Find Jobs
Hire Freelancers

Design simple daughter PCB

$30-250 AUD

已完成
已发布超过 7 年前

$30-250 AUD

货到付款
We require a simple daughter PCB to be created as per the attached specification. The board is a simple charge controller for the lipo. Size and components have been provided in the specification. The GERBER for both the PCB and Stencil need to be provided. Confirm you understand the requirements in your response.
项目 ID: 10942534

关于此项目

34提案
远程项目
活跃8 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
颁发给:
用户头像
Dear sir, We have reviewed your data below and it is simple design, we will complete both schematic and layout, gerber files within 2days. Please trust and give us this design. Also, please feedback from my customer to show our ability. Please let me introduce a little about myself: 1. I have a team (7 members currently, can increase if need), we are working for a USA company(schematic design and PCB Layout, 3D models). - The software we are using is Cadence Allegro 15.7-16.6.10, Altium 14.3 for PCB [login to view URL] Cadence 16.6 for schematic design. CAM 10.5, Genesis and Solidworks 2014. - The board design can be small to large: up to thousand components and high density constraint, high speed signals, PCIe, SFP, DDR3, RF...etc. - Multi layers boards. (2 layers up to 40 layers). - Multi people to work on the board to meet your schedule. Thanks for your consideration. If you need more information, please let us know.
$77 AUD 在2天之内
4.9 (17条评论)
5.5
5.5
34 freelancers are bidding on average $106 AUD for this job
用户头像
Hello. I'm an electrical engineer / PCB designer. You may check my qualificatio in the profile portfolio. Your project interested for me . We can discuss any details in the chat. I prefer to work in the Altium Designer. Will do my best, Viktor
$60 AUD 在3天之内
4.9 (173条评论)
7.4
7.4
用户头像
Hello, I have been associated with Hardware design (Circuit / Electronics design), PCB design, Library creation and Library database maintenance, PCB Manufacturing, Component procurement, PCB Assembling and Functional testing for over 9 years. I have used various CAD/EDA tools for PCB design. Would you prefer any specific EDA tool for PCB design (or) any tool is okay? I will provide the PCB Manufacturing, Component procurement, PCB Assembling & Functional testing services too. I would like to take this up and are fully equipped to deliver the required files. So, if you'll give me a chance to take part to your work, I will respond in the same manner, handling you good quality projects, as soon as possible. I look forward to hearing from you! Wish you a nice day! Thanks & Regards, Karthik
$60 AUD 在2天之内
4.8 (119条评论)
6.7
6.7
用户头像
Hello I can help you with your project, i can design the PCB board with eagle software and also generate Gerber files to manufacture the same PCB board. I need more information about your project like deadline and other things. I can design your PCB board on a short period of time! many thanks. Deliverable items hardware: - Schematic on eagle 7.4. - PCB layout on eagle 7.4. - PCB 3D view bot without components. - PCB 3D view top without components. - PCB view 3D without components on SketchUp 2016 - BOM files. - Gerber Files. - PDF file schematic - PDF file PCB 1-1 If you have any questions feel free to ask. Contact me before your order. Thank you and Have a good day, John
$100 AUD 在10天之内
5.0 (71条评论)
5.7
5.7
用户头像
I have over 35 years experience as an electronic design engineer, please see my profile for more details The current price and timescales are only place holders to allow me to communicate with you If you think I can help then please send me further details such as the charger IC you intend to use? Also the power source for the charger Best Regards Dave Lelievre
$155 AUD 在3天之内
5.0 (17条评论)
5.8
5.8
用户头像
Hi! I see that you need a simple PCB made with some specifications. Also the schematic is designed in Altium Designer, so for me is a simple task. I can deliver you all the files needed and provide you during the design the 3D view of the board so you can choose if you want something to change on it. If you have any questions please let me know! Thanks! Adrian
$200 AUD 在2天之内
4.9 (30条评论)
5.6
5.6
用户头像
Altium Designer pro here. No problem to have this routed in just an hour or something (but giving a ~day) anyway. Deliverables will be altium project + used libs + gerbers/ncdrill output and/or instructions how to generate them if needed. The gerber output will include paste (stencil) layer as required by the project description :) No problem with non-standard board outline etc.
$250 AUD 在1天之内
5.0 (4条评论)
5.1
5.1
用户头像
I have over 16 years PCB layout experience, I can use various kind of ECAD tools. Which tool would you like to design your PCB?
$100 AUD 在2天之内
5.0 (10条评论)
5.0
5.0
用户头像
i have 3 years experience in embedded systems and pcb design with eagle Cadsoftware and altium .. so i can do your job within a time limit with your satisfaction. and I have good experience in components selection ...
$250 AUD 在25天之内
5.0 (3条评论)
4.3
4.3
用户头像
I have been designing and certifying consumer and industrial electronics for almost 10 years. I believe i can quickly deliver the design you have requested to your complete satisfaction. Thank you for your time and consideration.
