Find Jobs
Hire Freelancers

Create manufacturing drawings

$30-250 USD

已关闭
已发布超过 5 年前

$30-250 USD

货到付款
I need someone to create manufacturing drawings based on notes and existing drawings. Basically, I need designs for 2 hoppers and augers that will feed and remove product from a machine. Attached are drawings of the machine the hoppers/augers will be built around and drawings of a similar hopper to what I need to feed the wet separator. Notes: 1. Feed wet separator - product is dry plastic granules with small amounts of copper mixed in (see photo attached) - need variable speed from 0.5-2m3/hr (must be able to control speed) - stainless steel 304 construction - vibrating 1.5m3 hopper with minimum 50deg sides to ensure product falls down in screw auger - hopper to have rectangular shape with one side at least 1400mm wide - 1600mm dumping height into the wet separator 2. Empty wet plastic granules - product is clean, wet plastic granules - speed should be 2m3/hr (no need for speed control) - small hopper with maximum dimensions 600mm wide and 550mm deep (see photo) - dumping height 1800mm - stainless steel 304 construction
项目 ID: 18046151

关于此项目

60提案
远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
60威客以平均价$328 USD来参与此工作竞价
用户头像
Hi there, This is Bogdan from Romania. I'm a mechanical engineer - specialized in the industrial robotic field, 3D designer and modeler (from time to time and some projects I could make the functional prototype too). I'm doing product design, industrial design, reverse engineering, ideation, etc. I have over 15 years experience working on various systems/devices across multiple industries, from concept to launch. 1 - for the project you want, will be necessary to have more info: ex - the mesh for the conveyor belt (or i could design it as a flat belt and you will place the proper mesh type), the percent of copper debris in the plastic granules, power feed, etc, etc 2 - variable speed for the conveyor is not an issue 3 - vibration parameters?.. on a single direction or two?... 4 - what kind of plastic do you need to process? (you gave the parameters in cubic meters, but pet plastic has different specific weight than polyethylene or abs...) 5 - what type of foundation you have? in order to know how to make the anchors... for sure, you are aware that the project is not possible to be made for 200, right? Regards Bogdan
$200 USD 在30天之内
4.8 (29条评论)
6.6
6.6
用户头像
hello i have checked your files i have a question the number 1: make fabrication drawing at your file? please confirm the number 2: make 2D fabrication from 3D file, the 3D file you will send for me when i start work? please confirm, so i will start work now i wait your feeback thanks You
$250 USD 在3天之内
4.8 (132条评论)
6.3
6.3
用户头像
young energetic and experienced Architectural & mechanical CAD designer. Freelancer certified Autocad Designer. expert AutoCAD 2D/3D 3d printing, solid works, Excel autocad , autodesk fusion 360 and sketchUP user. Best quality work in lowest price guaranteed. No any rework charges. 100 % work satisfaction. please consider. thank you
$200 USD 在4天之内
4.7 (145条评论)
6.0
6.0
用户头像
Prospective client, we ready to offer you our services and we ready to create manufacturing drawings and designs of the hoppers and augers according your requirements. We are proficient users of 3D CAD software like Autodesk Inventor, AutoCAD, SolidWorks, Creo Parametric, CATIA, 3DS Max and ANSYS. We have over 7 years of experience working on various projects as design-engineers, engineer-developers and 3D designers. We are confident that our experience and qualification will help you to achieve required results. You can review samples of our works in portfolio, on our profile page. We are always ready to answer any questions regarding how we can create your project. Thank you.
$250 USD 在14天之内
5.0 (21条评论)
5.7
5.7
用户头像
Looking forward working for you. Have around 4 years exp as design engineer. Will be working in solidworks 2018. Regards MONIL SOLANKI
$250 USD 在3天之内
5.0 (28条评论)
5.3
5.3
用户头像
Hai. we can generate manufacturing drawings from your existing drawings
$333 USD 在7天之内
4.7 (44条评论)
5.6
5.6
用户头像
I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.
$250 USD 在4天之内
4.7 (25条评论)
5.6
5.6
用户头像
Hi. I'm interested in your project. # SolidWorks # AutoCAD # 3dsMAX # ANSYS # MS Excel # MS Word # MS Office # C++ # Java
$277 USD 在7天之内
5.0 (31条评论)
5.0
5.0
用户头像
Hello sir, My name is Abanoub Malak, a mechanical engineering ,, I am specialist in product design and 3D modelling with a more than 4 years experience and working as a teacher assistant teaching the major courses in product design and CAD/CAM.. So, if you are look for high quality with low price you can contact me ,, AND HEY,, DO NOT PAY EVEN ONE CENT TILL YOU GET 100% SATISFACTION.. You can try this over chat before you award me .. just try my and you will not regret.. best regards, Abanoub Malak
