Find Jobs
Hire Freelancers

PLC recommendation and programmin

$8-15 USD / hour

已取消
已发布大约 5 年前

$8-15 USD / hour

Looking for a recommendation on a PLC as well as programming for a very simple automation project. I have 1 pneumatic cylinder and I pneumatic turntable that I need to be able to control. process: Turn System on (illuminate GREEN LIGHT) Detect signal from a pressure sensor (Illuminate RED Light and turn of Green Light) control cylinder 1 to oscillate x times (10 initially. need to be able to easily adjust a variable to control the speed of the oscillation. Once oscillated x times, rotate turn table. Repeat oscillation process as above. and stop at completion Wait until pressure switch is released and then pressed again and start all over. (Turn off Red Light and Turn on Green Light)
项目 ID: 18506492

关于此项目

20提案
远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
20威客以平均价$18 USD/小时来参与此工作竞价
用户头像
Hi There I have checked your project description and understand everything. I am very confident that i can do this project perfectly. Thanks
$11 USD 在40天之内
5.0 (106条评论)
6.3
6.3
用户头像
Professional Eplan electric p8 user. Electrical engineering. Project management. PLC programmer. Scada designer.
$12 USD 在40天之内
4.9 (14条评论)
6.1
6.1
用户头像
Hello. I am electronics automation enigneer and have experience with PLC programming. I would like to do this simple task for you. For this task I would recommend you use Click PLC from "automation direct". I have used this for various US and Canadian clients and always got positive feedback. Kindly check automation direct webportal where you will find a suitable PLC in affordable price for small projects. I can also help you find one if you need. Programming your task is also very simple and I can do this quickly. Let me know if you would be interested in discussing details. Thanks
$15 USD 在40天之内
5.0 (11条评论)
5.3
5.3
用户头像
Hello, I think I can help you, your description is quite detailed, thank you very much, but I am sure that we will have to define a few more details. I have extensive experience in PLC programming of various kinds, in that I am an expert, but the expert in your business is you and therefore you understand better what you want to achieve and what will make you feel really satisfied, I want to understand that also and help you achieve it if you allow me to contribute with my experience. By the way, please tell me about my bid, maybe I can improve it if we do business.
$15 USD 在40天之内
4.2 (10条评论)
4.7
4.7
用户头像
Hello there, I understand that you need to get designs and PLC programmer for your product, I'd be more than happy to help you with that. I have 5 years experience in PLC, SCAD A, HMI program development and site commissioning. worked on various platforms of automation family's Siemens, Schneider, Delta, LS and others. Please feel free to contact me so we can discuss your project in more details. Regards, Ahmed
$10 USD 在22天之内
5.0 (2条评论)
3.1
3.1
用户头像
As per your description, you need: - 1 AI: pressure sensor - 3 DI: pressure switch, ON button, OFF button - 1 AO: oscillation process - 4 DO: Red Light, Green Light, cylinder, turntable A Simatic S7-1200 CPU 1215C can greatly do the job. However I can program any other brands that reach the same goal with better service/price ratio: ALLEN BRADLEY (RsLogix), SCHNEIDER (UnityPRO and Wonderware Indusoft), Omron (CX-One), Panasonic (FPWin GR). Many clients benefited my experience as a bilingual mechanical engineer. My expertise focuses on PLC and industrial automation in various industries: steel, water processing, FMCG. I am competent in all major PLC & Scada automation systems. I'm familiar with all IEC 61131-3 languages: Ladder, FBD, STL, SCL, Grafcet. And I can also deliver process vizualisation HMIs or SCADAs. My qualities as a person rely on transparency, exemplarity and duty. I'm challenge driven and dedicated to fully deliver your project.
$20 USD 在40天之内
5.0 (1条评论)
1.7
1.7
用户头像
hi sir, I've the pleasure to work with you in this project I'm 20 years experience as automatic control engineering I've great experience in TIA Siemens software and can do this project with it for plc and scada
$14 USD 在10天之内
5.0 (1条评论)
0.7
0.7
用户头像
