URGENT ORDER

已取消 已发布的 6 年前 货到付款
已取消 货到付款

Solid modelling project

complete the overall design and the design of the various vice components

from the diagrams provided. More specifically you are required to:

1. Create parametric feature-based solid models for all the components either shown or

listed in the following pages. This includes the rubber jaw protectors.

2. Create an assembly model showing all parts in their working position when the opposing

faces of the hard jaws are separated by 30 mm and when the ball to screw distance is set

at 55mm.

3. Set up a parametric relationship equation between the Base and the Clamp to satisfy the

design requirement as outlined in the Background information above.

2 MEC2304 – Solid modelling

4. Produce an engineering assembly drawing of the vice as configured in 2 above. In

addition to the orthographic views the drawing should also include a 3D view, title block,

parts lists, and other information generally shown in assembly drawings.

5. Produce fully dimensioned engineering detail drawings for the parts listed below:

• Base

• Swivel jaw

• Sliding jaw

• Clamp

• Guides and bushes

• Rubber pad with the metal lug

• Jaw inserts and jaw-face protectors

Specify appropriate surface finish requirements, general tolerances, and other information

normally shown in a detail drawing. Also include a 3D view of the part in addition to the

orthographic views or view.

6. Nominate and justify suitable fits and tolerances on a separate A4 sheet for the following

mating parts / features:

• Bush / jaw bush hole / guide pin

The basic size and tolerance sizes for each fit should be included on the sheet. The

tolerance sizes should also appear in the detail drawings.

Guidance on the Project

The diagrams provided show limited details and in many cases the dimensioning of the details

3D建模 CAD/CAM 有限元分析 机械工程 Solidworks

项目ID: #15445645

关于项目

6个方案 远程项目 活跃的6 年前

有6名威客正在参与此工作的竞标,均价₹1483/小时

hany74

Hello, I'm a mechanical engineer with good skills in Autocad, Solidworks, and Sketchup. Relevant Skills and Experience I'm able to create 2D drawings and 3D models from scratch, modifying, and finalizing. I can c 更多

₹1750 INR 在2天内
(8条评论)
3.9
SurajG007

Hi, I will create the 3d Parametric model using inventor software. I will provide you all parts and manufacturing drawing also. Please provide reference sketches or files Thanks

₹1500 INR 在2天内
(12条评论)
3.1
malleshmadhu79

A proposal has not yet been provided

₹1750 INR 在5天内
(0条评论)
0.0
sanjeetkumar632

I think I am Better Choice for this project because I done lots of projects containing assembly Relevant Skills and Experience CATIA V5-Part Design, Surfacing, Assembly, DMU Kinematics, Analysis. Solid Works- Part Des 更多

₹1300 INR 在2天内
(0条评论)
0.0