Freelancer标志它是如何运作的 浏览工作
登录 注册
发布项目
个人资料封面照片
您正在关注
关注用户错误。
该用户不允许他人关注他们。
您已经关注了这个用户。
您的会员计划仅允许0个关注。升级在此。
成功取消关注
取消关注用户错误
您已成功推荐
推荐用户错误。
出问题了，请刷新页面并重新尝试。
电子邮箱已成功验证。
用户头像
$5 USD / 小时
SAUDI ARABIA的国旗
unayzah, saudi arabia
$5 USD / 小时
目前这里是11:19 下午
十一月 3, 2018已加入
0 推荐

Ahmed S.

@Ahmed2050Sayed

 5.0 (2条评论)
2.4
2.4
0%
0%
$5 USD / 小时
SAUDI ARABIA的国旗
unayzah, saudi arabia
$5 USD / 小时
100%
工作已完成
100%
在预算内
100%
按时
25%
重复雇用率

Civil Engineer,Structural Designer,Quantity Survey

I am having more than 6 years experience in Building design, Structural engineering and making Floor plans and Structure Analysis for buildings , homes , sumps , tanks and Structure Analysis for Post tension slabs and beams. I hope you will get benefit from my talent. My expertise lise in Structural engineering, civil engineering, estimating/quantity surveying, modeling and Designing. My proven, effective communication skills. Software Capabilities: Auto CAD , STAAD PRO , ETABS , SAP 2000 , SAFE , ADAPT Builder , RAM Concept , Risa Connection , Autodesk Revit & Tekla Structure . Codes Familiar with: ASCE , AISC , ACI , ECP & Euro code. Consider the following highlights of my qualifications:- Preparing of floor plans in Auto Cad and facilitating success for quality focused projects through expertise in Auto CAD. I having experience in STAAD Pro for load analysis I having experience in SAP 2000 Pro for load analysis and modeling. Feel free to contact me for more information.
Freelancer Civil Engineers Saudi Arabia
查看所有Civil Engineers在Saudi Arabia

联系Ahmed S.询问您的工作详情

登录并通过聊天讨论所有细节。

文件夹

10285445
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
6099805
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
6020383
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
6020252
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
6020218
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
4891397
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
10285445
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
A complete structural design consisting of the following: 1- The building consists of 4 floors and event halls with a height of two floors and an approximate area of ​​10,000 square meters. 2- First floor service rooms. 3- The second floor is a banquet hall and the roof is structurally composed of a hurdy roof in addition to the main bridges. 4- The third floor, service rooms. 5- The fourth floor is a banquet hall and the roof structurally consists of a metal roof in a diagonal way to both sides, which allows for a safe and economical design. 6- The foundations are striped bases connected to each other by means of pedestals.
STRUCTURE DESIGNING FOR WEDDING HALL IN IRAQ
6099805
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
The structural analysis of the Building was carried out using the Finite Element Method (Program SAP 2000-3D modelling). A 3D- FEM was constructed considering the rigid joints between walls and floors. Dead load, super imposed dead loads,Water load and Earth Pressure were considered as uniformly distributed loads.I did Calculation Sheets for consultant to approve it.
Design of Sump with Valve Room by using SAP 2000.
6020383
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
RESIDENTIAL BUILDING _ Dubai – UAE -Project is consist of (G + P2 + TYP.6 + ROOF) and Area of Plan is = 2130 m2. -Plan is contains pour strip and this project according to Euro-code 2004. -Full design of all floors by using Ram Concept v6.0 as a Post Tension Slab and I doing all checks (Seismic, Temperature, etc)
Design of RESIDENTIAL BUILDING with Post Tension By RAM Pro.
6020252
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
The connection analysis and Design of Eaves Haunch between Column and Rafter was carried out using the Finite Element Method (Program PROKON 3D modelling). A 3D- FEM was constructed considering the Eaves Haunch.According to BS5950-1990 Code.
Design of Eaves Haunch By Program PROKON 3D modelling.
6020218
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
Design the Connection Between Column and Foundation (Base Plate). Column Section (UKB 610X229X125)(British Sections) & Steel Grade 355 Assume S weld = 6 mm & Fu= 5.10 t/cm2 & Fy = 3.55 t/cm2 The connection analysis of the Building between column and foundation was carried out using the Finite Element Method (Program RAM-Connection 3D modelling). A 3D- FEM was constructed considering the Base Plate. Dead load, Permanent load and wind loads were considered as uniformly distributed loads, and manual calculation for it too.
Design the Base Plate Connection with RAM Connection
4891397
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)
This the construction is part of wast water treatment station. It consist of walls,columns,raft foundations,isolated footings and slabs. I designed this construction in SAP 2000 by 3D modeling.
3D MODELING FOR SCREENING STRUCTURES ( WATER STRUCTURES)

