Freelancer标志它是如何运作的 浏览工作
登录 注册
发布项目
个人资料封面照片
您正在关注
关注用户错误。
该用户不允许他人关注他们。
您已经关注了这个用户。
您的会员计划仅允许0个关注。升级在此。
成功取消关注
取消关注用户错误
您已成功推荐
推荐用户错误。
出问题了，请刷新页面并重新尝试。
电子邮箱已成功验证。
用户头像
$45 USD / 小时
CHINA的国旗
china
$45 USD / 小时
目前这里是11:34 上午
七月 25, 2018已加入
0 推荐

Wu S.

@AlanWush

 0.0 (1条评论)
0.0
0.0
100%
100%
$45 USD / 小时
CHINA的国旗
china
$45 USD / 小时
不适用
工作已完成
不适用
在预算内
不适用
按时
不适用
重复雇用率

Embedded Software and PCB development expert

Your product is set to change the world. To me, great design means not just having deep technical skills,but also developing with the highest standards and best experience. I have been electronic design for over 15 years. 1. Electronic component selection, circuit design (Arduino，ARM，MCU， Atom，FPGA，DSP，DDR，Power，Keyboard，Motor，LCD，USB 3.0，HDMI，RS485，RJ45，RF，GSM，GPRS，WIFI，Bluetooth) and circuit simulatio,rofessional software such as Altium/Eagle/Allegro/OrCAD/Capital (1~8 layers PCB) . 2. Software Development (IAR/Keil/Atollic/Eclipse) by ARM，FPGA，DSP，MCU，STM32，PIC and more in Windows or Linux. 3. Software User Interface Design (Python,VC++,C++，etc.). 4.artificial intelligence and robotics - deep learning platforms by Tensorflow；Model framework by CNN, RNN, LSTM, FCN, RL, VGG16, ResNet ; 5. Product Specification, Test Reports and BOM 6. EMC. 7. Full System Design - Concept to fully tested, evaluated and developed product. My goal: Deliver excellent quality to delight my clients !
Freelancer Data Entry Clerks China
查看所有Data Entry Clerks在China

联系Wu S.询问您的工作详情

登录并通过聊天讨论所有细节。

文件夹

4314760
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
4328236
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
USB/HDMI video booth
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
4921785
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
4345024
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/2A or 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/2A or 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with three ports
4345394
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
Altium: The smartphone charger 2 with three ports
4345367
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
Altium: The smartphone charger with four ports
Altium: The smartphone charger with four ports
4314760
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
1. This project have ARM，DDR，Power，LCD display, USB, microphone, CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for the Samsung, Qualcomm and MTK the tablet's circuit design, PCB layout(6 layers or 8 layers PCB) and EMC/EMI Test and embedded software design in the different projects.
Tablet PC
4328236
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
USB/HDMI video booth
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
1. This project have ARM，DSP，DDR，Power，LCD display, USB, HDMI, TF card, microphone, keypad, 5 million pixel CMOS sensor and lithium battery charging and discharging functions. 2. I was independently responsible for circuit design ，PCB layout ( 800 PCS electronic components and 8 layers PCB) and embedded software design.
USB/HDMI video booth
4921785
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
Embedded Software Design: Software Development - firmware in C languages by Keil. The whole embedded software system is more than 5000 lines of program source code. The sum of all the lines of source code in the screenshots below is more than 5,000 lines.
Embedded Software
4345024
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/2A or 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
Altium: The smartphone charger with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/2A or 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with three ports
4345394
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), one port output Type-C (5V/3A), one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger 2 with three ports
Altium: The smartphone charger 2 with three ports
4345367
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
1. The smartphone charger supports AC 100-280V input, with 3 USB charging ports, one port output QC3.0 (3.6-12V, 3A), two port output 5V/2A, one port output 5V/1A. 2. Supports fast charging protocols and charging ports such as QC3.0/QC2.0/ HUAWEI FCP/Apple 5V 2.4A/MTK PE+1.1/PE+2.0 /Type-C and so on, which almost supports fast charging of all mobile phones. 3. I am independently responsible for the selection of electronic components, circuit design, PCB Layout, power performance and function debugging (overvoltage protection, overcurrent protection, overload protection, overheating protection and short circuit protection, efficiency improvement, aging test, etc.), EMC test and CE/CCC/UL authentication
Altium: The smartphone charger with four ports
Altium: The smartphone charger with four ports
Altium: The smartphone charger with four ports

评论

变更已保存
展示1中的1-1条评论
 筛选评论规则：
0.0
$250.00 USD
Project 19260286 has been deleted
The project is not completed according to the dispute
用户头像
的国旗 N H.
@nhzgroup
•
5 年前

经验

chief engineer

Shenzhen FuTaiLong Industrial Co., Ltd.
2月 2013 - 3月 2019 (6 年, 1 个月)
1. Responsible for Various Electronic products（Robotics，BLE，ioT，etc.） and Electrical equipment，electronic components selection, circuit design, PCB Layout, Embedded System Design, EMC/ESD testing and certification. 3. Formulate product development and testing standards and specifications, and supervise implementation. 4. Responsible for solving the technical problems in the development process quickly.

Senior Engineer

Shenzhen Haolixin Industrial Co., Ltd.
8月 2007 - 1月 2013 (5 年, 5 个月)
1, Responsible for find and compare almost all chips at home and abroad, and finally propose feasible solutions to define product development. 2. Responsible for new product electronic components selection, circuit design, PCB Layout, Embedded Software Design, EMI/EMS testing and CE/CCC/FCC/UL/GS certification. 3. Responsible for solving the technical problems in the development process quickly.

Electronic Engineer

XiangDe electronic technology (Shenzhen) Co., Ltd.
7月 2005 - 7月 2007 (2 年)
1, Solve the key problems and technical problems of R & D. 2, Electronic components selection, circuit schematic modification, PCB Layout, MCU C programming and debugging, EMC testing and certification.

教育

Bachelor of Engineering

South China University of Technology, China 2001 - 2005
(4 年)

联系Wu S.询问您的工作详情

登录并通过聊天讨论所有细节。

认证

优选威客
身份已验证
支付已验证
电话已验证
邮箱已验证
Facebook已关联

顶级技能

Data Entry
Wireless
Engineering
Electronics
Excel

浏览相似威客

Data Entry Clerks in China
Data Entry Clerks
Wireless Engineers
Engineers

浏览相似作品

Data Entry
Wireless
Engineering
Electronics
之前的用户 下一个用户
邀请已发送成功！
谢谢！我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
Freelancer标志 P.R. China / 中文(简体) 帮助和支持 威客分类项目竞赛威客企业会员优选威客计划项目管理本地工作Photo Anywhere 作品展示开发人员API获得认证桌面APP 关于关于我们如何运作安全投资方网站地图故事消息团队奖励新闻发布职业 条款隐私政策条款和条件版权政策行为准则费用及收费合伙人Escrow.comLoadshiftWarrior Forum 应用程序苹果APP商城图标Google Play标志
复制到剪切板失败，请修改权限后重试。
复制到剪贴板。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出，请再次登录。