Custom PCIe4x board with Intel i350 ethernet controller

$750-1500 USD

已关闭

已发布

超过 5 年前

$750-1500 USD

货到付款

I am looking for a skilled electronic engineer capable to design and prepare for production a PCIe x4 board with dual NIC controller Intel i350. The two SerDes interfaces of the i350 controller should be linked to two 400pin connectors. The 400pin connectors will be used to attach NVidia Jetson TX2 modules to the board. The Jetson TX2 modules will draw power from PCIe connector. The goal of the project is to connect two NVidia Jetson TX2 modules to a x86 host. The host PC will recognize this board as a NIC card with two interfaces. The Jetson TX2 modules' ethernet ports will be 'hardwired' to the i350 NIC. Thus, the Jetson TX2 modules would be accessible to the host PC via LAN connecton. Succesful bidder should have the datasheets to the components mentioned in this short project description to be able to discuss the scope of work.

Circuit Design

Electrical Engineering

Electronics

Microcontroller

PCB Layout

项目 ID: 17931844

关于此项目

9提案

远程项目

活跃5 年前

想赚点钱吗？

电子邮箱地址

在Freelancer上竞价的好处

设定您的预算和时间范围

为您的工作获得报酬

简要概述您的提案

免费注册和竞标工作

9威客以平均价$1,441 USD来参与此工作竞价

@highfliercnr

Dear Sir, I am an highly skilled board designer who has over 17 years experience on complex, multi layers PCB design. I can provide you with service from schematic entry to PCB Layout.I can also provide the prototype service. Please message me if you are interested or want to learn more. We can discuss further. EDA Tools: Altium17, Pads, Orcad, Eagle8.. Thanks

$1,500 USD 在20天之内

4.9

(113条评论)

8.3

@RaspberryOculus

Hi there , I am an electrical engineer with 19 years experience in this area. I am interested in your proejct Custom PCIe4x board with Intel i350 ethernet controller

$776 USD 在20天之内

5.0

(14条评论)

5.9

@juanchigarin

Hi Sr, I can make the design that you need. I'm electronic engineer with more than 15 years of experience designing circuits. I know exactly what to do in this case when the high speed signals must to be carefully routed. As you can see in my portfolio I worked in high speed ethernet connections. If you need I can send you examples of my jobs. I work in Altium desingner in 4 or more layers, make the desing in 3D and take in count all the necessary details given by the manufacturers to ensure the best results. I will give you a complete package with the files for manufacturing, Altium project, the BOM and the 3D files for checking it before to manufacture. Please any question feel free to contact me. Best Regards Eng. Juan M Garin

$1,388 USD 在15天之内

5.0

(15条评论)

5.0

@hayat38402

I am Excellent at the following:  Embedded C Programming.  Microcontroller like AVR, PIC and STM32.  IDEs like Keil MDK V5, ATmel studio and MPLab XC8.  IOT Technologies like Ethernet, GSM GPRS.  HTTP Restful APIs connection for IOT Communications. I can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards.

$1,500 USD 在20天之内

4.7

(18条评论)

4.9

@Euroaccount

Hello I am an electrical engineer who have done a lot of software and hardware developments before. Your mentioned devices seem like somewhat new to people, but actually the device setup and embedded software development is based on only one basic principle. The datasheets are different, the main principles are all the same. I have found this from my several years of experience since I was a student. I can help you with my solid knowledge on this field. Thank you Best Regards, Alexander

$1,250 USD 在20天之内

5.0

(1条评论)

2.0

@ZmanEvolGenious

I have a lot of professional experience in pcb designing. I have multiple finished pcb products. One of them is a 30+ layers pcb with Ethernet FPGA and a lo of things on it. I’ll give you finished product in two months.

$2,222 USD 在60天之内