At a beach condominium we provide luggage carts for our guest as they check in or out. Many guest don't return the carts in a timely manner.
I am looking for an Arduino programmer to code a very simple project.
Theory:
Each cart has a audible alarm to remind the user to return the cart. When the cart gets out of Bluetooth range of the cart storage room, a timed loop plays audible messages at selected intervals reminding them to return the cart. At the time limit a final message concludes with an alarm that sounds until the cart is returned to the store room (back in Bluetooth range).
Components:
Arduino Uno
Bluetooth card
Micro SD Card
Micro audio amp
Speaker
Hi
I am experienced embedded system developer with more than 8 years of experience in development of systems based on arduino and other microcontrollers.
I have read the idea and would like to discuss more if you are available.
Please review my profile I have completed over 200 projects here
regards
Dear sir
I have more than 10 years experience in embedded systems design I nearly have all the required components and i can make the no Bluetooth signal alarm, please message me so that we can discuss
Best regards
Hello , I see you are looking for an embedded system engineer who has rich experience in Arduino programming. I can help you with this project and start the project right away.
I am an embedded software and hardware engineer who has 7 years of experience in embedded software and hardware design. i have done many Arduino projects before:
- Chat Server using Arduino.
- DIY Arduino Motor Shield.
- 5×5 rgb lpd6803-led matrix arduino controlled.
- Arduino Esplora Light Calibrator.
- An 8-Bit Waterfall using Arduino.
- USB Game Pad With Tilt-accelerometer Mouse using an Arduino.
- Light Painters Palette aka Light Box.
Please contact me to discuss the project in more detail via chat or call.
Thank you
Alexander
Before awarding to anyone, give me a chance to discuss it with you. I am embedded system electronics engineer with 3 years of experience in iot development. I have expertise in development board Arduino, ESP8266, Raspberry Pi, etc and the microcontroller ARM, Microchip, stm32f, etc. I can design and develop PCB. I have hands on experience in mobile app development that communicates with electronic hardware.
I have worked on home automation, beacon based indoor positioning system, smart parking system with real parking spots update on mobile app, etc. Another iot product I worked on was women saftety device, on which, if women press the button, her location is shared with her family members and it starts recording audio to a cloud server automatically, while at the same time it calls nearest police station automatically.
Please consider sending me a message so that we can discuss this further
Hi sir,
we have done tons of projects on arduino.
lets talk to us on your project.
we are very much looking forward to you on this cart project.
we can give you the viable solution.
Regards,
Ahmed
Hello,
I am Anthony from Sri lanka. I have 7 years of experience in the filed and I am very much interested in your project.
Why you should hire me ?
* As a full time freelancer I have my own PCB fabrication work shop and testing lab. So there is no problem doing live tests with you after the device has been developed.
* My workshop is equipped with CNC machine, FDM 3D printer and DLP 3D printer. So there is no problem designing and printing plastic parts you required.
Please contact me if you are interested. Thank you
Anthony
Hi there I am an electrical engineer with 8+ years of experience related to Arduino and Bluetooth. I can make this system for you and can make a prototype to show you the working. Let me know if you are interested.
Hello
I have got your job posting “Arduino project - Cart Return” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics Embedded systems(Arduino,Rasberry pi ,ARM processors ,PIC microcontrollers,Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio.
I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure.I will remotely guide you and help you build the system on your side.
I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you.
Thank you for your consideration,
Best Regards,
Haseeb Shafqat
Hello!
I am very interested in your post project.
i am really looking for this kind of project for a long time in freelancer since i have rich experience on it.
I think this project is very suitable for me and i am sure i can give you good result .
If you award me for your project, you will get good result .
looking forward to work with you.
thanks regards
Hello!
I can assist you in making of this device. I have some suggestions for your device. Since the wifi is more suitable for you to this task. I request you to use that. We will create an wifi accesspoint at your cart store room. The carts will be defined as client. The cart will be in continuous communication with wifi access point. There will be use of realtime clock to monitor the timming and the process will procedd as per your requirement.
Kindly visit my portfolio for the same.
please note:-
Bid quote depends on project task. We will discuss later while sharing the project work.
Hello,
My name is Andrei, i am a Romanian IOT Developer with a lot of experience in IOT projects and automatics .
I just finish a project with ESP32 used as a beacon , i can make your device direct on this board with PCM alarm , or do you want a sound like put me back .
I deliver clean and clear solutions using my skills , the price is for full deployment of the product , with tests .
I can work with all types of Microcontroles programming in C , C++ , Mikro C , CCS C , Atmel Studio , Arduino , gcc .
Creating Schematics and PCB in Kicad , Eagle , EasyEDA and Proteus (+simulation).
i have an workshop full of parts and the infrastructure to build PCB and test the solution end to end using special tools (Spectrum analyzers , oscilloscope , logic analyzers )
Derivable on the project :
Wiring diagram for prof of concept .
Schematic design
PCB Design
Gerber files for manufacturing
MCU code explained every line .
As an additional service i can make you a full working prototype and ship to you.
Regards,
Andrei
Hi Sir,
I read your job description thoroughly. You have explain the requirements very well. I am happy to say that I can do your this work. I have done many similar projects, please see portfolio on my profile. I will do your this work in very reasonable price that just is in 380$ only. Please let me know if you have any confusion or question.
Best
Abdul Rehman
yes buddy, its me imad, a solo developer, who has done 200 plus projects in 50+ platforms,,,,,u will feel brotherhood,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Hi, I an an electronics engineer with more than 6 years experience in embedded systems and arduino platform. I can deliver your requirement in 3-5 days.
I'll deliver 1. the arduino code ,
2. connection diagram of speaker, Bluetooth, battery/power, and arduino
3. a setup manual.
in this system it is recommended to use audio amplifier (a small circuit, already available with USB powered speakers).
Please discuss details in chat.
Thank you.
Hello,
I am an electromechanical and electronic technician, and I only have the thesis to be an electronic engineer.
I work in an electrical testing laboratory, under international standards, im work here for more than a year ago.
I have done PCB design courses, I use several softwares for your comfort. I have experience in PCB design.
If you want to know something else, do not hesitate to contact me
I think it could be of great help for your project.
I am already at your disposal.
regards
Hello Friend,
I have read you project requirements.I am familiar with your required technologies and I have expertise resource to start with your project.
I have 5+ year experience in design and development of embedded software, I have expertise in Embedded Design,C, C++,linux driver,linux application,arm linux,raspberrypi,Arduino,jetson-tx2,stm32,stm8 etc.
If you are interested in me, please contact me for details.
Thanks
Regards
Baofeng