I am expert in step s7 simens and writing ladder with sequential process and know functional block and how to control sensors and hydraluic and pneumatic cylinders
$11 USD 在16天之内
1.0 (1条评论)
1.1
1.1
用户头像
Dear friend! Ready to help.I'm an electrical engineer.I design electrical circuits in the ePLAN program, program PLC, drive, operator panel.
$8 USD 在40天之内
0.0 (0条评论)
1.5
1.5
用户头像
Good Morning, I’d propose a low cost, high value PLC that includes an integrated HMI touchscreen as well as the required digital inputs and outputs, which appears you would have about 4-5 outs and about 1-2 ins. The PLC/HMI combo would cost under 1k, the rest would be my hourly cost for the design, ladder, and integration if you so desire that as well. Best Regards, Arnie
$116 USD 在5天之内
0.0 (0条评论)
0.0
0.0
用户头像
You can put your trust on a young but most experienced candidate on PLC and SCADA programming. It can take only one week to finish this project. I will only need 4 hours per day Relevant Skills and Experience HMI and SCADA commissioning. PLC programming Relay programming Programming PLC to control a reboot.
$12 USD 在20天之内
0.0 (0条评论)
0.0
0.0
用户头像
i can work at a plc programmer i.e allen bradley, seimens ,scada i.e intouch ,and hmi and i have a knowledge of python language and C .
$12 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
I have a working experience of more than 12 years in PLC and HMI project. I could definitely help you to recommend the system design which will be optimized to satisfy your requirement. Let me know if you have any question regarding the process or implementation.
$18 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi! I'm automation engineer. I propose you to select logic relay, such LOGO! from Siemens or MIcro810 from AB. They is cheap and have enough resourcesfor your task. LOGO! have embedded LCD display. It make possible to change number and time of oscillating without reprogramming. This is very suitable during setting-up phase. I can do programing Siemens, AB, Schneider logic relays and PLC for your choice. Best regards
$12 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello - My name is Kyle and by job title I'm a maintenance engineer. Having mechanical, electrical, and automation engineering knowledge with the hands on experience allows me to provide a unique, one stop solution for many projects. Experienced with various PLC manufacturers and can program in ladder logic or FBD. Would like to discuss your project in further detail. Hope to hear from you soon and looking forward to assisting you with your project. Thanks, Kyle
$13 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
el programar plcs es mi trabajo dia a dia y por ende soy el candidato ideal para realizar este proyecto
$8 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello. I would like to join your project. I have good knowledge about Siemens PLC like as S7-1200/1500, S7-300, S7-400H, B&R PLC like as X20 system and Safety system, GE RX3I, AB ControlLogix and Compact Logix. I have experience developing projects in Tia Portal (v12/v13/v14), Step 7 + WinCC, PCS7, Automation studio (V3/v4, AB RSLogix, GE Machine Edition v8.5 and etc. I can offer you a very cheap solution for various platforms if it is necessary ( Siemens, BR - it depends on the country and requirements). if it is necessary, I can send you examples of my projects
$16 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi, I recommend use Allen Bradley PLC, model micrologix 1100. I have 10 year of experience in industrial automation with Allen Bradley PLC (SLC 500, PLC5, Micrologix, CompactLogix, ControlLogix, etc), industrial network and Scada solutions in solution provider company of Rockwell Automation. I have programmed PLC for complex projects. Do you need that this PLC to communicate with an operator panel? I can also support with the electrical design. My proposal is 16 HH Regards, Ricardo Apaza
$15 USD 在40天之内
0.0 (0条评论)
0.0
0.0
用户头像
this is not problem this is very easy project, these project may be i will do free...! so there for you trust me and take me this project i have no debit card there please pay me amount throw online after completion as you wish
$8 USD 在40天之内
0.0 (0条评论)
0.0
0.0

关于客户

UNITED STATES的国旗
Mesa, United States
5.0
3
付款方式已验证
会员自9月 3, 2011起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。