Find Jobs
Hire Freelancers

custom soundboard/led driver board for lightsaber

$30-250 USD

已关闭
已发布大约 8 年前

$30-250 USD

货到付款
Yes I'm planning on making my own custom led driver/ sound board for my son's and daughter's lightsabers that Im starting to build. The led driver needs to have a extension/ retraction (scrolling) effect for the led 8 string/channel blade on power up and down with fade in/out for each led segment/channel in sequence. A static shimmer / flicker or candle effect, a flash on clash effect. These need to be synced with the soundboard that can be programable with a power up/ down sound font, an idle hum sound font,3-4 random swing effects sound font triggered by a swing/ motion sensor( for up down and side to side swings), and 3-4 random clash effect sound fonts triggered by the clash/ vibration sensor. as well as 1-2 accent led pads. and have a micro sd card slot for loading/saving other sound fonts. I plan on using 4AA batteries at 6 v or a lith ion recharge pack at 7.4v. Im not use to this kind of electronics and only have use of one hand so I need some help/ direction/ comissioned builder and need to know what exactly I need to do to get this made. Please help Thanks
项目 ID: 9214908

关于此项目

11提案
远程项目
活跃8 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
11威客以平均价$215 USD来参与此工作竞价
用户头像
Hello! I am interested in your offer! I have experience in programming and pcb design (over 10 years) for power electronics with microprocessors PIC (microchip), AVR (ATMEL), STM32 (STeleсtronics) and Arduino's. I recently registered here, and willing to work for a small cost, because I need to improve the rating. Examples of my work you can see in the portfolio Waiting for your reply.
$150 USD 在3天之内
4.7 (43条评论)
6.8
6.8
用户头像
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in LED drivers design for different applications. I designed sine wave inverters for standalone and grid tie Inverters and projects like Off line UPS up to 3 KVA, emergency light of 66W and Online UPS control cards, LED drivers with active PFC from 10 W to 150W, SMPS, Power supplies. I am ready to work for you. Please contact for further discussion.
$250 USD 在10天之内
4.9 (53条评论)
6.7
6.7
用户头像
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL, Logisim) 3. Digital System Design (Verilog, VHDL, Logisim) 4. Controllers (8086 processor, 8051 Family, Arduino, PIC Family) 5. Power Electronics (PSIM, MATLAB, Orcad, PSpice) 6. Control of Electric Machine Drives 7. Circuit Analysis and Designe + Many Others 8. PCB Design (Proteous AREAS + Ultiboard + Altium Designerm + Diptrace) I assure you, if you assign your project to me, you surely gonna work with me in future.
$300 USD 在5天之内
4.8 (179条评论)
6.9
6.9
用户头像
A proposal has not yet been provided
$222 USD 在3天之内
4.9 (31条评论)
6.4
6.4
用户头像
I am an electronic engineer with more than 5 years of experience. I have worked on similar project before. I can make this and guide you through the setup. I can design the 3d casings as well. please contact me to discuss details.
$200 USD 在14天之内
5.0 (11条评论)
4.7
4.7
用户头像
Hi, We are a team of engineers with more than 10 years of experience in designing and developing various digital and embedded systems... Currently, apart from our R&D, we help engineering students to complete their academic projects. Also conduct seminars and workshops on Microcontrollers and Robotics... So we have experienced with a lot of Microcontrollers such as PIC, AVR, ARM, Arduino etc. We are also experienced with a lot of sensors and sensor modules.... We are very proficient with PCB desingning tools such as EAGLE, KICAD etc... We have done a lot of projects with arduino, please check my completed projects and reviews given by other employers...:-) We really would like to know more about your project, kindly let me know if you are interested...:-) Thank You
$155 USD 在3天之内
4.9 (11条评论)
4.7
4.7
用户头像
Excuse me for the price, let me explain. It is enough complex project with many features. - LEDs and effects, - sound, many different sound, - motion sensors, - and it all, have deep depend, and changing good, not like cheap toy. I'll provide schematic, part list and software. If you wish, I'll send prototype. As I understand size have matter.
$500 USD 在21天之内
4.8 (9条评论)
4.5
4.5
用户头像
hi, we have good expertise in electronics designing. ywe have completed more then 20 projects in iot and home automation. we would like to work with you
$222 USD 在3天之内
5.0 (5条评论)
1.8
1.8
用户头像
Hi, my name is Keith and I am a professional engineer living in Tennessee, USA. I graduated from Vanderbilt University with a mechanical engineering degree in 2012. Previously having worked in the aerospace industry, I am now a full time contractor and have worked on a wide variety of product designs for personal customers, Kickstarter businesses, and entrepreneurs. . Please feel free to contact me at any time and to take a look at my profile and portfolio. Thank you for your consideration. I look forward to hearing from you about the project and I can start immediately. I am very familiar with this kind of work for led and software design. - Keith
$100 USD 在3天之内
5.0 (2条评论)
0.8
0.8
用户头像
Hi, I have gone through your project requirements and would be glad to work with you on led driver board for lightsaber designs. I am confident enough to complete this project with total accuracy in order to give you the desired output. Once confirmed, I can start immediately and can even meet tight deadlines if any. I am always available on Freelancer chat to address any queries or concerns and assure you top quality work as I look forward to a long term relationship with each of my clients. Any changes or modifications would be respectfully addressed to ensure your maximum level of satisfaction. Do let me know in case you need any other information. I look forward to work with you. Regards, Parul
$40 USD 在1天之内
0.0 (0条评论)
1.5
1.5

关于客户

UNITED STATES的国旗
United States
0.0
0
会员自12月 30, 2015起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。