Find Jobs
Hire Freelancers

Computer system analysis project

€8-30 EUR

已关闭
已发布将近 5 年前

€8-30 EUR

货到付款
it is a computer system analysis project which will be done on sharp software.A multiprocessor system is composed of two computing modules: CM1 and CM2. Each of them contains one processor(P1 and P2, respectively), one memory module (M1 and M2) and two disks: a primary disk (D11 and D21 respectively) and a backup disk (D12 and D22 respectively). Initially, the primary disk is accessed by the corresponding computing module, while the backup disk contains the copy of the primary disk’s data, and it is accessed only periodically for updating operations. If the primary disk fails, it is replaced in its function by the backup disk. In terms of reliability the disks are identical, they are characterized by the same failure rate or reliability cumulative distribution function (cdf). The computing modules are connected by means of the bus B; moreover, P1 and P2 are energized by the power supply P S: the failure of P S forces P1 and P2 to fail. M3 is a spare memory replacing M1 or M2 in the case of failure. If both M1 and M2 are operational, M3 is just kept alive or in warm standby in order to maintain the data stored, but it is not accessed to read or write any data. When M1 or M2 or both fail, M3 substitutes the failed unit. In order to properly work, the multiprocessor computing system requires that at least one computing module (CM1 or CM2), the P S and the bus B correctly operate. Moreover, a computing module (CM1 and CM2) is operational if the processor (P1 and P2, respectively), one between the local memory (M1 and M2) and the shared memory M3 and one disk (D11 or D21 for CM1 and D12 or D22 for CM2) are not failed. Assuming that all the component have a failure time exponentially dis- tributed and the memory module M3 has different failure rates, when it is in warm standby and or active, as reported in Table 1, compute the system reliability function and the MTTF. Failure rates in Table 1 are expressed in failures in time (FIT), i.e. number of faults per billion device hours. Moreover, compute the system availability assuming that the system is reparable and the component repair rates are as in Table 1
项目 ID: 20042245

关于此项目

远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作

关于客户

ITALY的国旗
Messina, Italy
0.0
0
会员自6月 19, 2019起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。