$30 USD 在0天之内
5.0 (33条评论)
5.1
5.1
用户头像
Hello. I'm Lam. Mechanical Design Engineer. I understand your job, I think your project needs a lot of time and I would like to be quoted $ 1000. With 6 years of experience I will finish your work well, please review my profile to know details about me, thank you.
$1,000 USD 在15天之内
5.0 (10条评论)
4.7
4.7
用户头像
Hi, I just read your 3D Design project description. I can do it and ready to start work immediately. so please tell me:- 1. show me refrence for the Design that you like? 2. tell me the concept ? I will give you first draft with few hours. The design provided will be creative and according to your requirements. We will also provide you multiple design options. You can check my freelancer portfolio. I will deliver you project in time and there will not be delay in my work. I assure that you will like my work. I am here for long term work relationship so will give 101% best output from my end so that you consider me for future projects. Thanks & Regards Neeraj
$55 USD 在0天之内
4.8 (8条评论)
4.3
4.3
用户头像
Hi there, I am a leader 3D and 2D designer and mechanical engineer. My group and I are expert in industrial and artificial drawings. We also have experience in creating logos, banners and etc. Please check our portfolio and website to see our latest works. We are looking forward to hear from you. Regards.
$200 USD 在7天之内
5.0 (2条评论)
4.0
4.0
用户头像
hi, I am a Civil Engineer and have long experience in Construction field .Also well aware of Equipment mentioned below. Can help u in ur work Thanks
$250 USD 在3天之内
4.6 (11条评论)
4.0
4.0
用户头像
hi, I hope your day is going great. my name is Hasoneh, Mechanical Engineer and solidworks professional. if I take this project I will: 1. create 3D cad for the parts. All parts will be designed for sheet metal manufacturing or Injection Molding. 2. 2D technical Drawings. 3. provide dxf files, cut lists, BOM and all relevant files for manufactring. looking forward to hearing from you. Hasoneh,
$115 USD 在2天之内
4.9 (4条评论)
3.4
3.4
用户头像
hello there I can create this machine with solid works so I'm expert and understood how it works so I can create video simulation too to show how it work I'm mechanical engineering and designer expert plus 5 years experience and done many projects manufacturined success hope to contact soon regards mohamed
$100 USD 在3天之内
4.4 (8条评论)
3.6
3.6
用户头像
Hi, Im a mechanical engineer with 8 years experience in the field. I have worked with many clients in Australia and I know the AS/NZS standards required in technical drawings. Im using solidworks for designing. I have designed a similar kind of hopper for filter cartridge machine. Hopper design with vibration is pretty straight forward. To be frankly I havent designed a auger yet, but I went through couple of designs and fabrication methods. Do you have manufacturing and fabrication facilities? Variable speeds of AC motors can be achieved by PLC with VSD. I couldnt find the image for the product ( dry plastic granules with small amounts of copper mixed ). I would like to discuss further regarding the project. Cost is negociable. Hope to hear from you soon, as Im free on coming 2 weeks. Thanks Nimesh
$170 USD 在5天之内
5.0 (4条评论)
2.8
2.8
用户头像
Hi interesting project I use Fusion 360 software and the file can be changed into any format see my portfolio to see the designs I made best regards Rashid Ridha
$35 USD 在7天之内
5.0 (7条评论)
3.0
3.0
用户头像
Good morning. This designs is very quickly to do, I worked in something like that, if you are interesitng I can send some pictures for your knowledge... Best regards.
$222 USD 在8天之内
4.4 (1条评论)
2.8
2.8
用户头像
Hey please share your photos/ design/ ideas/ concept and receive a good deliverable. I'm basically MACHINE DESIGN ENGINEER. I have 10+ years good expertise in Machine design calculation, 3D modelling, Finite Element Analysis (FEA), Product development. Review my profile once. Feel free to contact me. Mention all details about projects with deadline and objectives in chat. I have done large amount of such projects apart from freelancer on local bases. You may find my profile on this link https://www.freelancer.in/hireme/priyankpadaria • priyankpadaria on gm ail
$54 USD 在13天之内
5.0 (3条评论)
1.9
1.9
用户头像
Hi. I have good solid edge team with me who can design and fabricate all the process equipments. Our engineers have 6 year of experience in 3D modelling and drafting. please give us a chance to take up this project we will be definitely give you our best thanks. Mandar Founder member, catalyzer.
$55 USD 在4天之内
5.0 (1条评论)
1.5
1.5

关于客户

AUSTRALIA的国旗
Sunshine, Australia
5.0
34
付款方式已验证
会员自4月 7, 2011起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。