$50 AUD 在3天之内
5.0 (1条评论)
3.4
3.4
用户头像
A proposal has not yet been provided
$100 AUD 在1天之内
5.0 (2条评论)
2.8
2.8
用户头像
Hi I 've seen your pdf with the requirements for the pcb you want. I can design this for you, but will have to clarify some things, to achieve the required results. To fit exactly the pcb at your main board, you will have to provide the exact XY location of the holes shown at the pdf, and laso the complete XY corner points for each section that the pcb scheme creates. Also measurements shown are at a decimal of 0.000000 clarity, however that clarity isn't needed in reality, as no pcb cutter from any manucaturer will achieve that kind of "fine cut". Possible this will finally round up to about 0.00mm or at the very best (and costly) case to the 0.000 mark! Is that acceptable by you? You should also say what the LiPo battery connection (P3 of schematic) method will be used. Will it be a direct wire soldering at ie some pcb pads, or you need a PCB wire-to-board connector that wil mating the battery's one? Also P1 & P2 connectors. Will they be just some Terrminal Block type or what else you may prefer. Another thing to clarify is what type of components you want it to be. Except of course the IC the passive components will have to be SMT or you might prefer to work with THT types? I will deliver full production files (GERBER-NCDRILL- BOM for PCBA) and also drawings as pdf files for your reference. Feel free to contact me if interested for any further clarifications.
$233 AUD 在12天之内
5.0 (1条评论)
2.9
2.9
用户头像
Hello, I have 20 years of experience working on hardware and software projects. I am currently placing lower bids on projects on freelancer.com in order to secure some initial projects and build my reputation. Your requirements seem very clear however there are a few details that I do not see. Specifically: * Measurement values to holes / through holes. * Measurement values to LED placement. * Port details for P1, P2, P3 (e.g. what type of connector and / or pad). * Angles and lengths for the right side of the PCB. * LED form-factor preferences. Thank you for your consideration. Tom
$45 AUD 在3天之内
5.0 (1条评论)
2.6
2.6
用户头像
Hi, I would like to work with you in this project and I understand clearly what is required. Please take a look to my profile to get an idea about my skills. Best regards.
$70 AUD 在3天之内
5.0 (2条评论)
2.2
2.2
用户头像
I had done a-lot of projects of this kind in my academic life. I can make PCB on different software like proteus, fritzing, target 3001 etc you can trust on me for this project. I'll assure you that i'll not let you down .
$150 AUD 在3天之内
4.5 (3条评论)
1.7
1.7
用户头像
Hi, I would like to design this. Don't hesitate to write me back and ask in case of any questions. Price is negotiable Regards, Samuel
$35 AUD 在3天之内
5.0 (2条评论)
1.6
1.6
用户头像
I've a big experience in development of hardware. Some part of my developments are presented in www-nairi-tech.com.
$200 AUD 在5天之内
4.4 (1条评论)
0.8
0.8
用户头像
Hi, I can do it right away, I've been designing PCB for about 2 years now. We can discuss the complete details, send me message. Thank you Mark
$55 AUD 在1天之内
0.0 (0条评论)
0.0
0.0
用户头像
A proposal has not yet been provided
$111 AUD 在2天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have 4+ years working experience in pcb layout design,Mechanical 3d modeling. Fluent in Mentor Expedition, Cadence Allegro, Mentor PADS, Altium Designer pcb layout tools. Experience in creating footprints library, pcb layout, constraint editing, gerber generation. Certified Interconnect Designer (IPC CID) 2015. Basic understanding on DFM, DFT and appication on Valor DFM tool. Experience in routing high speed signals such as usb3.0, sata, pcie, lvds etc. Experience in routing double-sided, 4-layers, 6layers,8layers and more layers pcb stackup. strong high speed layout skills including differential pair, impedance control, matched delay, etc Experience with isolation requirements, Experience designing high density boards that incorporate microprocessors, DDR2 and DDR3 memory and peripherals, including layout experience with BGA parts Experience in board layout involving communication protocols such as Ethernet, USB, I2C, etc Solid knowledge of board fabrication process Experience with Switch Mode Power Supply layout techniques Experience with high-speed digital hardware design Responsibilities: Schematic capture, symbol creation, placement,3d model assign, connection, netlist and BOM generation using Various Cad Tools Complete Placement and Layout of HDI Circuit Board Designs and FPC’s with Cadence Allegro PCB Editor,Mentor Graphics pads,Altium,Eagle.. Generate all Fab and Assembly Packages (ODB++ or IPC-2581). Working with assembly and manufacturing drawings (electronics,
$72 AUD 在1天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have a lot of experience on this issue , I believe it will be useful to you. Let me do this project, I will finish the project in the shortest time that I can.
$80 AUD 在2天之内
0.0 (0条评论)
0.0
0.0

关于客户

AUSTRALIA的国旗
Sydney, Australia
5.0
74
付款方式已验证
会员自2月 16, 2014起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。