评论

变更已保存
展示2中的1-2条评论
 筛选评论规则：
5.0
$50.00 USD
Project for Ahmed S. -- 3
Thank you eng. Ahmed . Pleased working with you. Hope to you all the best.
Scientific Research
Sports
Finite Element Analysis
Arabic Translator
+1更多
用户头像
的国旗 Adil A.
@adilalsaeed
•
4 年前
5.0
$100.00 USD
Project for Ahmed S.
It was of my great pleasure working with Ahmed Sayid. Serious, cooperative and well understanding. I highly recommend to hire, and will hire again sure.
Scientific Research
Sports
Finite Element Analysis
Arabic Translator
+1更多
用户头像
的国旗 Adil A.
@adilalsaeed
•
4 年前

经验

Junior Structural Engineer

Sanitary & Environmental Engineering Consultant Offic (SEECO)
4月 2018 - 现在
I work as a junior engineer in structure department and designed alot of projects such as ( Pump Station , Treatment Station , Servic Buildings , Water Structures , Water Tanks, Frames ,......etc) and Schedule for all bulidings .

Junior Structural Engineer

Arabia for Design and Engineering Consulting (ADEC)
11月 2017 - 2月 2018 (3 个月, 1 天)
I work as a junior design engineer and I designed some of buildings such as * Tabarak Residential Compound 90 Avenue (D7,8). _ Full design of superstructure by using Etabs,and check of it apply for all loads. _ Full design of Post Tension Slabs by using ADAPT Builder2015 , Calculate No. of Cables and Strands and check of it apply for all loads and check stress. _ Full design of substructure (Foundations) such as raft , isolated footing ,..etc by using SAP200 and Safe.

教育

Bachelor of Civil Engineering,Structural Department.

Al-Azhar University, Egypt 2011 - 2016
(5 年)

联系Ahmed S.询问您的工作详情

登录并通过聊天讨论所有细节。

认证

优选威客
身份已验证
支付已验证
电话已验证
邮箱已验证
Facebook已关联

顶级技能

Civil Engineering
Structural Engineering
Construction Engineering

浏览相似威客

Civil Engineers in Saudi Arabia
Civil Engineers
Structural Engineers
Construction Engineers

浏览相似作品

Civil Engineering
Structural Engineering
Construction Engineering
之前的用户 下一个用户
邀请已发送成功！
谢谢！我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
Freelancer标志 P.R. China / 中文(简体) 帮助和支持 威客分类项目竞赛威客企业会员优选威客计划项目管理本地工作Photo Anywhere 作品展示开发人员API获得认证桌面APP 关于关于我们如何运作安全投资方网站地图故事消息团队奖励新闻发布职业 条款隐私政策条款和条件版权政策行为准则费用及收费合伙人Escrow.comLoadshiftWarrior Forum 应用程序苹果APP商城图标Google Play标志
复制到剪切板失败，请修改权限后重试。
复制到剪贴板。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出，请再次登录。