rf transmitter and receiver with gprs

Hi sir, We have read your pdf file and we are able to do this project for you. Lets talk to us. We are professional engineers and developers who do such projects from the last 10 years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are team of professionals with 10+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working product. If you wish we can discuss details in chat. Thanks

HI there i am an electrical engineer with 8+ years of experience. I have vast experience regarding PCB designing and development. I can provide gerber and manufacturing files. I can design this system for you. Let me know if you are interested

Hello, I am Anthony from Sri lanka. I have 7 years of experience in the filed and I am very much interested in your project. I HAVE ALREADY DONE MOST PARTS OF YOUR PROJECT. I AM USING MPU6050 AND ARDUINO NANO. BUT IF YOU WANT I CAN SWITCH TO STM32. CAN I SUGGEST A DIFFERENT RF TRANSMITTER ? ITS RELIABLE AND WE ARE ALREADY DEVELOPED THE HARDWARE AND THE CODE WITH IT. IT CAN WORK UP TO 500M. THE BATTERY WE HAVE BEEN USING IN THE SAME KIND IF DEVICE IS LIPO 18650 AND IT CAN RUN THE DEVICE FOR 6 HOURS CONTINUOUSLY. SHALL WE USE SIM800 FOR GPRS ? BUT THE ONE THAT YOU HAVE SUGGESTED IS ALSO OK WITH ME. I CAN DEVELOP A PROTOTYPE AND ALSO SEND YOU A WORKING DEVICE TO TEST. Why you should hire me ? * As a full time freelancer I have my own PCB fabrication work shop and testing lab. So there is no problem doing live tests with you after the device has been developed. * My workshop is equipped with CNC machine, FDM 3D printer and DLP 3D printer. So there is no problem designing and printing plastic parts you required. Please contact me if you are interested. Thank you Anthony

We did such a project, there are ready samples for demonstration. The microcircuit CC1310 is used (as in the description provided), the GSM modem SIM800, also an accelerometer and a gyroscope are installed on the board. I can send a photo by mail, the firmware is ready. Required to adapt to your dimensions. We will be happy to help you.

Hi, I'm Embedded System Engineer. I have experience developing product prototyping, PCB design&layout, firmware and C/C++ applications in Windows and Linux OS. I have proficiency in the following technologies and tools: - MCUs (+ Ethernet, BLE, WiFi): STM32, LPC, PIC, ATMEL, nRF51822, CC2540/CC2541, ESP8266, ESP32. - Platforms: Arduino, Mbed, PlatformIO. - SBCs: Raspberry Pi, Beaglebone Black, Asus Tinker Board, Odroid, etc. - IDEs: Eclipse(and based for MCU), Qt Creator, Mplab X, Atmel Studio, Atom, etc. - EDAs: KiCad, OrCad, Eagle, Proteus. - Technologies: BLE (becons), WiFi, GPRS/GSM, RFID, IoT, LoRa. - Others: Makefile, scripts, OpenCV, Python, CNC machines, PostgreSQL. It would be a pleasure to work together in this project and be able to share my experience in the development of systems. Regards! Jhon Zumaeta

Hello, My name is Andrei, i am a Romanian IOT Developer with a lot of experience in IOT projects and automatics . I have read the requirements of the product , for low power , i propose you to use a memory and to send data every 10 minutes . I can work with all types of Microcontroles programming in C , C++ , Mikro C , CCS C , Atmel Studio , Arduino , gcc . Creating Schematics and PCB in Kicad , Eagle , EasyEDA and Proteus (+simulation). i have an workshop full of parts and the infrastructure to build PCB and test the solution end to end using special tools (Spectrum analyzers , oscilloscope , logic analyzers ) Derivable on the project : Wiring diagram for prof of concept . Schematic design PCB Design Gerber files for manufacturing MCU code explained every line . As an additional service i can make you a full working prototype and ship to you. Regards, Andrei

Hi. I'm an electronic engineering student from Argentina. I've been working in freelancer.com for more than two years, and I've completed more than a dozen projects, all with good recommendations, you can check my profile. You will get from me the best effort to deliver a project that is up to your expectations and receive a good rate from your part. For this specific project, we will need to discuss a way for me to receive a sample of the board you attached in the PDF for development, I can provide Schematic + PCB design + GERBER files for production. Also the required firmware. Please, if you have any questions, feel free to ask me! Regards, Esteban.

i am interested to do your project. i want to discuss some parameters about project. it would be my pleasure to work with you.

I DO NOT OUTSOURCE I have been a freelancer for the past 8 years, I believe that my experience and skill in this background will prove to be of great help to you. Contact me to discuss more on the details

Hello, I have previously worked on a project very similar to yours in which I was using an stm32 microcontroller, SIM808 GPRS module and the ax345 accelerometer powered by a battery. Additionaly I have previously made pcb gerber files. Given my experience I am confident I could complete your project quickly and efficiently

Hello, I am an electromechanical and electronic technician, and I only have the thesis to be an electronic engineer. I work in an electrical testing laboratory, under international standards, im work here for more than a year ago. I have experience in electronics design. If you want to know something else, do not hesitate to contact me I think it could be of great help for your project. I am already at your disposal. regards

Hi, Found out that you are looking for a developer to implement a solution with transmitter and receiver to send gyro data with minimum power usage and send those data to web server using the receiver. I can do that for you sir. I have worked with RF modules and as well as arduino, STM32 and Raspberry Pi 1) Developed an car security system using arduino uno, Sim808 module and gps to track and control a car 2) Have worked with MPU6050 to implement a step counter and a real time mapping system 3) Have wireless communication experience with BLE, Bluetooth Classic, TCP/ip, MQTT and RF I can complete the project within the requested time with no bugs. I will support my code life time for free Thank you

Dear As I am a senior software developer, have rich experience with various application development using C#, VC, VB.Net, NodeJS, Matlab, java, and python If you are interested with my proposal, please let me know it. I hope to work with you on this project. Thanks.

Hello, I have got involvet in many microcontroller projects (including arduino) and designed and made simple PCBs. The construction is mainly modular so it won't give as too much trouble and get woried about RF design black magic ;-). I can provide you with the code and gerebers for both the remote sensor and the base unit. But I have some important questions: 1) Is it a prototype or one off design or it should/could be mass produced? 2) Is it necessary to use the speciffic transceiver ? What about the required range? I could give you a much quicker delivery but there is some time to wait for the PCBs to get made. Feel free to contact me.

Hi, we are from dsp labs and we have been working on this project so far. So i have the code and evrything to make it work for you. Lets do it

I have experience with several microcontrollers projects and coding. I have developed a similar project gprs transmitter and receiver with temperature data.