个人资料封面照片
您正在关注
关注用户错误。
该用户不允许他人关注他们。
您已经关注了这个用户。
您的会员计划仅允许0个关注。升级在此。
成功取消关注
取消关注用户错误
您已成功推荐
推荐用户错误。
出问题了,请刷新页面并重新尝试。
电子邮箱已成功验证。
用户头像
$15 USD / 小时
TURKEY的国旗
istanbul, turkey
$15 USD / 小时
目前这里是11:40 上午
十二月 28, 2013已加入
1 建议

Dervis Y.

@cesur135

verified.svg
4.6 (32条评论)
5.6
5.6
75%
75%
$15 USD / 小时
TURKEY的国旗
istanbul, turkey
$15 USD / 小时
85%
工作已完成
95%
在预算内
90%
按时
5%
重复雇用率

electr.electronics &Cont.Automation&Software Eng.

I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the automation scenario and then I worked with the SIEMENS WinCC SCADA program to monitor and control the system. I used the SIEMENS PH & INFORMATION SERVER program to report the units on a monthly, monthly and yearly basis and prepared templates for the reports. I did (PTP) point to point tests and automation tests when the units were switched on. I drew the Electricity Projects with the E plan P8 V2.6 program. In the field of process automation, I used the DELTA PLC program and the ABB PLC program to control each piece of equipment in the factory. In Energy Automation, I also worked in HES projects where I made the generators PLC and SCADA system. Ventilation systems of plants and enterprises were made according to the temperature of the environment, according to the working information of the machines and according to other factors. Ventilation system entered the circuit and worked in a certain place. I usually used ABB AC500 PLC program and ABB & SIEMENS drivers when doing these systems. I install &Comission Chocolate Machines,lines.And test all equipment then commission about process follow. I used Honeywell DCS C200 in iron steel industry and I comissioned this systems about part by part units In the field of electricity, I work actively in the fields of electric panel works, electricity projects and field applications of small enterprises in general. I used OMRON PLC some factory application with given scenario I wrote plc to control each equipment and depend on sensor etc.. I set up on the field instruments, configuration upper and lower limit values during setup, setup analogue 4.20 mA, 0-10 V. I made work such as parameter setting of ABB & SIEMENS drivers and softstarters. In Machine Automation ,I have done projects like machine process Automation and writing software depositor and other part of machines and there I used AB PLC –RS Logix 5000 and Factory talk.

联系Dervis Y.询问您的工作详情

登录并通过聊天讨论所有细节。

文件夹

6655050
6655031
6655050
6655031

评论

变更已保存
展示32中的1-5条评论
筛选评论规则:
5.0
₹56,250.00 INR
Understood the work and was prompt in communication
C Programming
Microcontroller
Embedded Software
PCB Layout
Embedded Systems
V
的国旗 Aayushman G.
@VGsolar
4 个月前
5.0
€800.00 EUR
Extremely dedicated person, friendly and huge Siemens know-how.
Motor Control
PLC
Siemens NX
F
的国旗 Flavio H.
@flaviologistik
4 个月前
5.0
$215.00 USD
Good worker with hi knowledge
Electronics
Microcontroller
PLC & SCADA
Electrical Engineering
PCB Layout
O
的国旗 Omar T.
@omaraltimary
5 个月前
4.6
₹21,000.00 INR
Dervis is an expert in his field and clearly identifies and solves the given problem. He is also able to suggest improvements on the asked requirement. If you are looking for a PLC programmer, he would be a great fit.
Engineering
Electronics
PLC & SCADA
Electrical Engineering
PLC
G
的国旗 Arun P.
@gunnerforlife52
9 个月前
0.0
$140.00 USD
The project is not completed according to the dispute
用户头像
的国旗 Ahmed A.
@AhmedKh97
9 个月前

教育

3.86

Gaziantep Üniversitesi, Turkey 2009 - 2014
(5 年)

资质

PLC&SCADA

SIEMENS
2014
CERTIFICATE HAS BEEN TAKEN FROM SIEMENS

software

bilge adam
2013

java

netaş telecominication A.Ş
2013

出版物

wind trubine

sabah
wind tubine was designed by qualıty team

联系Dervis Y.询问您的工作详情

登录并通过聊天讨论所有细节。

认证

优选威客
身份已验证
支付已验证
电话已验证
邮箱已验证
Facebook已关联
之前的用户 下一个用户
邀请已发送成功!
谢谢!我们已通过电子邮件向您发送了索取免费积分的链接。
发送电子邮件时出现问题。请再试一次。
已注册用户 发布工作总数
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
加载预览
授予地理位置权限。
您的登录会话已过期而且您已经登出,请再次登录。