Find Jobs
Hire Freelancers

PCB DESIGNER

$250-750 USD

已关闭
已发布超过 3 年前

$250-750 USD

货到付款
Designing fire alarm systems for twenty years for the UL market place looking for an experienced PCB designer to make changes to GERBERS files "two". To change the look and physical size of the PCB.
项目 ID: 27898427

关于此项目

29提案
远程项目
活跃3 年前

想赚点钱吗?

在Freelancer上竞价的好处

设定您的预算和时间范围
为您的工作获得报酬
简要概述您的提案
免费注册和竞标工作
29威客以平均价$464 USD来参与此工作竞价
用户头像
Hello I am experienced electronics engineer with more than 14 years of experience in PCB design. I have expertise in all CAD tools including Altium designer, Allegro, Orcad , KiCAD and others. I have read the details and would like to discuss it further. Please get in touch to discuss it further Regards Ali
$500 USD 在7天之内
4.8 (273条评论)
8.0
8.0
用户头像
Best PCB Design Expert at your doorstep! Dear Client, I have seen the image and could do it for you. I can make changes to GERBERS files "two". We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. We have experience in alarm systems based PCB design and know all the intricacies required to get the job done with perfection. With more than 15 Years of experience in PCB Design and Circuit Design in Altium, We can ensure you best quality work and before time delivery. Following is a brief list of expertise that we are carrying: 1. IOT products development 2. Microcontrollers based circuit design – STM32, STM8S etc 3. Smart Products like Smart watch - GSM/GPRS/GPS etc 4. Wireless Products - BLE/WiFi- ESP32/ESP8266/NRF24L01 5. Low Power Battery Products design – Rechargeable and Non chargeable 6. Power Electronics – Buck, Boost, Flyback etc 7. Alarm system, Gerber file Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? 4. Are there any other specific requirements besides the ones you mentioned Let’s have a quick discussion for 5 mins where we would formulate a plan of action of how we shall take this project to the horizons of success. Regards Avi Tech Experts Quality is never an Accident
$500 USD 在2天之内
5.0 (60条评论)
7.8
7.8
用户头像
Hello, thank you for your job posting. I read your description about--PCB EXPERT I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks
$300 USD 在2天之内
5.0 (211条评论)
7.3
7.3
用户头像
Hi. I am a professional PCB designer with rich experience over 10 years. I will finish your project in a short time perfectly. Please let me discuss about your project in detail. Best regards, Andrii.
$300 USD 在3天之内
4.9 (40条评论)
6.6
6.6
用户头像
hello dear, i am a professional elecctronics electrical engineer and havw been working since many years as i have done many projects just text me so i can help you in your task kind regards
$250 USD 在1天之内
4.9 (147条评论)
6.2
6.2
用户头像
hello sir, how are you. I read your proposal and i am interested in this project. I am an Embedded engineer (ARM, PIC, AVR, Arduino, SOC BLE (bluetooth) chips, ZigBee, WiFi, GPS, LED, LCD display etc.) and PCB designer (Altium, KiCad, Orcad), 3D Modeling. You can check my profile for more information. I can do this project as per your requirement. I hope you will consider me for this project. I am waiting for your reply...... thanks with regards Preetpal Singh
$250 USD 在7天之内
4.8 (51条评论)
5.5
5.5
用户头像
Hi, I am electronics engineer and have experience of circuit designing and PCB. I can do your task, feel free to inbox me for your task.
$500 USD 在7天之内
4.8 (47条评论)
5.5
5.5
用户头像
Best PCB Design Expert at your service! Dear Client, I can design fire alarm systems for twenty years for the UL market and make changes to GERBERS files. After going through your project details, I am happy to inform you that these are an exact match with my skillset and experience I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have experience in fire alarm systems and could design it for you as per your requirements. I am having more than 15 years of experience in PCB Design, Circuit Design, Circuit simulation, IOT products development and building electronic products. The expertise of mine is in the following fields: 1. Wireless Products – BLE, Wifi, NFC, LoRa etc 2. Power Electronics- Buck, Boost, Flyback, Half Bridge etc 3. IOT sensors interfacing – Pressure, Temperature, Moisture, PH etc. 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. GSM, GPS, GPRS 6. Fire Alarm Systems After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? 4. What are the standards that the product would be complying to? Lets have a free of cost call where I can formulate a success plan for this project. Waiting for your reply, Regards Hari Mohan Engineering for one is a magic for others
$500 USD 在2天之内
5.0 (5条评论)
5.2
5.2
用户头像
Hello Sir. I can complete this project perfectly. I have 10 years good experience of hardware development. I have completed a variety of embedded system design and programming by using microcontroller, arm, etc Board PCB design have been completed by using Altium and Protel99SE. Hope to cooperate with you.
$300 USD 在7天之内
5.0 (7条评论)
4.7
4.7
用户头像
Hello. My name is Mehmet and I’m from Turkey. I used to work the company producing fire detection systems. I have experience multilayer pcb. If give me projects information we can talk more detail. Thank you.
$667 USD 在7天之内
5.0 (3条评论)
4.2
4.2
用户头像
Hi there, We can help you in this project. Kindly spare 10 minutes for the interview. My name is Jaspreet & I'm part of larger embedded hardware and firmware development team. We have already developed many electronic products:- GPS Controlled Relay Event status using CC1310 chip Prayer Watch Wireless Alarm System Power Bank Camera slider controller Wifi home automation Bulb with remote control Curtains with remote control Automatic flush control Smart watch for hajj We will be glad to hear from you! Regards, Intellisense Technology
$280 USD 在15天之内
4.9 (3条评论)
3.9
3.9
用户头像
I've 10+ years of experience in Hardware Board design I can support your request. Please let me know if you are interested.
$1,000 USD 在10天之内
5.0 (1条评论)
3.8
3.8
用户头像
Hi. I am a Electrical Engineer and Matlab Expert I have many experiences in C/Machine language/Matlab/Python,Algorithm Simulation programming, software Architecture and Deep learning I am sure I can do it. You will get the best results if you hire me. Waiting for you in the chat window. Thank You
$500 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
Dear sir, I have interested about this type of work I have enough knowledge about pcb for fire alarm system
$500 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hi, ı am deeply experienced engineet in this area, I can do this project very fastly, I can say thay ı can support immediately, If you have any questions,don't hesitate to contact me.
$250 USD 在3天之内
0.0 (0条评论)
0.0
0.0
用户头像
more than 12 years experience in the field of pcb layout and design programing skills microcontrollers and android apps
$600 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
I will send the results within 5 days after the proposal approval. I will send you the work delivery including design and software.
$389 USD 在5天之内
0.0 (0条评论)
0.0
0.0
用户头像
Hello, I'm Mehmet Can. I have been working as an electronic R&D engineer in the defense industry for years. I do the topics you say professionally in my business life. I am very excited to work with you and take part in this project. Please contact me for information and support about the project. I can complete this project as soon as possible with a professional work. I can complete this project right away.
$380 USD 在7天之内
0.0 (0条评论)
0.0
0.0
用户头像
pls help to share design or circuit that you have or if you want to design from scratch we can design but need input on which type of sensor you need to develop ..
$667 USD 在10天之内
5.0 (1条评论)
0.0
0.0
用户头像
i am expert in analog and digital circuit and PCB design with more than 20 years experience. pls give me chance to design your project. my fee is 15$ per hour
$500 USD 在7天之内
0.0 (0条评论)
1.0
1.0

关于客户

ISRAEL的国旗
Givatayim, Israel
5.0
19
付款方式已验证
会员自11月 30, 2015起

客户认证

谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。