Find Jobs
Hire Freelancers

Microcontroller Based Embedded Project

₹37500-75000 INR

已关闭
已发布超过 4 年前

₹37500-75000 INR

货到付款
We are looking for an experienced embedded engineer with good exposure on microcontroller based projects. Should have good experience in PCB design and layout. Should be able to work on a tight schedule with quick turn around times.
项目 ID: 20349028

关于此项目

42提案
远程项目
活跃5 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
42威客以平均价₹57,854 INR来参与此工作竞价
用户头像
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs, CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for electrical vehicles ,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
₹150,000 INR 在40天之内
4.9 (51条评论)
6.6
6.6
用户头像
Hello As you can see in my profile I'm an electronic engineer with ten years experience in electronic design including PCB layout and Firmware development. The main advantage of hiring me is you will have a high-quality solution always between deadlines and without needing to be over it. When I take the project after asking all the relative questions you can be free because before the deadline you will have the work done. I'm here to simplify your experience. Please, take some minutes to interview me and tell me what are you needing so I can give you an accurate budget and delivery time. Thanks in advance, Julian.
₹55,555 INR 在15天之内
5.0 (25条评论)
6.4
6.4
用户头像
Hello, I have 6+ years of experience in the field of electronics engineering and programming. I work 14 hours a day. I can quickly finish any kind of embedded programming and PCB designing in a very short time frame. I have experience of many PCB designing software. Message me for further discussion of my skills and qualification and project requirements.
₹37,500 INR 在2天之内
4.8 (53条评论)
6.1
6.1
用户头像
Hi I have 12 years experience. I can support in PCB design and prototyping boards also. Regards Senthil Chennai, India
₹50,000 INR 在40天之内
5.0 (11条评论)
4.8
4.8
用户头像
I have more than 6 years experience in embedded systems and PCB design with eagle and altium design software . so I can do your job within a time limit with your satisfaction.
₹83,333 INR 在10天之内
4.8 (9条评论)
4.8
4.8
用户头像
Hello, I am Arun Prakaash, PCB Designer. I have 3 years Experience in designing. I am using Altium Designer to design a PCB. I will design a PCB with 3D model and BOM. I don't have experience on Embedded programming but I have designed PCB for Embedded projects. I need schematic diagram to design a PCB. I will send my sample PCB works in chat. Output Files: 1)Gerber files 2)NC Drill 3)PCB PDF(Layer wise) 4)3D PDF & 3D Step 5)Mechanical Drawing 6)Assembly Drawing 7)Bill Of Materials with updated Quantity Available in Digikey or Mouser. 8)Top and Bottom View Drawing 9)Whatever file as per requirement.
₹37,500 INR 在7天之内
5.0 (12条评论)
4.3
4.3
用户头像
Hello there! I would like to be considered for this project, I have 8 years of professional experience in embedded systems development. I have designed many PCBs layouts. I believe I am the best candidate for this project. If you need any info to secure this bid , please let me know. Kind regards, Sadiq Amin
₹37,500 INR 在3天之内
5.0 (8条评论)
4.1
4.1
用户头像
Hi sir, I understand your requirment I have a large experience in pcb design, schematic draft , manufacturing and production Please feel free to check my profile and I always support "first time right design". I have done up to 16 layer high speed layouts. So i believe to assist you perfectly. I'd like to hear from you soon. Best Regards
₹56,250 INR 在7天之内
4.7 (13条评论)
4.5
4.5
用户头像
Dear Sir, I am an experienced embedded system developer. I would like to provide my full effort for your valuable project. Best Wishes
₹56,250 INR 在7天之内
4.8 (6条评论)
3.5
3.5
用户头像
Neocent / Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirements; along with maintaining the highest standards of operation throughout all project areas from start to finish. Our Services: - Engineering Design & Drafting - CAE Services: CFD and FEA - Matlab and Embedded Systems - HVAC systems - Reverse Engineering - Rapid Prototyping and Product Design - Value Engineering and PLM Services - Technical Documentation - PCB Designing - Industrial Automation At Technoledge, we aim to achieve our vision by placing emphasis on ensuring that our offerings meet the following criteria; Agility, On time Delivery, Superior Quality, Cost Effectiveness and Great Efficiency. A continuous learning culture among the team enables and guarantees continuous innovation in the business
₹55,000 INR 在5天之内
5.0 (3条评论)
3.2
3.2
用户头像
Hello and Greetings, I am Malik Umair, an Electronics Engineer and Programmer with an ample experience in Embedded Systems and PCB Layout Designing. I have designed several project for university students as a part of their FYP which uses I2C protocol and SPI Bus. Reason for bidding low is to earn trust and credibility from clients about my ability and I have limited portfolio to show. I can provide you robust solution in your project and extend my support even after delivering all the code and schematic diagrams. I hope to get in touch with you soon. Sincerely.
₹37,500 INR 在10天之内
4.1 (6条评论)
3.8
3.8
用户头像
I hold master degree in instrument tech and having about 35 years of expertise in real time embedded hardware and software applications. I don't have exposure to PCB design
₹56,250 INR 在7天之内
5.0 (1条评论)
