Find Jobs
Hire Freelancers

CFD analysis

£10-20 GBP

已完成
已发布将近 7 年前

£10-20 GBP

货到付款
CFD analysis work. if you think you are good with this field message me for further details.
项目 ID: 13465545

关于此项目

26提案
远程项目
活跃7 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
Hello, I am a CFD expert with mechanical and chemical engineering background. I have done many CFD projects using Fluent, COMSOL, Solidworks, and AutoCAD in the past 10 years. Here are some projects I have worked on: - Simulated compresible/incompressible turbulent flows (k-e, k-omega, LES) in various geometries (2D,3D) such as airfoils, orifice and venturi - Simulated cavitation in pumps and ship impellers - Simulated particle concentration in mixing cell - Simulated flow through cracks and nozzles in oil pipelines - Simulated thermal comfort in a room with a temperature controlled heater - Simulated slurry and bubbly flows in pipes - Simulated heat transfer and reactions in packed bed reactor - Used UDF programming to add new feature such as specified velocity inlet, DPM particles interactions, ... Also my PhD thesis was about the design and optimization of a device to produce cavitation in venturi and orifice using ANSYS-Fluent. If interested please contact me to talk in more detail about your project and define our milestones. I Look forward to hearing from you. Regards Shaham
£105 GBP 在7天之内
4.8 (17条评论)
4.9
4.9
26 freelancers are bidding on average £74 GBP for this job
用户头像
Hello! I'm an expert in Ansys CFD software. Please look at my portfolio to see some examples of my work. Thank you!
£18 GBP 在10天之内
5.0 (28条评论)
5.1
5.1
用户头像
Hi, The total Estimated cost that I have mentioned is not final cost. First let's discuss about your project then we can finalize the cost. I have master's degree in Materials Engineering and bachelor's in Mechanical Engineering. I am currently looking after the mechanical design aspects in aerospace structures working as Project Engineer at Aerospace Engineering Department at IIT, Kanpur. I am having sound experience in working with CATIA, SOLIDWORKS, AUTOCAD, ANSYS, ABAQUS, MATLAB and other softwares needed for design. I have designed number of aerospace models for NWTF, IIT Kanpur for wind tunnel testing. What I can provide you better are: 3D modeling, drafting Simulation of the design Structural and Thermal Analysis Materials selection and design Basic engineering calculations I believe, I can help you in this project and can provide a quality work as per your expectations. Please go through my design portfolio and profile. If you find my credentials matching with your requirement, lets discuss about all the aspects of this project. Thanks & Regards, Om Prakash Yadav
£18 GBP 在1天之内
4.9 (35条评论)
5.2
5.2
用户头像
Hello..I am experienced engineer...I would like to help you in this project...I promise to give excellent results in a very short time..
£18 GBP 在1天之内
5.0 (11条评论)
4.0
4.0
用户头像
Hello, sir! (First Bidder to offer this) I hope I will be awarded from you. ************I agree for any price you will set ** You can test me over chat before you award me! Give it a try over chat before you award me! .. You WILL BE %100 SATISFIED. :) I will handle your task since it meets my experience because I am working as a junior teacher assistant in University (Nile University), so I can do this easily. Let's take about details. Abanoub Malak Thanks
£10 GBP 在0天之内
5.0 (12条评论)
3.9
3.9
用户头像
Hi, I would like to know more about your work. Look at my portfolio and maybe you can find the work similar to what you need to do.
£16 GBP 在5天之内
4.8 (11条评论)
4.2
4.2
用户头像
Dear Sir/Madam, I am a researcher in fluid dynamics and turbomachinery. I have professional experience in ANSYS CFD products. If you let me know further information about the project, I can fix the bid. Kind regards.
£555 GBP 在30天之内
4.8 (4条评论)
4.0
4.0
用户头像
Hi, I'd like to apply to your job. I have work experience in civil engineering field, performing advanced CFD analysis using mostly Ansys Fluent, Star CCM+, FDS and other codes. A number of different assignments and engineering experience including Offshore Engineering, Wave and Tidal Energy, Waste to Energy, HVAC, Auto Motive, Infrastructure, Process and Food Industry. I hold a Master's Degree in Engineering Physics and I finished my Ph.D in Combustion Physics at Lund University. Varying with the knowledge in different trades such ad CFD/FEA analysis by using Ansys software and other pre/post processing tools: • ANSYS (FLUENT, MECHANICAL, AIM, SpaceClaim), STAR CCM+, FDS, ANSA ... • Programming skills: Fortran 90/95, 70, MATLAB, C • Multiphase Gas/Liquid, Solid/Gas Reaction Kinetics Modelling • Operating system: WINDOWS, Linux and UNIX Dedicated engineer, that understand deadlines and provides a high quality of work. I look forward to applying my skills and experience to your projects. Best Regards, Fikret Saric
