Find Jobs
Hire Freelancers

MEP (Electromechanical) CAD drafting for Small Villas

$30-250 USD

已关闭
已发布大约 6 年前

$30-250 USD

货到付款
The project consist of 2 Villas including Site plan, each villa (Ground + First floors + Penthouse), Total Build Up area 450 SQM. We provide sketchs (Free hand) design for MEP services: - Electrical submission - Water submission - Drainage submission - Telephone and data submission. The product will be CAD (DWG) drawings including list of drawings, General Details, Plans, Sections, Site layout.
项目 ID: 16003569

关于此项目

34提案
远程项目
活跃6 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
34威客以平均价$162 USD来参与此工作竞价
用户头像
Hi ! Your project is of much interest to me and I would be pleased to do it. During my work, I will provide the ultimate revisions and make all the necessary changes upon request until you are completely satisfied. Best regards, Valentin
$140 USD 在3天之内
4.9 (68条评论)
5.8
5.8
用户头像
Hi I'm MEP design engineer I'll give you all MEP design as per kahrmaa standard thanks hatem
$250 USD 在10天之内
4.9 (38条评论)
6.0
6.0
用户头像
Good at mechanical works and conversant with MEP software. i hope that we can work together on this to do a more elaborate design
$250 USD 在5天之内
4.7 (72条评论)
5.7
5.7
用户头像
I have experienced like drafter CAD for 5 years in Residental, Commercial and Oil&GAS Projects, I believe can help you.
$150 USD 在10天之内
5.0 (7条评论)
5.1
5.1
用户头像
Hello, Saw your project and I am quite interested in undertaking it. I am a MEP services engineer and can complete all the services design required for your villa project. I can assure you of quality work that will meet your requirements. I look forward to discussing further. Thank you, Eric.
$250 USD 在5天之内
4.8 (24条评论)
5.5
5.5
用户头像
Hi, Nice project. I am interested to work on the project. Can you pl. send the hand sketches so that I can understand the project better. I look forward to work with you. Thanks Ananta
$250 USD 在3天之内
4.7 (70条评论)
5.6
5.6
用户头像
Hi! We are a group of complete MEP Engineers with individual specialization to finish this kind of project. Looking forward to working with you on this project. Regards, Jed
$138 USD 在7天之内
5.0 (17条评论)
5.3
5.3
用户头像
I'm a Mechanical Engineer college student, i've already fullfilled my first grade graduation and studying for second grade final graduation. My knowledge abount Mechanical Engineering covers : Applied mechanics Material Study Mechanical resistance and resilience Traditional Machining Cnc Machining Mechatronics and automated systems Themodynamics, and Heat Transmission Energy Systems Fluid Dynamics Economy and Business management Industrial design and management 3Ddrawing Chemistry and Electrotecnic basics I've done projects using the following softwares: Excel Solidworks Autocad Inventor Mathlab Simulink
$30 USD 在2天之内
4.8 (22条评论)
5.0
5.0
用户头像
I am an engineer and i have experience on this project and i can complete this perfectly. kindly view my profile to check my past work. thanks
$154 USD 在1天之内
4.6 (13条评论)
5.0
5.0
用户头像
Hi I am Nouman to assist you in your designing according to DEWA standards. Please give me more information. Regards Engineer Nouman
$500 USD 在3天之内
4.6 (26条评论)
5.2
5.2
用户头像
Dear Sir, I am Fady from Egypt. I am an Arabic native speaker, I can do it with a very high quality. I can start immediately with a low fixed price. My job success score is 100%. I am looking forward to hear from you soon. Thanks in advance, Best Regards, Fady
$100 USD 在3天之内
4.7 (8条评论)
4.6
4.6
用户头像
I am a MEP (Mechanical, Electrical and Public Health) Design Engineer with about 11 years of experience in the industry, 4 in Romania and another 7 in the UK. I was involved in many building services projects including producing utilities drawings so I will be able to commence as soon as I receive details of the project.
$150 USD 在3天之内
5.0 (1条评论)
3.6
3.6
用户头像
Hi, I'm professional Architect & more than 5 years’ experience in construction & design field. I’m expert in AUTO-CAD 2-D DRAFTING and 3-D Building design Interior & Exterior Design and Engineering Drawing work and a/c to demand can be provide all detailing set of drawing like Architectural, Structural, HVAC , Electrical & Plumbing Drawing. I HAVE DONE similar JOB in my previous WORK. I read your notes. I can complete your job within a TIME . I have provide you high qualities detail drawing. Can we connect and discuss more on chat, Thanks & Regards
$250 USD 在4天之内
4.8 (7条评论)
3.4
3.4
用户头像
I can do task on 3d modelling, AtoCAD, Simulation among others. Please message me for a chat. I'll be more than willing to do this
$30 USD 在2天之内
3.4 (5条评论)
3.9
3.9
用户头像
I hold a Ph.D. in architecture and have more than six (6) years experience in engineering field. Am a registered member of ICE and CIOB. I have the ability to work independently with or without very little supervision, and still delivering high-quality services to all my clients due to the level of my commitment. I always love to see challenges, for it makes me showcase what I can do as a problem solver. I also have adequate knowledge on the use of the following engineering tools, such as S-Frame, EPANET, Flow Master, Storm CAD, Culvert Master, and Sewer CAD. My skills evolve around: complex data interpretation, and adaptation to new concept quickly while working under pressure. You can also hire me directly using this link: https://www.freelancer.com/u/dannygist.html Thank you in anticipation.
$30 USD 在2天之内
5.0 (2条评论)
1.4
1.4
用户头像
I have complete knowledge of autocad 2d. Relevant Skills and Experience I have speed for autocad
$138 USD 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, good day. I can help with this project. I am a mechanical engineer with experience in the development of plans and technical documents such as: Bases and design criteria, material specifications, calculations of system air conditioning systems design ducts for air conditioning systems and of course all the associated drawings each of the mentioned systems (floor plans, elevation, isometric). Relevant Skills: I Can do hydraulic calculations I Can do CAD drawing I Can do thermal/energy calculation I Can do BMS specifications I use Hourly Analysis Program HVAC I use ELITE Software Program HVAC I can preparing shop drawings for Hvac and Plumbing individually. I can Preparing shop drawings for Drainage and Water Supply individually. I can Preparing shop drawings for Fire Fighting System. I can Preparing shop drawings for Pump Room Details. I can Preparing shop drawings for External Works of Water Supply, Sanitary,Storm Water system. I can Preparing As-built drawings of HVAC, Plumbing, and Electrical Services. I can Preparing drawings of Mechanical and Electrical Builders work. Please contact me to discuss and review different points of the project. Best regards.
$140 USD 在6天之内
0.0 (0条评论)
1.0
1.0
用户头像
Am currently working as assistant professor. I am good at Auto CAD. I'll do this surly Relevant Skills and Experience Previously I've done many projects like Buildings layout and Automotive layouts
$155 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
Experienced Electrical Engineer working mainly on AutoCAD for CAD drawings and Revit for BIM projects readily to provide all CAD drawings in DWG format for the villas specified Relevant Skills and Experience Various projects drafts made on AutoCAD mainly MEP drafts as i work as Electrical Engineer at a renowned consulting company
$111 USD 在5天之内
0.0 (0条评论)
0.0
0.0
用户头像
We are a firm who work on projects electrical and lighting,hvac, water . If you want we can send you example of some projects. Trajce Nikolov - Electrical engineer Goran Nikolov - mechanical engineer
$222 USD 在3天之内
0.0 (0条评论)
0.0
0.0

关于客户

QATAR的国旗
Qatar
0.0
0
会员自1月 4, 2018起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。