Find Jobs
Hire Freelancers

CFD analysis of Francis Hydroturbine Runner with the objective of improving the efficiency of turbine by changing the runner blade profile.

₹75000-150000 INR

已关闭
已发布大约 10 年前

₹75000-150000 INR

货到付款
A Francis hydro turbine was in operation for many years. Now the Runner blades are found to be worn out. Our objective is to first find out the efficiency of the turbine with the worn out blades and then modify the blade geometry so that the efficiency of turbine increases. This project involves CFD modelling and analysis of Francis turbine with the worn out blades and calculation of turbine efficiency. Then in next step the runner blade profile needs to be modified so that the efficiency of turbine increases keeping in mind that cavitation and surge is also minimised.
项目 ID: 5340203

关于此项目

19提案
远程项目
活跃10 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
19 freelancers are bidding on average ₹158,449 INR for this job
用户头像
I did masters in Turbomachines and having 10 years of experience in CFD Strong Computer Aided Engineering Analysis experience in FEA and CFD • 8+ years of experience in FEA and CFD analysis of Automotive, Turbomachinery and Nuclear components using ANSYS platform. • Experience in ANSYS FSI, Structural and Thermal Analysis • Experience in steady &unsteady aerodynamics of axial compressor, turbine stage and marine propeller using CFX/Fluent • Good knowledge of Turbulence modeling
₹118,421 INR 在30天之内
4.8 (20条评论)
5.5
5.5
用户头像
A proposal has not yet been provided
₹333,333 INR 在60天之内
4.8 (19条评论)
5.3
5.3
用户头像
Sure professional engineer with 37 years of design, analysis and CDF including experimental domain experience here.............................
₹142,105 INR 在30天之内
4.4 (49条评论)
5.4
5.4
用户头像
PhD in physics. Large experience in research. I will be glad to work in this project. Please send a message back to establish the details.
₹150,000 INR 在30天之内
5.0 (10条评论)
3.6
3.6
用户头像
Предложение еще не подано
₹236,111 INR 在3天之内
5.0 (3条评论)
3.2
3.2
用户头像
Hi, we are CFD experts. we have 30 years of technical experience. Some of our projects are as follows: •Analysis of clutch housing of an automotive. •Design and Analysis of lifting cradle for transporting heavy equipment. •Modal analyses of pressure switch in a pipeline. •CFD analysis of rotating blades of movers. •CFD analysis of an inlet manifold. •Fatigue analysis of a knuckle of a passenger car. •Stress analysis of a heavy-duty tire-manufacturing machine. •Aero dynamics analysis of an automobile. •PSD analysis of bicycles carrier in an automotive. •Meshing of a plastic flow analysis. •Airflow analysis of air conditioner duct in an automobile. •Parametric modeling and analysis for structural optimization of washing machine tub. •Simulation of a quenching process using Finite elements analysis. •BIW pre processing for crash analysis of automobile. •Drop test of container. •Stress analysis of bulk carriers. •Analysis of headers in heat exchangers. •Analysis of seat frame of passenger. •Transient thermal analysis of ceramic process simulation. •Shock analysis of on board structures. •Structural analysis of impellers. •Analysis of storage tanks. Looking forward to work with you soon.
₹100,000 INR 在20天之内
4.8 (7条评论)
3.1
3.1
用户头像
Hi, Good day to you. I am a Mechanical design Engineer for an aerospace firm. I have more than 6 years of engineering design, 3D CAD modeling, CFD, motion simulation, drawing generation, 3d rendering and manufacturing experience. I have a working experience of more than 6 years on ANSYS. I have 6 years of CFD experience. I have done similar sort of analysis and design optimization for wind turbine blades. I can perform the CFD for your project. Looking forward to your response.
₹144,444 INR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
I'd suggest clean project. It will be done with freeware CFD OpenFOAM and optimisation software DAKOTA. I have certain experience.
₹144,444 INR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
My name is Akshay Andhare, I'm a mechanical engineering student from IIT-P. I'm very proficient in CAD and CAE field. i'm using Solidworks for designing and Hypermesh and Ansys for pre/post processing. I can do this work because i'm capable of doing it. I had represented IIT- powai in many national events such as BAJA, SUPRA . In which I was a head designer of my team. Although i'm fresher in this website but I can guarantee you that I'll work with full enthusiasm and positive attitude. Regards, Akshay Andhare.
