Find Jobs
Hire Freelancers

designing OF a low noise amplifier(repost)(repost)

$30-120 USD

已取消
已发布大约 16 年前

$30-120 USD

货到付款
Aim To design a low noise amplifier using an Infineon RF transistor BFP640. The amplifier is to be used to amplify the L1 GPS signal and so the centre frequency is 1575MHz and bandwidth 40MHz. The requirements are a noise figure of less than 1.2dB, a gain of 20dB ± 0.3dB and S22 should be less than -15dB over the entire bandwidth. To help you with your design you may wish to use a circuit simulation CAD package. I have provided a set of bare schematics and display sheets for Agilent Technologies ADS which you may wish to use. The data sheet does provide the standard spice parameters, including parasitics should you wish to use a different simulation package. I strongly recommend you use ADS along with the schematics [login to view URL] is in the form of a report and electronic design files. ## Deliverables Design :A preliminary design with ideal resistors, inductors and capacitors. If the design does not meet the specifications then WORK IS NOT CONSIDERED AS COPLETED: 1. Gain: for each 0.1 dB below or above specification. 2. S(2,2): for each 0.1dB above specification. 3. NF: for each 0.1dB above the specification. A working design with real inductors, capacitors and resistors and other appropriate elements will be needed. The specification for the noise figure for "real" devices has been relaxed to a NF less than 1.3dB I will check the amplifier specification at lower limit band mid-band and upper limit and Report The purpose of the report is to demonstrate how you choose the component values and bias points and to demonstrate the performance of your design. You must also include details of the simulator and any models used to simulate the circuit if different from ADS. Sufficient information should be given to uniquely identify the components and any model used to simulated parasitic effects. The report should also include graphs showing the gain in (dB) vs frequency and plots of the magnitude of S22 and noise figure. These graphs should be larger enough to CLEARLY show you have reached the goals specified above. These graphs will be used to assess whether the design reached the specifications and any lack of clarity will result in HOLDING THE WORK [login to view URL] the results still differ the whole work submitted won't be counted an inclusion and discussion of other simulation results that demonstrates the performance of your circuit is higly important. Also clarity of the report. The report should present the results and choices in a clear and CONCISE manner. The maximum size of the report is 5 pages excluding title page. ## Platform ADS is a RF systems and circuit simulator written by Agilent Technogies. It also allows the user to design the layout of the circuit and to perform electromagnetic simulation of planar structures. The licenses for the ADS design software were donated by Agilent Technologies. To help your design process and to minimise the learning curve of using ADS, I have provided a set of schematics that are held in a compressed ADS project called CA.zap. WILL BE PROVIDED WHEN THE BIDDER ACCEPTED
项目 ID: 3760476

关于此项目

1条提案
远程项目
活跃16 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
1威客以均价$100 USD来参与此工作竞标
用户头像
See private message.
$100.30 USD 在10天之内
2.5 (4条评论)
0.5
0.5

关于客户

SAUDI ARABIA的国旗
Saudi Arabia
5.0
6
会员自11月 16, 2007起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。