , PCB design & PCB manufacturing process. I expert in arduino and PIC microcontroller embedded system. I also expert in PCB design. I currently Altium Designer 10/Cadence Allegro/Fritzing/Proteus VSM/Eagle/Kicad/Orcad 10/AutoCad 2013 Electric/Solidwarks 2013 user design software. Let discuss more. I also looking for long term relation Below is the project list that we involve : - Low cost PIC microchip development board -1 board - Lost cost Atmel development board - 1 model - UPS 600 Watt and 1200 watt - 2 model - Recorder- system - 6 model - Navigation-system - 50 model(Military/aerospace- Honeywell) - Microwave oven. - 20 model ( Samsung/GE Electric ) - Arduino board - 5 model - PLC - 1 model Lets discuss .... **I currently Altium Designer 10/Cadence Allegro/Fritzing/Proteus VSM/Eagle/Kicad/Orcad 10/AutoCad 2013 Electric/Solidwarks 2013 user design software. Approach to the Job: We do support electronic design till mass production activity. Please refer attachment for our portfolio

Wow! I think I may be a good candidate for this one. I have over 5 years experience designing professional electronic projects. I have done several professional project from client concept as well. I use Altium Designer for PCB designing. Please see my portfolio to see some of my recent works. I have also designed couple of nRF chip based designed. I always consider whether it is RF or High Speed or Power electronics PCB, because each type of them requires specific attention while laying out the traces. I could do project very quickly yet still provide professional, reliable results with free technical support after delivery. So give me a holler and we'll see what I can do. Regards, Rahman

Hi, I have read and understood the project guideline, so you can trust my sincere indulgence both in quality and time frame. I have done similar projects in the past. I will like to use my experience to serve you better. If you will give me a chance, I will ensure that you're satisfied. I'm sure we can work together. Please reply, let’s discuss further. A trial will convince you. Thanks

I designed several PCBs before. I guarantee that you will be satisfied the product. But I need detailed information about that. Also currently I don't have an Altium license. I'll need that.

Hello, I am a Hardware and Firmware Developer cum Schematic/PCB Designer, having 9+ years of experience. PCB/Schematic design expertise in Altium, Proteus, Eagle. Expertise in Arduino, AVR, PIC, 8051 programming. Also having expertise in using Simulators. This project's duration will depend upon the work to be done. I want to discuss further details. Thanks Sapna Surve

We are doing PCB Design Service as main scope along with customized project assistance from schematic draft (in orcad, altium, Power logic), BOM generation, component sourcing, PCB Design, PCB fabrication, Assembly and testing. If I get an opportunity we can together excel in developing your requirement. Waiting to answer your more quires if any... Have a nice day!