₹100,000 INR 在20天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear sir, we can help you in CFD simulation (Fluent) with mesh by hypermesh. With the high performance computer, we can check and optimize the profile. JTEC
₹125,000 INR 在15天之内
0.0 (0条评论)
0.0
0.0
用户头像
I am a civil engineer by profession and have worked with GVK Power on a 330MW hydro project in uttarakhand. I am familiar with francis turbine and can work on ansys CFX. I am interested in working with you on your project. I would be dedicated and yield my max efficiency cuz its one of its kind project and hence you can expect hard-working and best results!
₹111,111 INR 在15天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear Sir I am an Assistant Professor working in Department of Aeronautical Engineering at Park college of engineering and technology, Coimbatore, India. I am currently working for Park Research Centre involving hydro machine design projects which are very useful in remote areas to generate electricity. Project Experience Design of Francis Turbine Runner I have worked in designing a Francis turbine runner which produces 110 kW at 54 m head. I have designed runner blade using BLADEGEN and analyzed using FLUENT for the flow picture inside the runner blades. The simulation was done for the whole Francis turbine starting right at the spiral casing to the draft tube. The overall machine was analyzed to operate safely without cavitation since it is a small machine where you have more possibility for cavitation, particularly when there is loss in head upstream to the runner. Design and Analysis of Kaplan Turbine I have worked in designing and analyzing a Kaplan type axial hydro turbine which produces 1 kW for a head of 2 m. In this case the complete machine was modeled using CATIA and the flow analysis was done using FLUENT. This type of machines can be used to reduce the power scarcity near river beds where you have more flow rate but considerably small head. I will take this opportunity to provide efficient turbine and complete the work successfully as soon as possible. Thank You Elanchezhian Elumalai MRES (Aerodynamics and Aerostructures)
₹105,555 INR 在45天之内
0.0 (0条评论)
0.0
0.0
用户头像
First of all i am experienced in CFD & also working on steam turbine from past 15 months. Analysis with Ansys & NX nastran. Good Proficiency in Finite Element Analysis. Good in Modeling. Working Plan :- 1. Input Gathering. 2. Study on Francis Hydro Turbine input gathered. 3. CFD Model the Francis Hydro Turbine according to Input parameter values. 4. Analysis(Thermal & Structural analysis) of the Francis Hydro Turbine according to the boundary conditions & load applied. 5. Calculate the results theoretically with formulae. 6. Now work on increasing the efficiency of the blade by research & development in CFD Modeling structural. 7. Implementing the best results through analysis of modified CFD model of Francis Hydro Turbine blade profile. Testing will be done on all test cases prepared for the modified Francis Hydro Turbine.
₹125,000 INR 在25天之内
0.0 (0条评论)
0.0
0.0
用户头像
A proposal has not yet been provided
₹125,000 INR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
Well, this project requires quite a lot of work and experience. The project budget is very low for this project. Anyways, I have access to tools such as Blade Editor in which you can introduce your blade shape to the software and create parameters for Beta angles, etc. So, this process opens the gate for the optimization step. By specifying targets (e.g. maximize mfr) and specifying intervals to your parameters, software can carry out many possible combinations and shows you possible best combinations. Just to let you know; in this study if you pick me, I'll do the work by using RANS methods for turbulence, MRF for rotating blades and tetra&prism mesh for the grid. Good day!
₹338,888 INR 在60天之内
0.0 (0条评论)
0.0
0.0
用户头像
A proposal has not yet been provided
₹125,000 INR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi Addy, I would like to take up this project. Please let us know more details of your requirements. We would be modelling the blade geometry using solidworks and CFD analysis will be done using OpenFOAM software. Do we need to create geometry of old blades and do analysis or you already have goemtry model for them for which analysis needs to be made. Please fill in with more details and we would be happy to take up the project. Look forward for you reply. Thanks Chandan
₹125,000 INR 在30天之内
0.0 (0条评论)
0.0
0.0
用户头像
A proposal has not yet been provided
₹222,222 INR 在30天之内
0.0 (0条评论)
0.0
0.0

关于客户

INDIA的国旗
New Delhi, India
0.0
0
会员自10月 6, 2013起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。