We are looking for a Cisco tech that can re-program a Cisco Catalyst 4948-10GE switch. Here is a brief description of what we are looking to do. If you have any other suggestions we would welcome them.
We are moving to a fiber network and need to program this switch as a Layer 3 device to provide about 4 / 5 Vlans with a P2P connection to MetroE Fiber. We want each Vlan to provide connections to a range of IP’s from our static /24. Each Vlan would have 8 ports assigned on the switch – so we can plug a port within a vlan to a specific firewall device(s). We would also like the newest firmware (currently running ios 12.2(25)) and management ports set up for admin. Security and basic routing tables need to probably also be created. Once this switch is programmed and running we plan to place another switch (same type) as a redundant HA (High Available) appliance for redundancy.
33 威客就此工作平均出价 $164
we need one / 30 public IP for wan connection with ISP. 8 subnets of /24 for 8 valns , we need to determine the ports on which those vlans need to be allowed and also which port need to be in trunk mode