Find Jobs
Hire Freelancers

Beaglebone Black - PCB/SChematic in Eagle

$750-1500 USD

已关闭
已发布超过 7 年前

$750-1500 USD

货到付款
I am seeking someone to convert OrCAD/Allergo PCB/Schematic files to Eagle (7.0+) for Beaglebone Black See here: [login to view URL]:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28C.29 System Reference Manual Rev C.1(PDF) Schematic (PDF) Schematic (OrCAD) BOM (xls) PCB Files (Allegro and Gerbers) 6 layers PCB. The goal is to be able to utilize the larger board (6" wide by 3.5") that will allow me to add the circuits (RS232, USB, special interfaces, etc.) to the board without the use of expansion boards. I'm an engineer - and can help you on getting the job done right. I will provide the proposal rough sketch for preparing for the PCB board design. Looking forward to hear from you soon.
项目 ID: 11995091

关于此项目

23提案
远程项目
活跃7 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
23威客以平均价$1,067 USD来参与此工作竞价
用户头像
Dear Sir, If you are looking for an highly skilled hardware engineer, I believe that I am the one who you're looking for. I am an experienced PCB designer who has over 15 years design experience on complex PCB design (Arm Based/FPGA/Analog/Digital/RF/BT/WIFI/IOT....). I can provide you with design service from schematic entry(circuit design) to PCB layout. I can help you prototype the PCB. I have experience on convert BBB to altium or PADs. Of course I can do that in eagle 7.0+. and I use eagle 7.6 Select me and I will not let you down. EDA Tools--ALTIUM DESIGNER16/ PADs/ORCAD/EAGLE Please message me if you are interested in my service. We can talk more. Thanks!
$1,250 USD 在20天之内
4.9 (114条评论)
8.5
8.5
用户头像
hi I am an expert electronics engineer with more than 8 years of experience in PCB design. please get in touch to get started I am waiting for your reply to start regards
$750 USD 在3天之内
4.8 (243条评论)
8.0
8.0
用户头像
Hi, I am a post graduate power electronics engineer and having very good industrial experience of 8+ years in R&D and project development. I am excellent high frequency transformers design, circuits design, multi-channel LED Drivers, Regulated power supplies design with universal input to DC output, Audio amplifier, drives design, Filters design for harmonic analysis and Power factor correction, SMPS, LED drivers, DC-DC, AC-DC converters design, PFC interleaved boost converter, Battery management system, Battery chargers, UPS design, sine wave Inverters, solar grid tie inverters, Solar battery chargers and street light systems design from few watts to KW range using Buck, Boost, and Buck –boost, Interleaved boost/buck, Fly back Push Pull and H-bridge inverters. I have work experience to design from few watts to KW range meeting all compliances like EMI/EMC and safety standards UL etc.
$1,555 USD 在35天之内
4.9 (52条评论)
6.7
6.7
用户头像
Hello, Have a great day. I am running a setup for developing Electronic devices. We will do PCB layout in EAGLE CAD ver 7 or higher. Please feel free to contact us. Regards, Shahbaz.
$1,500 USD 在30天之内
4.6 (60条评论)
7.1
7.1
用户头像
Hi, I am an electrical engineer with more than 10 years experience in circuit and PCB layout design. I have designed approx 35 different boards for various applications. I use Eagle and OrCAD for schematic and PCB layout designs. I am interested in this project and would like to discuss details. Best Regards
$1,500 USD 在20天之内
4.8 (27条评论)
5.8
5.8
用户头像
Dear Valued Employer, My name is Martin Botsov and I am an engineering physicist with extensive experience in the field of circuit design, circuit prototyping and PCB design. I would allow myself to emphasise on my vast experience in the field of audio circuit design. As I understand from the project description you are looking for an electronics engineer capable of transfering an already existing OrCAD project to Eagle environment according to all stated requirements. So, without further ado here's how the workflow would look like, if you happen to choose me as a partner for your project: 1. Initial discussion 2. Review of existing design 3. Component library creation 3.1 Schematic symbol library creation 3.2 Footprint library creation 4. Transfer of schematic drawings 5. Review, check and verification of schematic drawings 6. Layout design 6.1 Components placement and arrangement 6.2 Review of proposed layout design arrangement 6.3 Components routing 6.4 Review of final layout design 7. Design rule check, verification and validation 8. Production files (GERBER, NC DRILL, BOM, ASM, PICK & PLACE, SCH) Your project will be carried out on Eagle. Don't hesitate to contact me with questions regarding any details around your project. You could also check out my profile on Freelancer and LinkedIn for more details around my professional experience. I am looking forward to hearing from you soon. Thank you for your time. Kind Regards Martin Botsov
$1,490 USD 在42天之内
5.0 (16条评论)
5.6
5.6
用户头像
I can do the job that requires, I have enough experience in eagle, to do what I have worked requires up to 8 layers with eagle
$755 USD 在7天之内
5.0 (25条评论)
5.4
5.4
用户头像
Hello Sir, I am electronics engineer and experience in designing PCB using Orcad, Eagle and Altium. Kindly discuss details of what you have in mind to add to beaglebone board.
$1,055 USD 在20天之内
5.0 (11条评论)
5.3
5.3
用户头像
I can do your job.
$833 USD 在30天之内
4.8 (6条评论)
4.6
4.6
用户头像