£166 GBP 在10天之内
4.4 (7条评论)
4.1
4.1
用户头像
A proposal has not yet been provided
£10 GBP 在2天之内
4.5 (6条评论)
2.9
2.9
用户头像
Contact with me for more details about your project, I am a Mechanical Engineer, CAD and CFD Specialist.
£25 GBP 在1天之内
5.0 (2条评论)
2.6
2.6
用户头像
Hello, I have great experience in CFD. I have also very experienced colleagues availables to help me in case I need support. I would like to know what exactly do you want to do in order to make you a more appropiate budget. Best Regards Harold
£144 GBP 在5天之内
5.0 (1条评论)
2.2
2.2
用户头像
hi, i am mechanical engineer. i am EXPERT in SolidWorks, and familiar with your task. contact me .............................................................................
£10 GBP 在1天之内
4.4 (3条评论)
2.3
2.3
用户头像
Hey please share your photos/ design/ ideas/ concept and receive a good deliverable. I'm basically MACHINE DESIGN ENGINEER. I have a very good expertise in Machine design calculation, 3D modelling, Finite Element Analysis (FEA), Product development. Review my profile once. Feel free to contact me. Mention all details about projects with deadline and objectives in chat. I have done large amount of such projects apart from freelancer on local bases. You may find my profile on this link https://www.freelancer.in/hireme/priyankpadaria • priyankpadaria on gmail
£300 GBP 在15天之内
5.0 (1条评论)
1.0
1.0
用户头像
Dear Buyer, I have reviewed you request for proposal. Based on my study you require CFD analysis of the model you are going to provide. If you require something similar to this then please provide us with further information to carry out fea analysis, so that we could discuss the same in our further meet. Please let us know if you require anything from our end which will help you to take decision for your project. Regards Paramjeet Singh
£255 GBP 在10天之内
4.4 (1条评论)
1.0
1.0
用户头像
Dear Sir, as a skillful CFD(Computational Fluid Dynamics) expert, since graduating from the university, I have been working in CFD field. I have the rich experiences to have conducted the simulations about the fluid and heat flow in the interior of various complex objects such as rotary kiln, blast furnace, heat treating furnace and so on. And I am a very skillful in the field of 3D modelling and meshing of complex configurations which is essential and prerequisite in the CFD. Besides, I am capable of coupling ANSYS FLUENT with UDF and MATLAB codes. Of course, I can make any calculation programs by using C++, MATLB languages. If you hire me, I would be able to soon start to finish it in time in the level that you require. And, I think that the close collaboration between us in this field in the future would undoubtedly result in a good success. I am looking forward to seeing your positive reply. With best regard
£18 GBP 在1天之内
0.0 (0条评论)
0.0
0.0
用户头像
A proposal has not yet been provided
£23 GBP 在1天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, I am a Master's degree holder in Aerospace Engineering with hands on experience in CFD. If you are looking for some one who can do your job please revert back. Thanks.
£20 GBP 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
I'm well-experienced in CFD analysis in different software. I use it in my PhD research as well. Looking forward to hear from you soon.
£23 GBP 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello my name is Mohamed from Egypt, i hold Bsc. in Mechanical Engineeringfrom Loughborough University, ranked the Fifth of my class with First Class Honour, and i am very good in this field, along with using other software like Solidwork, Qblade and etc.., where my graduation project was about designing and simulation of wind turbine using Ansys Fluent and i am sure i can get your work done, for simple of my work visit my profile, for more information contact me. Looking forward to hear from you
£18 GBP 在2天之内
0.0 (0条评论)
0.0
0.0

关于客户

QATAR的国旗
oxford, Qatar
5.0
7
付款方式已验证
会员自10月 16, 2016起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。