Find Jobs
Hire Freelancers

Firmware programming St microcontroller

$10-30 USD

已关闭
已发布超过 5 年前

$10-30 USD

货到付款
I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will report you by email. You can also watch the pcb via webcam or the ide by teamviewer if you need it. Please read [login to view URL]
项目 ID: 17632847

关于此项目

18提案
远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
18威客以平均价$96 USD来参与此工作竞价
用户头像
Puedo ayudarlo ! Senior ENGINEER has more of 40 years’ experience in this profession, developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods, communication I2C, I2S, SATA, RS232, RS422, RS485, USB, TCP, Bluetooth, RF433, Wi-fi, GSM, GPS, GPRS and any other serial communication. Producing Analog/Digital board designs, layouts and modifications or any other multi-layer PCB design, Verifying designs and layouts. See Portfolio for samples of works. Preparing documentation for manufacturing. Gerber, Bom, 3D model Contact with partner in China for make PCB in 32 layers Design in Any CAD, Allegro, Altium, Orcad, Eagle, and other. Developing board layout including 3D model, size, performance, power consumption, and cost. Developing software for any microcontroller or microprocesor in C, C++, Basic, Assembler, compiler Keil, IAR, and other. Ing. Miguel Antonio Ojeda Curriculum vitae SKILL Strong Hardware Design Skills, Analogue/Digital Video Audio and Power signals, communication signals OrCAD/ Protel / Altium/ Mentor Graphic / Eagle and similar PCB include 3D Model Design/Applications, Embedded Software Programming Assembler (C, C++) and Visual Basic, Full understanding of Micro-controllers, and microprocessor Hardware Engineering Fundamentals and Hardware Specifications, Attention to Detail Programming in Assembler for any microcontroller or Microprocessor
$222 USD 在3天之内
4.9 (52条评论)
6.5
6.5
用户头像
Hi, This is my daily project. I think I just need an hour to finish this task. Usually I generate a project using STM32CubeMX and compiling using System workbench Eclipse. I have use STM32 for about 5 years since it's hype, So, I'm familiar with its architechture. It's come with a bunch of Example in it's BSP that could accelerate our development process. Or we could use arduino IDE, since STM32F103 already have arduino porting, That would be fun. Lets discuss the detail over chat. Best Regards, Rijal
$30 USD 在1天之内
5.0 (62条评论)
6.0
6.0
用户头像
Hello. I am an Experienced embedded programmer with 5 years of experience. I have been working on STM32 family for a long time. I have done programming for UART, SPI, I2C, CAN, ADC, DAC, USB, Ethernet and many more. Do let me know if you have any questions. Jaydip.
$200 USD 在3天之内
4.9 (27条评论)
5.8
5.8
用户头像
Hello , How are you , hope all is good ! Regarding your project , I have long experience with STM32F series of MCU (namely STM32F103 , STM32F207 , STM32F407 and STM32F429I) . I have all the required HW , and I deliver TESTED code. --------------------------------------------------------------------------------------------------------------------------------------------------------------- I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. More to be discussed once you contact me . BR, M.T.
$35 USD 在2天之内
4.8 (39条评论)
6.0
6.0
用户头像
I have wide experience with stm32 devices. I have deeply-proven serial comunication libraries as ring buffers,... Regarding your project, the doc is really clear!! i only miss a CRC in the serial protocol for robustness. Thank you
$444 USD 在15天之内
5.0 (5条评论)
3.5
3.5
用户头像
I've been working with microcontrollers STM32 last 7 years. I have all the hardware to make this job. I have all the qualities that you are looking for. I have a strong belief that I would be able to make this project successful within short time. I will testing completely and write intelligible comments on each program step. And I will answer all your questions. I will give you advice in this area, and after the end of the job, as much as you'll need. I am very interested in the accumulation of work history and regular customers. I have a long term plan to work in here, that’s why I am here with all qualities and experiences. I am here not to cheat you rather help you. The last device which I made this Base Station Controller. 2 uC STM32F373. 74 analog inputs (with a possibility of reassignment of functions). 16 relays. 8 digital inputs. SD memory card, CAN Interface, USB, SPI Interface ,USART Interface, 1-wire Interface, Ethernet(UDP,TCP/IP, FTP), RS-485 Interface ,TFT screen, GSM-modem, heating. 8 user buttons. Analog and digital sensors of temperature/pressure/humidity. Control of single/three-phase mains (definition of frequency, imbalance, health). Control of single/three-phase generator (gas/diesel/petrol). Control wind turbine, solar panel. Measurement 24 battery cells, identify the faulty resistance. Measurement of grounding. Control refueling of fuel tanks (the definition of theft, leakage and other faults). Sending messages about emergency events via GSM, Ethe
$25 USD 在10天之内
5.0 (1条评论)
2.0
2.0
用户头像
I am a Electrical Engineer by education and a Professional Embedded Software Engineer, having experience of working on many microcontrollers including ST. I can deliver your project reliably in the given budget and time. Regards, Rishabh Hardas
$25 USD 在7天之内
5.0 (4条评论)
2.0
2.0
用户头像
I am expert in STM 32 MCU programming and PCB design. I specialized in development of embedded software and hardware for transport telematics, industrial automation, Internet of Things (IoT) fields. For more details see my profile.
$30 USD 在1天之内
0.0 (0条评论)
0.0
0.0

关于客户

ARGENTINA的国旗
Argentina
0.0
0
会员自7月 9, 2018起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。