OK, for sometime I am doing this short of solutions BBB,Arduino expansion boards instead 0f developing new boards from scratch which I had been doing for three decades. Please go throgh my profile and communicate if you are interested
$1,250 USD 在20天之内
5.0 (12条评论)
4.5
4.5
用户头像
Dear Client, Hope you are doing great. Thanks for the project post and providing an opportunity to bid. It is my immense pleasure to submit my proposal for this project as I am a skilled Electronics & PCB designer with more than 6 years of experience. I have appropriate knowledge and experience in Electronics and PCB designing. I can work on designs based upon new ideas, reference schematic and re-engineer circuit based upon actual PCB pics. I can support a Electronics/PCB design project from Idea/innovation/design/development/manufacturing/prototyping/production perspective. I have worked upon several projects which includes MCU interfacing, sensor designs, accelerometer and Gyro designs, GPS/GSM designs, RF designs, Bluetooth (BLE2.0, BLE, etc), custom XBEE design, actuator interfacing, amplifier design, audio codec, memory units, USB/FTDI interfacing, battery/power management and many more similar projects. As per my understanding, scope of this project is to design PCb files in Eagle CAD. I have worked upon custom Beaglebone boards in past. I am confident to help you on this project. Kindly provide further details regarding the project. Design step will have schematic import in Eagle CAD. After that optimized routing will be done, Gerber Files will be generated and prototyping will done and shipped. The deliverable will include source files, schematic and layout, BoM and Gerber data. Kindly respond for work reference. Kind regards, Amit
$990 USD 在20天之内
4.6 (4条评论)
4.3
4.3
用户头像
1 ) I have over 10 year experience of PCB Layout / Hardware / EMI / Firmware designs, we can complete various design and layout requirements. # 8051’s MCU / Embedded system / Arduino / ST32F / AVR etc # WIFI / BT / BLE / GPS # LCD / DTV / MD / Web Camera # LED / Lighting # LCD Inverter / Touch ... PCB design and layout. 2 ) I can use as below to design and layout. # Altium Designer / Protel99SE # Eagle # PADS # KiCad # OrCad (Schematic) 3 ) I can communicate well in English, please contact us by e-mail or Skype me (saludpcb) to find out relevant details. 4 ) I also have to provide PCB layout design service ( super low price ) # For PCB layout: 2 ~ 4 Layers -> $0.4 ~ 0.6 USD per pad, 6 ~ up Layers -> $0.6 ~ 0.8 USD per pad. # For reprinting of schematic and component, quotation will vary by each case. # A minimal of $100 USD 2L / $200 USD 4L / $300 USD 6L will be charged for each case. What I can do are: # 1,2, 3, 4, 6, 8, .... layers ( PCB / FPCB ) # High Speed and High Density PCB layout # Differential Signal PCB layout # RF Signal PCB layout
$833 USD 在20天之内
4.9 (6条评论)
4.0
4.0
用户头像
Hi Our team has many experiences with Beaglebone Black and PCB design. We are interested in your project. See you soon Regards UZelectronics
$1,000 USD 在19天之内
5.0 (2条评论)
0.8
0.8
用户头像
I have Been Working in designing Single and Multiple Layer PCB for Commercial Applications ,Which Includes Hydro Power Governing Control Systems,Paper testing System,Wifi Enabled IOT System and Various Motor Control System(FOC and V/F) in Low Power and High Power(10W @ 24V to 20KW @ 72V). Expertise in Altium Designer 15 & 16 , Eagle and ORCAD
$1,250 USD 在20天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have 16 years of product design experience in various design aspects from PCBs to enclosures. My experience includes mixed signal circuit design, including power supplies, microprocessors, audio signals and amplifiers; this includes layout of mixed signal PCBs from 1 to 8 layers. I have written firmware various microcontrollers including TI Tiva, PIC, MSP430 and Arduino. I have design PC applications to communicate with the microcontrollers and server applications to interface between an embedded Linux client and an SQL database. My experience includes designing enclosures for various assemblies and sensor housings. Many of the designs I have worked on include requirements EMI/EMC testing, shock and vibration testing and environmental testing including temperature, humidity, and IP rating. I have had to design for these test, specify what tests need to be performed and design the fixtures for theses test.
$750 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi, I´m just searching for earn my own experience, I am an engineer from Spain, I have experience with eagle but not with this complexity boards, I really wish colaborate with you. My proposal may include a functional prototype instead part of the money. Best regards.
$777 USD 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
I am a PCB Designer. I have knowledge and experience of electronic and PCB ( Printed Circuit Board), PCB design, electronic cuicuit, hardware, PCB layout, gerber and fabriation, RF circuit, high speed design. I usually design PCB proficiently with these software such as: - Pads Logic, Pads layout, Pads Router (Mentor Graphic v9.5) - Eagle 7.7 - Orcad and Cadence Allegro 17.2 - Altium Designer 16.1 - Protues 8.5 Hire me and I will try my best for your satisfaction.
$833 USD 在41天之内
0.0 (0条评论)
0.0
0.0

关于客户

INDONESIA的国旗
bandung, Indonesia
0.0
0
会员自5月 19, 2014起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。