2.0
2.0
用户头像
Hi I read your job description according to that I am sending my expertise in the IoT domain. I have 3+ year of experience in the followings:- I can efficiently program with Microcontrollers that includes Arduino and Raspberry Pi. ~~~ 2+ year of experience in AWS IoT and Azure IoT. ~~~ Expert in AVR programming with JTAG skills. ~~~ Worked with various available shields for Arduino. ~~~ Worked and interfacing all type of LED, LCD. ~~~ Sensor and Device Interfacing. ~~~ Experienced in developing GUI based applications with PyQt. ~~~ Worked with MQTT an IoT Protocol. ~~~ Worked with Sim900A and Sim800A Modules. ~~~ Comfortable with C, C++, Python Programming ~~~ Worked on custom IoT based Android Applications connected using HC05 ~~~ Tools Used - Fritzing, VNC Viewer, Node-RED ~~~ Integrated and worked on communication protocols such as HTTP, REST API - JSON, Web Sockets, Social Media API’s Moreover, worked and used OpenCV, Yocto (for image creation), ESP8266 / ESP32 modules. Regards Harshvir Singh
₹50,000 INR 在4天之内
4.6 (2条评论)
2.3
2.3
用户头像
Hello, I have 6+ years of industry experience in embedded systems design and development. Presently I am a full time freelancer and based in Mumbai. Well versed with all stages of embedded product development from hardware design, PCB layout to firmware for embedded systems. The present quotation and proposal is tentative and to be finalized after thorough discussion and understanding of project requirements. Please browse through my portfolio for sample of work done. For any queries/clarifications and more background information you can inbox me. Regards, Nasreen
₹56,250 INR 在7天之内
5.0 (1条评论)
1.9
1.9
用户头像
Hi I read your project and I posses the required skills that you require. I have 20 years of experience in embedded programming and PCB design. We can discuss further over chat. Regards
₹72,222 INR 在30天之内
5.0 (2条评论)
1.6
1.6
用户头像
Hello Dear, We will help you to make your IOT projects as per as you describe the requirement of PCB design and layout. We have others lot of experience in firmware development and Simulation design of various kinds of IOT devices using ESP8266, Raspberry Pi, Arduino, WiFi, LAN, BLE module, RF module, FPGA, ARM CortexM0, M4, STM32, Atmega, PIC, MQTT, web and mobile application and several kinds of sensors. So, we hope you are giving an opportunity to make your project. BR
₹50,000 INR 在10天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi I'm a qualified Electronics and Communication Engineer. i' currently working in network domain. i would like an opportunity to work on the project. thank you regards Anup Xavier
₹60,000 INR 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
i work on may micro-controller such as ARM, ESP-series, STM32 Series, AVR, PIC , arduino and raspberry pi as well as analog electronic circuit designing.
₹56,250 INR 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
I'm an electronic engineer with more than 15 years of work experience. I work as HW designer; FW and SW developer. As HW designer, I work in Altium, KiCad and Orcad and I have experience in development single MCU (Microchip PIC and ARM Cortex) boards with several digital I/O (GPIO, UART, SPI, I2C, PWM,....) and some analog I/O. I design complete board: power section, MCU section, peripheral section,.... I design also boards with battery power; so I have experience in low power PCB design. I have also experience in commercial boards (Arduino, Raspberry, Beaglebone,...) shields design. I have also experience in bluetooth (both 2.0 and 4.0) PCB design. As FW developer, usually I work in C for Microchip PIC (MPLAB X + XC compilers) and Eclipse + GNU ARM for different ARM Cortex M3/M4 manufacturers (STM32Fx, NXP, EFM32 SiLabs, but I'm ready to learn new frameworks). I work both single task and multi task environment (FreeRTOS and RTX). I write code both for low level driver (GPIO, UART, SPI, I2C, PWM....) management, for high level/final application, for bootloader and for OTA. I work also in "C code" commercial boards Arduino/ESP32/ESP8266 and Linux embedded commercial boards (Raspberry and Beaglebone). I have also experience in bluetooth (both 2.0 and 4.0) programming. As SW developer, I work in C, C++, .NET, Java, and lot of others programming languages. Mainly I work for Windows O.S., but I have experience in Linux development too.
₹56,250 INR 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear Sir, We are a team of engineers from Kerala having experience in Embedded systems, IoT , Power Electronics and PCB design. We did many projects in Embedded systems. Our Key areas are Given below. We are interested to work with you and waiting for your reply Firmware Development : C,Embedded C, Assembly, RTOS, Linux, Python Micro Controllers : 8,16,32 bit : Atmel, AVR, Microchip, Renesas, STmicroelectronics, ARM, Cypress, Texas Istruments IDE : Keil, CCS C Compiler, CCS, AVR Studio, MicroC, HightechC, MPlab, CooCox CoIDE, CodeWarrior IDE, OpenCV, TrueSTUDIO, SW4STM32, PSoc Creater μC Communication Protocols : UART, USART, USB, SPI, I2C, I2S, Modbus, CAN, RS485, Ethernet Wireless IoT Network Protocols Bluetooth, BLE, Wifi, Zigbee, LoraWan,6LoWPAN, GSM, RFID,
₹70,000 INR 在45天之内
0.0 (0条评论)
0.0
0.0

关于客户

INDIA的国旗
BENGALURU, India
0.0
0
会员自7月 16, 2019起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。