Circuit schematic for a simple powersupply with battery backup
$30-250 USD
已取消
已发布大约 11 年前
$30-250 USD
货到付款
My requirement is very simple, I need a schematic for a powersupply with battery backup; Following are the specification
Input: 230V 50Hz, (A step down transformer will be used as per the designers requirement, preferably 18V)
Output: 12V and 5V 2A each
Battery: 12V 1.3ah lead acid battery.
Working should be as described below,
- when connected to power the outputs are available and the battery is trickle charged.
- when main power is off, automatically switched to source from battery.
- Output should be cutoff before the battery depletes, in short battery should be safe.
- Output should be stable and should be reliable as this will be used to power microcontrollers and reliability is a MUST.
- Polarity, transient I&V and shortcircuit protection.
An expert in analog circuits will require only few minutes in completing this work. Shall pay you 500 RS around $10.
Note: you may send me the circuit as picuture or as you like, only thing is that it should be legible and all components spec should be made clear.